Protect2Clean by IAB

The SimTec® NG030-S PurpleRed nitrile cleanroom glove is a gamma sterilised glove with textured fingers and palm. Specifications Nitrile polymer; accelerator free, powder free Hand specific, rolled edge, texturised palm and fingers Size: 6.0 - 10.0 Colour: Purple Red Thickness Fingertip 0.16 ± 0.02 mm Palm 0.14 ± 0.02 mm Cuff 0.09 ± 0.02 mm Length: 300 ± 10 mm Particles: <3000 per cm² > 0.5 µm Area of application: ISO 5 | GMP A/B Packaging Bag with "easy tear opening" 1 pair per PE bag 20 PE bags per sealed (double) polybag 200 pairs per box

The SimTec® NG030-S nitrile cleanroom glove is a gamma sterilised glove with textured fingers and palm. Specifications Material: Nitrile polymer; Accelerator free, powder free Design: Hand specific, rolled edge, texturised palm and fingers Size: 6.0 - 10.0 Colour: Neon green Thickness Fingertip 0.16 ± 0.02 mm Palm 0.14 ± 0.02 mm Cuff 0.09 ± 0.02 mm Length: 300 ± 10 mm Particles: <1200 per cm² > 0.5 µm Area of application: ISO 5 | GMP A/B Packaging Bag with "easy tear opening" 1 pair per PE bag 20 PE bags per sealed (double) polybag 200 pairs per box

The Nitrile Cleanroom Glove SimTec® NG030 PurpleRed is a glove with textured fingers and palm. Material & properties Nitrile polymer; accelerator-free, powder-free Hand-specific, rolled edge, textured palm and fingers PurpleRed Length: 300 ± 10 mm Particles: <3000 per cm² > 0.5 µm Thickness Fingertip 0.16 ± 0.02 mm Palm of the hand 0.14 ± 0.02 mm Cuff 0.09 ± 0.02 mm Packaging Bag with "easy tear opening" 1 pair per PE bag 20 PE bags per sealed (double) polybag 200 pairs per box

Our new SimStep Tough permanent adhesive mat is a high-performance decontamination mat with outstanding properties and extreme resilience, also suitable for forklift trucks. Full service - for you right from the start. Consultancy, planning, project management. Our specially trained installation team will support you with your SimStep project right through to professional installation. If you wish, we can also regularly check the performance of the installed SimStep mats directly on your premises. Ask for your personalised offer! Features Colour: Grey Long service life - 5+ years on average No size or area limits Easy to maintain Low profile mat design Fully sealed surface; bordered by black bevelled edge strips No outgassing from polymer - 100% DOP free Safe for all cleanroom environments Antimicrobial technology that prevents the growth of bacteria Low profile yet highly stable mat can withstand heavy trolleys, pallet trucks and even forklift traffic Advantages Reduces the number of particles and germs Environmental savings - replaces disposable adhesive mats, reduces waste and eliminates labour for consumables to be produced and delivered Significantly reduces air pollution Correct placement of the SimStep mat prevents cross-contamination The polymer surface provides a comfortable walking surface 3 steps or 3 wheel rotations guarantee 100% particle and bacteria removal Complete decontamination in large and unavoidable control zones Does not lose effectiveness even after repeated use Disposable overshoes do not get stuck No transfer of adhesive to critical areas SimStep mats are recyclable Maximum economic efficiency Cost savings due to elimination of purchasing, storage and replacement of conventional peel-off adhesive mats Technical data Mat width: approx. 200 cm (+6.4 cm edge material per side) Length: 100-1000 cm (can be ordered in increments of 10, +6.4 cm edge material per side), but can easily be cut to the desired dimensions Thickness: approx. 2.6 mm Surface resistance: 108 Ohm Load capacity: approx. 130 kg/cm2 Heat resistance: 0-52°C In addition to the mat, the scope of delivery also includes adhesive and edging material.

Our new SimStep permanent adhesive mat is a high-performance decontamination mat with outstanding properties. Full service - for you right from the start. Consultancy, planning, project management. Our specially trained installation team will support you with your SimStep project right through to professional installation. If you wish, we can also regularly check the performance of the installed SimStep mats directly on your premises. Ask for your personalised quote! Features Colour: Grey Long service life - 5+ years on average No size or area limitation Easy to maintain Low profile mat design Fully sealed surface; bordered by black bevelled edge strips No outgassing from polymer - 100% DOP free Safe for all cleanroom environments Antimicrobial technology that prevents the growth of bacteria Low profile yet highly stable mat can withstand heavy trolleys and pallet trucks Advantages Reduces the number of particles and germs Environmental savings - replaces disposable adhesive mats, reduces waste and eliminates labour for consumables to be produced and delivered Significantly reduces air pollution Correct placement of the SimStep mat prevents cross-contamination The polymer surface provides a comfortable walking surface 3 steps or 3 wheel rotations guarantee 100% particle and bacteria removal Complete decontamination in large and unavoidable control zones Does not lose effectiveness even after repeated use Disposable overshoes do not get stuck No transfer of adhesive to critical areas SimStep mats are recyclable Maximum economic efficiency Cost savings due to elimination of purchasing, storage and replacement of conventional peel-off adhesive mats Technical data Mat width: approx. 200 cm (+6.4 cm edge material per side) Length: 100-1000 cm (can be ordered in increments of 100, +6.4 cm edge material per side), but can easily be cut to the desired dimensions Thickness: approx. 2 mm Surface resistance: 108 Ohm Load capacity: approx. 90 kg/cm2 Heat resistance: 0-52°C In addition to the mat, the scope of delivery also includes adhesive and edging material

Our new SimStep permanent adhesive mat is a high-performance decontamination mat with outstanding properties. Full service - for you right from the start. Consultancy, planning, project management. Our specially trained installation team will support you with your SimStep project right through to professional installation. If you wish, we can also regularly check the performance of the installed SimStep mats directly on your premises. Ask for your personalised quote! Features Colour: Grey speckled Long service life - 5+ years on average No size or area limitation Easy to maintain Low profile mat design Fully sealed surface; bordered by black bevelled edge strips No outgassing from polymer - 100% DOP free Safe for all cleanroom environments Antimicrobial technology that prevents the growth of bacteria Low profile yet highly stable mat can withstand heavy trolleys and pallet trucks Advantages Reduces the number of particles and germs Environmental savings - replaces disposable adhesive mats, reduces waste and eliminates labour for consumables to be produced and delivered Significantly reduces air pollution Correct placement of the SimStep mat prevents cross-contamination The polymer surface provides a comfortable walking surface 3 steps or 3 wheel rotations guarantee 100% particle and bacteria removal Complete decontamination in large and unavoidable control zones Does not lose effectiveness even after repeated use Disposable overshoes do not get stuck No transfer of adhesive to critical areas SimStep mats are recyclable Maximum economic efficiency Cost savings due to elimination of purchasing, storage and replacement of conventional peel-off adhesive mats Technical data Mat width: approx. 200 cm (+6.4 cm edge material per side) Length: 100-1000 cm (can be ordered in increments of 100, +6.4 cm edge material per side), but can easily be cut to the desired dimensions Thickness: approx. 2 mm Surface resistance: 108 Ohm Load capacity: approx. 90 kg/cm2 Heat resistance: 0-52°C In addition to the mat, the scope of delivery also includes adhesive and edging material

The premium version of our Vipers® PC68 cleanroom cleaning cloth is made from a calendered, high-quality material. It is an economical all-purpose wipe and can be autoclaved for sterile areas. Properties Economical all-purpose wipe for cleaning smooth surfaces Absorbent, soft and resistant Steam autoclavable Good compatibility with IPA and other solvents High quality calendered material Double-packed Recommended for use in ISO 5-8 cleanrooms Technical data Material: 55% cellulose | 45% polyester Base weight: 68 ± 3 g/m² Colour: White Thickness: 0.28 - 0.32 mm Edge cut: Laser cut Absorption capacity: ≥ 288 ml/m² Absorption speed: ≤ 1.0 sec Extractable substances: IPA: 0.051 g/m² DIW 0.006 g/m² Ion content: Sodium (Na): 20.90 ppm Potassium (K): 4.36 ppm Magnesium (Mg): 1.31 ppm Calcium (Ca): 7.10 ppm Chloride (Cl): 37.35 ppm FTIR: No Silicon Oil, Amide and DOP detected Particle release: LPC ≥0.5 µm | 69.09 x 10⁶ particles/m² Fibre release: Fibres >100 µm | 0.519 x 10³ fibres/m² Application range* PC68 Premium: ISO 5 Packaging 300 pieces in a bag 12 bags in a carton

The VIPERS® StarSat VPC68 cleanroom wipe is a non-woven wipe impregnated with IPA in a resealable bag. Material & properties Material: 55% cellulose / 45% polyester Length: 230 mm Width: 230 mm Thickness: 0.30 mm ± 0.02 mm Colour: white Base weight: 68 g/m2 ISO 5 Edge cut: Laser cut 70 % IPA (isopropyl alcohol) and 30 % deionised water (DIW) Absorption capacity: 288 ml/m2 For wiping and cleaning in critical environments Increases solvent control and accountability Packaging 50 pieces in a resealable bag 24 sachets in a box

The VIPERS® SPC68 cleanroom wipe is an economical all-purpose sterile cleanroom wipe. It is highly absorbent, resistant, soft and wipes without leaving scratches. It can be used wet or dry. Suitable for use with isopropanol and other solvents. Very low particle and ion release, free of silicone oil and amides. Can be used in the pharmaceutical, biotechnology, optics and semiconductor industries. Properties Perfect combination of outstanding strength and exceptional absorbency Economical non-woven all-purpose wipe for cleaning smooth surfaces Also available sterile: SPC68; red indicator dot for recognising sterility, lot. No. on each label and individual bag, gamma irradiated and sterile according to AAMI guidelines Absorbent, soft and resistant Good compatibility with IPA and other solvents Ideal for cleaning wet surfaces Double-packed Technical data Material: 55% cellulose | 45% polyester Base weight: 68 ± 3 g/m² Colour: White Thickness: 0.28 - 0.32 mm Edge cut: Laser cut Absorption capacity: 288 ml/m² Absorption speed: ≤ 1.0 sec Extractable substances IPA: 0.007 g/m² DIW: 0.055g/m² Ion content Sodium (Na): 45.04 ppm Potassium (K): 7.53 ppm Magnesium (Mg): 14.43 ppm Calcium (Ca): 14.46 ppm Chloride (Cl): 56.02 ppm FTIR: No silicone oil, amide and DOP detected Particle release: LPC ≥ 0.5 µm | 75 x 10⁶ particles/m² Fibre release: Fibres > 100 µm | 0.638 x 10³ fibres/m² Range of application* PC68 | SPC68 sterile: ISO 5-8 | GMP A/B Packaging 5 x 20 wipes in a bag 15 bags in a carton

The Vipers P115 cleanroom wipe is a lightweight polyester wipe with a wide range of uses. It is suitable for wiping and cleaning in critical environments. Properties Ideal for general wiping and cleaning in critical environments High absorption capacity Also available sterile: SP115; red indicator dot for proof of sterility, lot. No. on each label and individual pouch, gamma irradiated and sterile according to AAMI guidelines Lightweight polyester wipe Good absorbency, wiping efficiency and abrasion resistance Double-packed Technical data Material: 100% polyester continuous filament yarn Base weight: 115 ±5 g/m² Colour: White Thickness: 0.48 - 0.56 mm Edge cut: Laser cut Absorption capacity: ≥ 310 ml/m² Absorption speed: ≤ 0.5 sec Extractable substances: IPA: 0.003 g/m² DIW: 0.0128 g/m² Ion content: Sodium (Na): 0.081 ppm Potassium (K): 0.046 ppm Magnesium (Mg): 0.00001 ppm Calcium (Ca): 0.00001 ppm Chloride (Cl): 0.027 ppm FTIR: No silicone oil, amide and DOP detected Particle release: LPC ≥0.5 μm | 7.0 x10⁶ particles/m² Fibre release: Fibres >100 μm | 0.593 x 10³ fibres/m² Range of application* P115/SP115: ISO 4 - 8 | GMP A/B Packaging 150 wipes in one bag 10 bags in a carton

The VIPERS® PC68 Cleanroom Wipe is an economical all-purpose sterile cleanroom wipe. It is highly absorbent, resistant, soft and wipes without leaving scratches. It can be used wet or dry. Suitable for use with isopropanol and other solvents. Very low particle and ion release, free of silicone oil and amides. Can be used in the pharmaceutical, biotechnology, optics and semiconductor industries. Properties Perfect combination of outstanding strength and exceptional absorbency Economical non-woven all-purpose wipe for cleaning smooth surfaces Also available sterile: SPC68; red indicator dot for recognising sterility, lot. No. on each label and individual bag, gamma irradiated and sterile according to AAMI guidelines Absorbent, soft and resistant Good compatibility with IPA and other solvents Ideal for cleaning wet surfaces Double-packed Technical data Material: 55% cellulose | 45% polyester Base weight: 68 ± 3 g/m² Colour: White Thickness: 0.28 - 0.32 mm Edge cut: Laser cut Absorption capacity: 288 ml/m² Absorption speed: ≤ 1.0 sec Extractable substances IPA: 0.007 g/m² DIW: 0.055g/m² Ion content Sodium (Na): 45.04 ppm Potassium (K): 7.53 ppm Magnesium (Mg): 14.43 ppm Calcium (Ca): 14.46 ppm Chloride (Cl): 56.02 ppm FTIR: No silicone oil, amide and DOP detected Particle release: LPC ≥ 0.5 µm | 75 x 10⁶ particles/m² Fibre release: Fibres > 100 µm | 0.638 x 10³ fibres/m² Range of application* PC68 | SPC68 sterile: ISO 5-8 | GMP A/B Packaging 5 x 20 wipes in a bag 15 bags in a carton

These goggles are designed for use in rooms with controlled contamination such as sterile and clean rooms.Among other uses, it is also used in aseptic conditions, including but not limited to the chemical, pharmaceutical, electronic industries or hospital laboratories. These goggles are designed to withstand multiple sterilisation in an autoclave without any noticeable changes. The careful design allows for long service life and maximum transpiration, offering a wide field of vision and use over all prescription eyewear. Material & Properties Material: Polycarbonate / Silicone Lens thickness: 1.8 mm Nose piece width: 50 mm Nose piece height: 20 mm Total width: 175 mm Total height: 85 mm Headband thickness: 2 mm Headband width: 11.8 mm Colour: blue / transparent Sterilisable in autoclave under steam. Lens, frame and band are resistant to 40 cycles autoclave (121'C, 110kPa, 20min). The lens is replaceable. The frame is made of thermoplastic rubber which remains stable even during multiple sterilisations 11.8 mm wide silicone strap with 2 mm thick adjustable strap length with a polycarbonate snap clip. Wide panoramic field of vision made of impact-resistant polycarbonate, high-quality anti-fog lens Indirect ventilation on the top of the goggles to protect against chemical splashes Compatible or fits on most prescription glasses Packaging 1 piece

The Vipers® MF100 microfibre cloth is ideal for cleaning scratch-sensitive surfaces. It has excellent absorbency and particle absorption as well as high chemical resistance. Its wedge-shaped cross-section acts as a squeegee with excellent contact with the surface to be cleaned and produces excellent absorbency and particle entrapment. Properties Very low particle release, residue and low ion content High chemical resistance Excellent absorbency and particle absorption Its wedge-shaped cross-section acts like a scraper and ensures optimum contact with the surface to be cleaned, excellent absorption capacity and particle entrapment Cleaning of spectacle lenses and sensitive surfaces in the optics and display industry Solvent-safe, double and vacuum-packed Recommended for use in cleanrooms in accordance with ISO 4 Technical Data Material: 80% polyester and 20% nylon Base weight: 100 ± 10 g/m² Colour: White Thickness: 0.21 - 0.25 mm Edge cut: Laser sealed Absorption capacity: ≥ 218 ml/m² Absorption speed: ≤ 2.0 sec Extractable substances IPA: 0.069 g/m² DIW: 0.018 g/m² Ion content: Sodium (Na): 0.748 ppm Potassium (K): 0.520 ppm Magnesium (Mg): 0.814 ppm Calcium (Ca): 1.013 ppm Chloride (Cl) 0.371 ppm FTIR: No silicone oil, amides and DOP detected Particle release: LPC ≥0.5 μm | 35 x 10⁶ particles/m² Fibre release: Fibres >100 μm | 0.058 x 10³ fibres/m² Application range* MF100: ISO 4 Packaging 100 wipes in one bag 10 bags in a carton (1000 wipes)

Cleaning swab / microfibre swab PS3900 with single rounded head. The Mini Swab is made from a single layer of microfibre that is free from organic contaminants such as silicone, amides or phthalate esters. The fabric is thermally bonded to the handle, avoiding the use of contaminating adhesives or coatings. The polyester, which is washed and packaged in an ISO Class 5 cleanroom, has a low particle and ionic content. It has excellent compatibility with most common solvents, including acetone, as well as excellent absorbency and solvent absorption capacity. The head is designed for cleaning small, slotted and recessed areas. Excellent cleaning is controlled and supported by a flexible paddle. The swabs are designed for general cleaning and are the ideal swabs for cleaning components or parts. Material & Features Head material: Single knitted microfibre Head width 2.2 mm Head thickness 1.2 mm Head length 10.0 mm Handle material: Polypropylene Handle width 2.2 mm Handle length 62.0 mm Total length 72.0 mm Particles, easily releasable Particles 0.5 µm <3000 counts/swab Free from silicone, amide and DOP Low non-volatile residues Low particle and ion content Good absorbency Compatible with most common solvents No contaminating adhesives or coatings Micromechanical cleaning Remove dirt from drives Effectively clean small, hard-to-reach areas with solvents such as IPA Remove flux residues and excess materials For general cleaning Packaging 500 pieces in a bag 50 bags in a box

Cleaning swab PS3605 with semi-circular double-layer knitted polyester head. This swab has a symmetrical, round tip that is ultrasonically welded to an injection moulded white polypropylene handle. It is abrasion-resistant and lint-free, making it a reliable cleaning applicator for your cleanroom or critical environment. The swab can be used for cleaning residues/particles on scratch-sensitive surfaces. Particularly ideal in optics, laser or microtechnology. This swab has good chemical resistance and can be used with isopropanol, acetone etc. without hesitation. Material & properties Material head: Washed, two-ply knitted polyester Handle material: Polypropylene Diameter head: 5.15 mm Diameter of handle: 3.05 mm Length of head: 19.84 mm Handle length: 149.23 mm Total length: 152.4 mm Semicircular double-layer knitted polyester head Symmetrical round tip Non-abrasive Ultrasonically dampened edges Good wear resistance Can be used with IPA, acetone or other solvents Chemically resistant Low non-volatile residues Low particle formation Lint free Application of adhesives or other liquids Removal of residues and particles Bonding: ultra-welded Packaging 100 pieces in a double-wrapped bag 10 bags in a carton

The VMP50 disposable mop is a high-quality, non-sterile microfibre mop. The Vipers VMP50 mop has an extremely high-quality microfibre trim material made from 100% micro polyester. Thanks to its special surface structure, this disposable mop impresses with its outstanding cleaning performance, accurate surface coverage and excellent value for money. Material & properties Material: Micro polyester / microfibre Colour: White Length: 400 mm Width: 125 mm Weight: 50 g (+/- 5%) ISO 4 GMP C/D Absorption capacity > 400%, max. 743% (5684 ml/²) Compatible for use with solvents such as IPA Application/area of use Recommended for cleaning and decontamination of GMP rooms/cleanroom environments Cleanroom mop with pockets, for 40 cm mop systems Highest cleaning performance due to high-quality microfibre High area performance thanks to multi-layered liquid reservoir Even and ideal liquid release Packaging 5 pieces in a bag 20 bags in a box (100 pieces)

Nitrile Cleanroom glove SimTec® NG040-S is a gamma sterilised glove with textured fingers and palm. Material & properties Nitrile polymer; accelerator free, powder free Hand-specific, rolled edge, texturised palm and fingers White Length: 400 ± 10 mm Particles: <1200 per cm² > 0.5 µm Thickness Fingertip 0.18 ± 0.02 mm Palm of the hand 0.15 ± 0.02 mm Cuff 0.09 ± 0.02 mm Packaging Bag with "easy tear opening" 1 pair per PE bag 20 PE bags per sealed (double) polybag 8 poly bags per double-walled box 160 pairs per box

The SimSafe SAE07-S sterile sleeve protector has a thumb loop and is specially packaged for GMP-compliant clothing. The unique clean-sealed technology ensures that barrier protection against particles and liquids is created even at weak points such as seams. Material & properties Material: 65 % polyethylene bicomponent fibre, 35 % polyester Length: 500 mm Colour: white ISO 4 GMP A/B CAT III Innovatively processed bicomponent material without additionally processed adhesives Unique clean-sealed technology Elasticated ends Fully welded seams Excellent protection against cytostatics Antistatic Clean Available sterile and non-sterile Easy handling thanks to easy open bags Vacuum packed IPA-resistant bags Lot no. on each individual pack Packaging In pairs in individual bags 10 pairs in a bag 25 pouches in a carton

The Riverstone LE-TACKY is a nitrile cleanroom glove with very low residue values. Unlike other nitrile gloves, no sulphur or zinc oxides are added to the glove during manufacture. The very good stretch behaviour exceeds that of the nitrile gloves known to us to date - even that of some neoprene gloves by far. Material & properties Material: 100 % nitrile Colour: White Length: 300 mm Thickness: 0.08 mm +/- 0.02 mm Wearable on both sides ISO 4 Hardly extractable substances Powder-free Latex-free Textured fingertips Rolled edge Very low particle release Very stretchy, supple and non-slip Without plasticisers, contain no phthalate ester, silicone oil and amide Washed with 0.1m high-resistance water with> 17 MegaOhm water and packaged in an ISO 4 cleanroom environment Packaging 100 pieces per bag 10 pouches per carton  

Our SimTack dust control mats consist of 30 layers of self-adhesive PE film and reliably remove particles and fibres from shoe soles and castors. Thanks to the completely adhesive underside, the dust-binding mats adhere securely to the floor. If the top layer becomes soiled, it can simply be removed. SIMTACK white film adhesive mat (also known as Stickymat or Tackymat) for the transition from the grey room to the cleanroom. Material & properties Material: polyethylene film normal adhesive strength Colour white Total thickness approx. 1.5 mm Individual thickness approx. 0.045 mm water-based adhesive RoHs-compliant with indicator for remaining film on the mat 30 layers with indicator Packaging 1 mat with 30 layers of film 8 mats in a box

Antistatic cleanroom Cleaning Swab PU3921 with paddle-like 100 ppi polyurethane head. The foam is thermally bonded to the handle, eliminating the need for contaminating adhesives or coatings. This swab is free of silicone, amides and phthalates. The flexible head is lint-free and removes residue without scratching the surface. Washed and packaged according to cleanroom class 10 / ISO 4 Material & properties Head material: 100 ppi open-cell polyurethane foam Head width: 6.2 mm Head thickness: 5.1 mm Head length: 19 mm Head colour: white Handle material: polypropylene Handle width: 3.2 mm Handle length: 73 mm Handle colour: light green Head thermally welded to the handle, 100 ppi open-pore structure Overall length: 92 mm Can be used with acetone, IPA and other solutions Free from silicone, amides and phthalates Particles 0.5 um <3000 counts/swab Free from silicone, amide and DOP Low non-volatile residue Low particle and ion content Excellent solvent absorption capacity Compatible with most common solvents No contaminating adhesives or coatings Packaging 500 pieces in a bag 20 bags in a carton

The Vipers MF200 cleanroom wipe has a silk character and is suitable for very sensitive surfaces.It is made of polyester/nylon micro denier continuous filament and impresses with its very low particle emission, residue and low ion content. Material & properties Material: Polyester/nylon blended fabric (microfibre) Length: 230 mm Width: 230 mm Colour: white Thickness: 0.43 ± 0.05 mm Base weight 197 g/m² ISO 4 RoHS compliant Washable and autoclavable Ideal for applications that require maximum cleanliness Superior wiping performance for cleaning sensitive components or surfaces Double wrapped Laser-sealed edge cut Absorption capacity ≤ 300 ml/m2 Absorption speed ≤ 3 sec Packaging 100 wipes in a double-packed bag 10 bags in a carton (1000 wipes)

The SimCut Lite Fit cut protection glove is an uncoated thin glove that is ideal for use as an underglove. Despite its cut protection, this supple glove offers great freedom of movement and ideal dexterity. Material & properties Material: HPPE 79%, spandex 8%, nylon 12%, polyester 1% Length: 170 - 230 mm Thickness: 1.0 - 1.2 mm Thin glove with cut protection Ideal as an underglove Without coating Elasticated cuff Seamless knitted fabric High-quality HPPE fibre Extremely supple glove with cut protection and abrasion resistance Ideal dexterity Great freedom of movement ISO 7 KAT II Level values according to EN 388:2016 Abrasion resistance: Level 2 Cut resistance: Level 2 Tear resistance: Level 4 Puncture resistance: Level 1 Cut resistance: Level B Packaging 10 pairs in a bag 24 bags in a box (240 pairs)  

The "stainless steel metal rail" is a border material for your SimStepMat. Suitable for extreme loading capacity, e.g. by forklift trucks. Material & Properties Material: stainless steel Length: 1000 mm Width: 100 mm Height: 3 mm Edges are lasered Bevelled Drilled Drill holes chamfered without further processing according to sample Packing 1 piece

The nylon/PU glove SimLite PALM is an extremely lightweight knitted assembly glove. It is very thin and therefore fits like a second skin, yet is still robust. The coated palm provides a secure grip. Material & properties Material: nylon Coating palm: Polyurethane Length: approx. 200 - 250 mm depending on size Colour: white Knitted 18 gauge Knitted cuff, individual cuff colour for each size Very thin like a second skin and yet robust Outstanding comfort and perfect fit Suitable for light assembly work Extremely light Packaging 10 pairs per bag 24 bags per box (240 pairs)

The SimTec® NGB030 cleanroom glove is a nitrile glove suitable for medical use. It has textured fingertips and can be worn on both sides. Material & properties Material: 100% nitrile Length: 300 mm Thickness: approx. 0.11 mm Colour: Blue ISO 5 GMP C/D PSA KAT III Hypoallergenic Low in particles Textured fingertips Powder-free Ambidextrous Batch on each pack Double wrapped pouches Chlorinated surface Standards and protection level CE 0197 - Cat. III EN 455: Medical gloves for single use EN 374-2: Level 2= AQL 1.5 EN 374-3: Liquid-tight gloves - tested for NaOH 40%=Level 6 ISO 374-5:2016: Protection against microorganisms Packaging 100 pieces in a bag (50 pairs) 10 bags in a box (500 pairs)

The Simstat Fit ESD glove is a protective glove with a special Belltron fibre. Due to its construction, this "sandwich fibre" is much more stable and durable than the coated polyamide fibre used in conventional ESD gloves. In the event of a fibre breakage of the sandwich fibre, there is a considerably lower risk of a short circuit in a component due to only 2 contact possibilities. Material & properties Material: Nylon/ Incorporated carbon fibre Length Depending on size approx. 210 - 240 mm ISO 7 KAT II Silicone-free Without coating Hand-specific Low-linting Coloured cuff Very high climate comfort high tactile sensitivity Surface resistance: 5x109 Ω Contact resistance: < 1.0 x 108 Ω Power levels: 0 1 3 1 Low lint Ideal protection for electronic components Packaging 10 pairs per bag 24 bags per box (240 pairs) Size: XS-XXXL

The Cleaning Swab Huby-340 BB-003 made of pressed cotton and pressed paper with a fine double pointed head. Due to its shape, this extremely absorbent swab is perfect for use in precision areas such as the laser and optics industry. The cotton material is naturally very resistant to chemicals and is well compatible with various solvents. Material & properties Head material: cotton Stem material: pressed paper Diameter head: 3 mm Diameter of handle: 1.5 mm Length head: 11 mm Handle length: 73 mm Total length: 79 +- 1 mm double hard head Packaging 25 pieces in a bag 100 bags in a box 20 boxes in a carton

The Han-Palm, IAB's own brand, is the perfect glove for working with smooth and slippery objects made of seamless, low-lint nylon. The coated palm provides a better grip while the uncoated back of the hand is breathable. Material & Properties Material: Nylon Polyurethane-coated palm Length: approx. 240 mm Colour: white ISO 7 PPE CAT. II Hand-specific High climate comfort and high tactile sensitivity Non-slip Low-linting Abrasion resistant Silicone-free Coloured cuff to differentiate between sizes Packaging 10 pairs per bag 24 bags per box (240 pairs)

Cleaning swab Huby-340 BB-002 made of pressed cotton with double round head. Due to its shape, this extremely absorbent swab is perfect for use in precision areas such as the laser and optics industry. The cotton material is naturally very resistant to chemicals and is well compatible with various solvents. Material & properties Head material: cotton Stem material: pressed paper Diameter head: 2.6 mm Diameter of handle: 1.5 mm Length head: 13.5 mm Length of handle: 48.5 mm Total length: 75 +- 1 mm fine double semicircular head Packaging 25 pieces in a bag 100 bags in a box 20 boxes in a carton

The Nitrile Cleanroom Glove SimTec® Sterile NG033-S is a sterile 330 mm long nitrile disposable glove with textured palm and fingers. Specifications Material: Nitrile polymer; accelerator, sulphur, and powder-free Hand-specific, beaded cuff, textured palm and fingers Size: 6.0 – 10.0 Colour: White Thickness: Fingertip 0.16 ± 0.02 mm Palm 0.14 ± 0.02 mm Cuff 0.09 ± 0.02 mm Length: 330 ± 10 mm Particles: <1200 per cm² > 0.5 µm Area of application: ISO 5 | GMP A/B Packaging Bag with "easy tear opening" 1 pair per PE bag 20 PE bags per sealed (double) polybag 200 pairs per box

Antistatic Cleanroom Cleaning Swab PU3920 with tapered 100 ppi polyurethane head. The foam is thermally bonded to the handle, eliminating the use of contaminating adhesives or coatings. This cleaning stick is free from silicone, amides and phthalates. The head is lint-free and removes residues/particles without scratching the surface. The cleaning swab is washed and packaged according to cleanroom class 10 / ISO 4 Material & properties Head material: 100 ppi open-cell polyurethane foam Handle material: polypropylene Physical characteristics Head thermally bonded to the handle Head width 3.2mm Head thickness 3.2mm Head length 10.0mm Handle width 2.7mm Handle length 66.0 mm Total length 76.0 mm ISO 4 Particles, easily detachable Particles 0.5 µm <6000 counts/swab Packaging 500 pieces in one bag 50 bags in a carton

The ESD Glove May Top is a breathable ESD nylon glove with copper yarn and very high conductive properties. It has a breathable back of the hand, making it very comfortable to wear. Material & Properties Material: 80% nylon / 20% copper yarn Coated fingertips with polyurethane Thickness of the fingertips: approx. 1.0 mm Length: depending on size approx. 210-243mm Colour: brown/white PPE CAT. II Elasticated cuff Breathable back of the hand Low-linting High wearing comfort Surface resistance: approx. 10³ Ohm EN 388 prEN 61430:2014 Packaging 10 pairs in a bag 24 bags in a box (240 pairs)

Our new SimStep permanent adhesive mat is a high-performance decontamination mat with outstanding properties. Full service - for you right from the start. Consultancy, planning, project management. Our specially trained installation team will support you with your SimStep project right through to professional installation. If you wish, we can also regularly check the performance of the installed SimStep mats directly on your premises. Ask for your personalised quote! Features Colour: Blue Long service life - 5+ years on average No size or area limits Easy to maintain Low profile mat design Fully sealed surface; bordered by black bevelled edge strips No outgassing from polymer - 100% DOP free Safe for all cleanroom environments Antimicrobial technology that prevents the growth of bacteria Low profile yet highly stable mat can withstand heavy trolleys and pallet trucks Advantages Reduces the number of particles and germs Environmental savings - replaces disposable adhesive mats, reduces waste and eliminates labour for consumables to be produced and delivered Significantly reduces air pollution Correct placement of the SimStep mat prevents cross-contamination The polymer surface provides a comfortable walking surface 3 steps or 3 wheel rotations guarantee 100% particle and bacteria removal Complete decontamination in large and unavoidable control zones Does not lose effectiveness even after repeated use Disposable overshoes do not get stuck No transfer of adhesive to critical areas SimStep mats are recyclable Maximum economic efficiency Cost savings due to elimination of purchasing, storage and replacement of conventional peel-off adhesive mats Technical data Mat width: approx. 200 cm (+6.4 cm edge material per side) Length: 100-1000 cm (can be ordered in increments of 100, +6.4 cm edge material per side), but can easily be cut to the desired dimensions Thickness: approx. 2 mm Surface resistance: 108 Ohm Load capacity: approx. 90 kg/cm2 Heat resistance: 0-52°C In addition to the mat, the scope of delivery also includes adhesive and edging material

Our new SimStep Tough permanent adhesive mat is a high-performance decontamination mat with outstanding properties and extreme resilience, also suitable for forklift trucks. Full service - for you right from the start. Consultancy, planning, project management. Our specially trained installation team will support you with your SimStep project right through to professional installation. If you wish, we can also regularly check the performance of the installed SimStep mats directly on your premises. Ask for your personalised offer! Features Colour: Blue Long service life - 5+ years on average No size or area limits Easy to maintain Low profile mat design Fully sealed surface; bordered by black bevelled edge strips No outgassing from polymer - 100% DOP free Safe for all cleanroom environments Antimicrobial technology that prevents the growth of bacteria Low profile yet highly stable mat can withstand heavy trolleys, pallet trucks and even forklift traffic Advantages Reduces the number of particles and germs Environmental savings - replaces disposable adhesive mats, reduces waste and eliminates labour for consumables to be produced and delivered Significantly reduces air pollution Correct placement of the SimStep mat prevents cross-contamination The polymer surface provides a comfortable walking surface 3 steps or 3 wheel rotations guarantee 100% particle and bacteria removal Complete decontamination in large and unavoidable control zones Does not lose effectiveness even after repeated use Disposable overshoes do not get stuck No transfer of adhesive to critical areas SimStep mats are recyclable Maximum economic efficiency Cost savings due to elimination of purchasing, storage and replacement of conventional peel-off adhesive mats Technical data Mat width: approx. 200 cm (+6.4 cm edge material per side) Length: 100-1000 cm (can be ordered in increments of 10, +6.4 cm edge material per side), but can easily be cut to the desired dimensions Thickness: approx. 2.6 mm Surface resistance: 108 Ohm Load capacity: approx. 130 kg/cm2 Heat resistance: 0-52°C In addition to the mat, the scope of delivery also includes adhesive and edging material.