Hand Protection
Our range includes gloves that can be used in cleanrooms. We have taken particular care to select not only product protection gloves, but also gloves that are certified in accordance with PPE (personal protective equipment) guidelines. Our cleanroom gloves can be found in a wide range of industries.
Whether pharmaceutical industry, cytostatics pharmacies, semiconductor industry or optical industry - they all have different requirements. With our selection, we have the right glove for every requirement. Specialities such as heat protection or chemical protection (cytostatics) in cleanrooms were very important to us when making our selection.
Nitrile Cleanroom Glove SimTec® NG030-S PurpleRed
The SimTec® NG030-S PurpleRed nitrile cleanroom glove is a gamma sterilised glove with textured fingers and palm. Specifications Nitrile polymer; accelerator free, powder free Hand specific, rolled edge, texturised palm and fingers Size: 6.0 - 10.0 Colour: Purple Red Thickness Fingertip 0.16 ± 0.02 mm Palm 0.14 ± 0.02 mm Cuff 0.09 ± 0.02 mm Length: 300 ± 10 mm Particles: <3000 per cm² > 0.5 µm Area of application: ISO 5 | GMP A/B Packaging Bag with "easy tear opening" 1 pair per PE bag 20 PE bags per sealed (double) polybag 200 pairs per box
Nitrile Cleanroom Glove SimTec® NG030-S
The SimTec® NG030-S nitrile cleanroom glove is a gamma sterilised glove with textured fingers and palm. Specifications Material: Nitrile polymer; Accelerator free, powder free Design: Hand specific, rolled edge, texturised palm and fingers Size: 6.0 - 10.0 Colour: Neon green Thickness Fingertip 0.16 ± 0.02 mm Palm 0.14 ± 0.02 mm Cuff 0.09 ± 0.02 mm Length: 300 ± 10 mm Particles: <1200 per cm² > 0.5 µm Area of application: ISO 5 | GMP A/B Packaging Bag with "easy tear opening" 1 pair per PE bag 20 PE bags per sealed (double) polybag 200 pairs per box
Nitrile Cleanroom Glove SimTec® NG030 PurpleRed
The Nitrile Cleanroom Glove SimTec® NG030 PurpleRed is a glove with textured fingers and palm. Material & properties Nitrile polymer; accelerator-free, powder-free Hand-specific, rolled edge, textured palm and fingers PurpleRed Length: 300 ± 10 mm Particles: <3000 per cm² > 0.5 µm Thickness Fingertip 0.16 ± 0.02 mm Palm of the hand 0.14 ± 0.02 mm Cuff 0.09 ± 0.02 mm Packaging Bag with "easy tear opening" 1 pair per PE bag 20 PE bags per sealed (double) polybag 200 pairs per box
Cleanroom Glove Biogel®NeoTech - Inner Glove - Sterile
The Biogel PI Tech is a synthetic polychloroprene glove that has been specially developed for the highest safety requirements in critical environments and offers optimum protection, an excellent fit and precise tactile sensitivity. It can be worn individually or with an inner glove and has been tested for chemotherapeutic agents. It remains comfortable and safe even when double gloving. Each glove undergoes rigorous quality control, wash cycles and compressed air testing to ensure the highest standards of protection and performance. Material Material: Synthetic polychloroprene Length: 283-301 mm Width: 71 - 115 mm Thickness Cuff: 0.20 mm Palm: 0.25 mm Finger: 0.27 mm ISO 5 | GMP A Sterile according to ISO 11137, gamma irradiation, SAL 10-6 (dose of ≥ 25 kGy) PPE category III, tested and certified against chemicals - Type B permeation protection AQL* of 0.65 Fully anatomical fit and smooth surface Anti-slip cuffs with rolled edge Properties Virus prenetration: bacteriophage test, ISO 16604 Allergenicity: ISO 10993-10 (part 5 and 10) Pyrogenicity: ASTM D7102 Labelling/ packaging: EN 556-1, EN ISO 15223-1, EN ISO 21420 Endotoxin level < 1500/cm² 4 Total number of liquid particles (≥ 0.5 μm): ≤ 2500/cm² 4 Packaging individually packed in high-quality polyethylene inner packaging 25 pairs per LDPE inner polythene bag for sizes 5.5-8.5; 20 pairs for size 9 2 LDPE inner polybags in one LDPE outer polybag 4 outer polybags per box (200 pairs for sizes 5.5-8.5; 160 pairs for size 9)
Cleanroom Glove Biogel® NeoTech - Sterile
The Biogel PI Tech is a synthetic glove made of polychloroprene that has been specially developed for use in sensitive and critical work areas. It ensures a reliable protective barrier and impresses with its excellent fit, fine tactile sensitivity and high level of comfort. The glove can be used individually or together with an inner glove to further increase user and product protection and is tested and approved for handling chemotherapeutic agents. It remains comfortable and precise even when double gloving. Each glove undergoes rigorous quality control, wash cycles and compressed air testing. Material Material: Synthetic polychloroprene Length: 283-301 mm Width: 71 - 115 mm Thickness Cuff: 0.20 mm Palm: 0.25 mm Finger: 0.27 mm ISO 5 | GMP A Sterile according to ISO 11137, gamma irradiation, SAL 10-6 (dose of ≥ 25 kGy) PPE category III, tested and certified against chemicals - Type B permeation protection AQL* of 0.65 Fully anatomical fit and smooth surface Anti-slip cuffs with rolled edge Properties Virus screening: bacteriophage test, ISO 16604 Allergenicity: ISO 10993-10 (part 5 and 10) Pyrogenicity: ASTM D7102 Labelling/ packaging: EN 556-1, EN ISO 15223-1, EN ISO 21420 Endotoxin level < 1500/cm² 4 Total number of liquid particles (≥ 0.5 μm): ≤ 2500/cm² 4 Packaging individually packed in high-quality polyethylene inner packaging 25 pairs per LDPE inner polythene bag for sizes 5.5-8.5; 20 pairs for size 9 2 LDPE inner polybags in one LDPE outer polybag 4 outer polybags per box (200 pairs for sizes 5.5-8.5; 160 pairs for size 9)
Cleanroom Glove Biogel® Pi Micro Tech - Inner glove - Sterile
The Biogel PI Micro Tech is a synthetic polyisoprene glove for critical environments. It offers a high protective barrier, optimum fit, excellent tactile sensitivity and wearer comfort. The glove can be worn individually or with an inner glove and has been tested for use with chemotherapeutic agents. Biogel gloves remain comfortable and precise even when double-gloved. Each glove is subjected to strict quality controls, washing cycles and compressed air tests. Material Material: Synthetic polyisoprene Length: 283-301 mm Width: 71 - 115 mm Thickness Cuff: 0.20 mm Palm: 0.25 Finger: 0.27 mm ISO 5 | GMP A Sterile according to ISO 11137, gamma irradiation, SAL 10-6 (dose of ≥ 25 kGy) PPE category III, tested and certified against chemicals - Type B permeation protection AQL* of 0.65 Fully anatomical fit and smooth surface Anti-slip cuffs with rolled edge Properties Virus prenetration: bacteriophage test, ISO 16604 Allergenicity: ISO 10993-10 (part 5 and 10) Pyrogenicity: ASTM D7102 Labelling/ packaging: EN 556-1, EN ISO 15223-1, EN ISO 21420 Endotoxin level < 1500/cm² 4 Total number of liquid particles (≥ 0.5 μm): ≤ 2500/cm² 4 Packaging individually packed in high-quality polyethylene inner packaging 25 pairs per LDPE inner polythene bag for sizes 5.5-8.5; 20 pairs for size 9 2 LDPE inner polybags in one LDPE outer polybag 4 outer polybags per box (200 pairs for sizes 5.5-8.5; 160 pairs for size 9)
Cleanroom Glove Biogel® Pi Micro Tech - Sterile
The Biogel PI Micro Tech is a synthetic cleanroom glove made of polyisoprene for critical environments. It offers a high protective barrier, an excellent fit and very good tactile sensitivity and comfort. The glove can be worn individually or in combination with an inner glove and has been tested for handling chemotherapeutic agents. Biogel gloves are manufactured under strict quality controls. Each glove undergoes several wash cycles and a special compressed air test to ensure the highest safety and quality standards. Material Material: Synthetic polyisoprene Length: 283-301 mm Width: 71 - 115 mm Thickness Cuff: 0.20 mm Palm: 0.25 Finger: 0.27 mm ISO 5 | GMP A Sterile according to ISO 11137, gamma irradiation, SAL 10-6 (dose of ≥ 25 kGy) PPE category III, tested and certified against chemicals - Type B permeation protection AQL* of 0.65 Anti-slip cuffs with rolled edge Fully anatomical fit and smooth surface Properties Virus screening: bacteriophage test, ISO 16604 Allergenicity: ISO 10993-10 (part 5 and 10) Pyrogenicity: ASTM D7102 Labelling/ packaging: EN 556-1, EN ISO 15223-1, EN ISO 21420 Endotoxin level < 1500/cm² 4 Total number of liquid particles (≥ 0.5 μm): ≤ 2500/cm² 4 Packaging individually packed in high-quality polyethylene inner packaging 25 pairs per LDPE inner polythene bag for sizes 5.5-8.5; 20 pairs for size 9 2 LDPE inner polybags in one LDPE outer polybag 4 outer polybags per box (200 pairs for sizes 5.5-8.5; 160 pairs for size 9)
Cleanroom Glove Biogel® Pi Tech - Inner Glove - Sterile
The Biogel ® PI Tech is a synthetic polyisoprene glove for critical environments. It offers an excellent protective barrier as well as outstanding properties in terms of fit, tactile sensitivity and comfort. The glove can be worn alone or in combination with an inner glove to increase the protection of the product and the user. The glove has been tested and approved for use with chemotherapeutic agents. Biogel gloves are manufactured in such a way that they are comfortable to wear even when double gloving and retain dexterity and tactile sensitivity. They are manufactured under strict quality controls. Each individual glove is subjected to numerous washing cycles and a specific compressed air test. Material Material: Synthetic polyisoprene Length: 283-301 mm Width: 71 - 115 mm Thickness Cuff: 0.20 mm Palm: 0.25 mm Finger: 0.27 mm ISO 5 | GMP A Sterile according to ISO 11137, gamma irradiation, SAL 10-6 (dose of ≥ 25 kGy) PPE category III, tested and certified against chemicals - Type B permeation protection AQL* of 0.65 Properties Fully anatomical fit and smooth surface Anti-slip cuff with rolled edge Virus prenetration: Bacteriophage test, ISO 16604 Allergenicity: ISO 10993-10 (part 5 and 10) Pyrogenicity: ASTM D7102 Packaging individually packed in high-quality polythene inner packaging 25 pairs per LDPE inner polythene bag for sizes 5.5-8.5; 20 pairs for size 9 2 LDPE inner polybags in one LDPE outer polybag 4 outer polybags per box (200 pairs for sizes 5.5-8.5; 160 pairs for size 9)
Cleanroom Glove Biogel® Pi Tech - Sterile
The Biogel ® PI Tech is a synthetic polyisoprene glove for critical environments. It offers an excellent protective barrier as well as outstanding properties in terms of fit, tactile sensitivity and comfort. The glove can be worn alone or in combination with an inner glove to increase the protection of the product and the user. The glove has been tested and approved for use with chemotherapeutic agents. Biogel gloves are manufactured in such a way that they are comfortable to wear even when double gloving and retain dexterity and tactile sensitivity. They are manufactured under strict quality controls. Each individual glove is subjected to numerous washing cycles and a specific compressed air test. Material Material: Synthetic polyisoprene Length: 283-301 mm Width: 71 - 115 mm Thickness Cuff: 0.20 mm Palm: 0.25 Finger: 0.27 mm ISO 5 | GMP A Sterile according to ISO 11137, gamma irradiation, SAL 10-6 (dose of ≥ 25 kGy) PPE category III, tested and certified against chemicals - Type B permeation protection AQL* of 0.65 Properties Suitable for use in aseptic environments Biogel hydrogel polymer coating Fully anatomical fit and smooth surface Anti-slip cuff with rolled edge Powder-free Packaging individually packed in high-quality polythene inner packaging 25 pairs per LDPE inner polythene bag for sizes 5.5-8.5; 20 pairs for size 9 2 LDPE inner polybags in one LDPE outer polybag 4 outer polybags per box (200 pairs for sizes 5.5-8.5; 160 pairs for size 9)
Heat Protection Glove TG-16
The TG-16 cleanroom heat protection glove is a heat protection glove that can also be used in cleanrooms. It has a heat resistance of up to 280°C. The back of the hand is made of PU and the palm is made of a heat-resistant Twaron fibre. The Twaron fibre is provided with carbon threads to ensure antistatic properties. Specifications Material: Palm: Twaron with carbon fibres with polyurethane coating Back of hand: Silpalon acrylic filament with polyurethane coating and Beltron fibres in 5mm intervals Size: 9/L - 11/XXL Length: approx. 280 mm Disposable/Reusable: Reusable ISO Class: 5 Packaging: Packed in pairs Areas of application: Suitable for cleanrooms Characteristics Hand-specific Can be combined with HK-11 Heat-resistant material up to 280°C, adrylic fibre up to 150°C Antistatic Suitable for cleanrooms
Nitrile Cleanroom Glove SimTec® Sterile NG040-S
Nitrile Cleanroom glove SimTec® NG040-S is a gamma sterilised glove with textured fingers and palm. Material & properties Nitrile polymer; accelerator free, powder free Hand-specific, rolled edge, texturised palm and fingers White Length: 400 ± 10 mm Particles: <1200 per cm² > 0.5 µm Thickness Fingertip 0.18 ± 0.02 mm Palm of the hand 0.15 ± 0.02 mm Cuff 0.09 ± 0.02 mm Packaging Bag with "easy tear opening" 1 pair per PE bag 20 PE bags per sealed (double) polybag 8 poly bags per double-walled box 160 pairs per box
Nitrile Cleanroom Glove Riverstone LE-TACKY
The Riverstone LE-TACKY is a nitrile cleanroom glove with very low residue values. Unlike other nitrile gloves, no sulphur or zinc oxides are added to the glove during manufacture. The very good stretch behaviour exceeds that of the nitrile gloves known to us to date - even that of some neoprene gloves by far. Material & properties Material: 100 % nitrile Colour: White Length: 300 mm Thickness: 0.08 mm +/- 0.02 mm Wearable on both sides ISO 4 Hardly extractable substances Powder-free Latex-free Textured fingertips Rolled edge Very low particle release Very stretchy, supple and non-slip Without plasticisers, contain no phthalate ester, silicone oil and amide Washed with 0.1m high-resistance water with> 17 MegaOhm water and packaged in an ISO 4 cleanroom environment Packaging 100 pieces per bag 10 pouches per carton
HPPE Glove SimCut Lite Fit
The SimCut Lite Fit cut protection glove is an uncoated thin glove that is ideal for use as an underglove. Despite its cut protection, this supple glove offers great freedom of movement and ideal dexterity. Material & properties Material: HPPE 79%, spandex 8%, nylon 12%, polyester 1% Length: 170 - 230 mm Thickness: 1.0 - 1.2 mm Thin glove with cut protection Ideal as an underglove Without coating Elasticated cuff Seamless knitted fabric High-quality HPPE fibre Extremely supple glove with cut protection and abrasion resistance Ideal dexterity Great freedom of movement ISO 7 KAT II Level values according to EN 388:2016 Abrasion resistance: Level 2 Cut resistance: Level 2 Tear resistance: Level 4 Puncture resistance: Level 1 Cut resistance: Level B Packaging 10 pairs in a bag 24 bags in a box (240 pairs)
Nylon Glove SimLite Palm
The nylon/PU glove SimLite PALM is an extremely lightweight knitted assembly glove. It is very thin and therefore fits like a second skin, yet is still robust. The coated palm provides a secure grip. Material & properties Material: nylon Coating palm: Polyurethane Length: approx. 200 - 250 mm depending on size Colour: white Knitted 18 gauge Knitted cuff, individual cuff colour for each size Very thin like a second skin and yet robust Outstanding comfort and perfect fit Suitable for light assembly work Extremely light Packaging 10 pairs per bag 24 bags per box (240 pairs)
Nitrile Cleanroom Glove SimTec® NGB030
The SimTec® NGB030 cleanroom glove is a nitrile glove suitable for medical use. It has textured fingertips and can be worn on both sides. Material & properties Material: 100% nitrile Length: 300 mm Thickness: approx. 0.11 mm Colour: Blue ISO 5 GMP C/D PSA KAT III Hypoallergenic Low in particles Textured fingertips Powder-free Ambidextrous Batch on each pack Double wrapped pouches Chlorinated surface Standards and protection level CE 0197 - Cat. III EN 455: Medical gloves for single use EN 374-2: Level 2= AQL 1.5 EN 374-3: Liquid-tight gloves - tested for NaOH 40%=Level 6 ISO 374-5:2016: Protection against microorganisms Packaging 100 pieces in a bag (50 pairs) 10 bags in a box (500 pairs)
ESD Glove SIMSTAT® Fit
The Simstat Fit ESD glove is a protective glove with a special Belltron fibre. Due to its construction, this "sandwich fibre" is much more stable and durable than the coated polyamide fibre used in conventional ESD gloves. In the event of a fibre breakage of the sandwich fibre, there is a considerably lower risk of a short circuit in a component due to only 2 contact possibilities. Material & properties Material: Nylon/ Incorporated carbon fibre Length Depending on size approx. 210 - 240 mm ISO 7 KAT II Silicone-free Without coating Hand-specific Low-linting Coloured cuff Very high climate comfort high tactile sensitivity Surface resistance: 5x109 Ω Contact resistance: < 1.0 x 108 Ω Power levels: 0 1 3 1 Low lint Ideal protection for electronic components Packaging 10 pairs per bag 24 bags per box (240 pairs) Size: XS-XXXL
Nylon Glove Han-Palm
The Han-Palm, IAB's own brand, is the perfect glove for working with smooth and slippery objects made of seamless, low-lint nylon. The coated palm provides a better grip while the uncoated back of the hand is breathable. Material & Properties Material: Nylon Polyurethane-coated palm Length: approx. 240 mm Colour: white ISO 7 PPE CAT. II Hand-specific High climate comfort and high tactile sensitivity Non-slip Low-linting Abrasion resistant Silicone-free Coloured cuff to differentiate between sizes Packaging 10 pairs per bag 24 bags per box (240 pairs)
Nitrile Cleanroom Glove SimTec® NG033-S
The Nitrile Cleanroom Glove SimTec® Sterile NG033-S is a sterile 330 mm long nitrile disposable glove with textured palm and fingers. Specifications Material: Nitrile polymer; accelerator, sulphur, and powder-free Hand-specific, beaded cuff, textured palm and fingers Size: 6.0 – 10.0 Colour: White Thickness: Fingertip 0.16 ± 0.02 mm Palm 0.14 ± 0.02 mm Cuff 0.09 ± 0.02 mm Length: 330 ± 10 mm Particles: <1200 per cm² > 0.5 µm Area of application: ISO 5 | GMP A/B Packaging Bag with "easy tear opening" 1 pair per PE bag 20 PE bags per sealed (double) polybag 200 pairs per box
ESD Glove MayTop®
The ESD Glove May Top is a breathable ESD nylon glove with copper yarn and very high conductive properties. It has a breathable back of the hand, making it very comfortable to wear. Material & Properties Material: 80% nylon / 20% copper yarn Coated fingertips with polyurethane Thickness of the fingertips: approx. 1.0 mm Length: depending on size approx. 210-243mm Colour: brown/white PPE CAT. II Elasticated cuff Breathable back of the hand Low-linting High wearing comfort Surface resistance: approx. 10³ Ohm EN 388 prEN 61430:2014 Packaging 10 pairs in a bag 24 bags in a box (240 pairs)
Nitrile Cleanroom Glove Riverstone Nitrilstat
The RIVERSTONE Nitrilstat is a latex- and powder-free nitrile glove. It has textured fingertips and can be worn on either hand. Specifications Material: 100% pure Nitrile Size: 7/S - 11/XXL Colour: White Thickness: Palm: 0.12 mm ± 0.02 mm Length: approx. 300 mm ISO class: ISO 4 | GMP C/D Particle Count: (0.5 - 20 micron): <400 counts/cm² Packaging: 100 pieces per bag 10 bags per carton Area of Application: Semiconductor Industry Pharmaceutical Industry Aviation Electronics Health service Characteristics High tactile sensitivity Low particle release Hardly any extractable substances Latex-free; powder-free Ambidextrous Textured fingertips No plasticizers, contains no phthalate esters, no silicone oil, and no amides
Nitrile Cleanroom Glove Riverstone Nitrilstat blue
The Riverstone Nitrilstat Cleanroom Glove in blue is a nitrile glove that can be worn on either hand and has very low particle release. Its textured fingertips give it good grip. Specifications Material: 100% pure Nitrile Size: 6/XS - 11/XXL Color: Natural Blue Thickness: Palm: 0.12 ± 0.02 mm Length: min. 300 mm ISO Class: ISO 4 | GMP C/D Particle Count: <600 particles/cm2 Packaging: 100 pieces per bag 10 bags per box Area of Application: Aviation Electronics Healthcare Pharmaceutical industry Properties Low extractable substances Low particle count Latex free Powder free Textured fingertips Ambidextrious Without plasticizers, contain no phthalates esters, no silicone oil and no amides
ESD Glove SIMSTAT® Top
The SIMSTAT® series is distinguished from conventional ESD gloves by the "sandwich fibre" used. Thanks to the innovative design, this is significantly more stable and durable than the coated polyamide fibre used in conventional ESD gloves. In the event of a fibre break in the sandwich fibre, there is a significantly lower risk of a short circuit in a component due to only 2 contact options. Material & properties PU-coated fingertips Surface resistance: 1x1010 Ω Power levels: 0 1 3 1 Recommendation: ISO 7-9 Nylon-carbon fibre Length: 210-240 mm Very high climate comfort Low-linting Ideal protection for electronic components Silicone-free Size: XS-XXXL
ESD Glove SIMSTAT® Palm
The SimStat®-PALM series is distinguished from conventional ESD gloves by the "sandwich fibre" used. Thanks to the innovative design, this is much more stable and durable than the coated polyamide fibre used in conventional ESD gloves. In the event of a fibre breakage of the sandwich fibre, there is a significantly lower risk of a short circuit in a component due to only 2 contact possibilities. Material & properties Material: nylon / integrated carbon fibre Length approx. 210 - 240 mm depending on size PU-coated palm Colour grey-melange Recommendation: ISO 7 - 9 Silicone-free Hand-specific Low-linting Coloured cuff Very high climate comfort High tactile sensitivity Contact resistance < 1.0 x108 Ω Packaging 10 pairs per bag 24 bags per box (240 pairs)
Nylon Glove SimLite Top
The nylon/PU glove SimLite Top is an extremely lightweight knitted nylon assembly glove. It is very thin and therefore fits like a second skin, yet is still robust. Material & properties Material: nylon / polyurethane Coating: Polyurethane-coated fingertips Length: 200 - 250 mm Colour: white Knitted 18 gauge KAT II Knitted cuff, individual cuff colour for each size Very thin like a second skin and yet robust Outstanding comfort and perfect fit Suitable for light assembly work Extremely lightweight Packaging 10 pairs in one bag 24 bags per box (240 pairs)
ESD Glove MayFit®
The ESD Glove MAY-Fit is a breathable ESD nylon glove with copper yarn and very high conductive properties. Material & Properties Material: 80% nylon / 20% copper yarn Length: depending on size approx. 210-243mm Thickness of fingertips: approx. 1.0mm Colour: Brown/White Breathable back of the hand Uncoated Elasticated cuff Can be worn on both sides Lint-free High wearing comfort ESD PSA CAT. II Surface resistance: approx. 10³ Ω EN 388 EN 61430-5-1&2 Performance levels: 0 1 3 1 prEN 61430:2014 Packaging 10 pairs in a bag 24 bags in a carton (240 pairs)
ESD Glove MayPalm®
The ESD Glove MAY-Palm is a breathable ESD nylon glove with copper yarn and very high conductive properties. Its palm is coated with polyurethane. Material & Properties Material: 80% Nylon / 20% Copper Yarn Material palm: Polyurethane Length: depending on size approx. 210-243mm Thickness of fingertips: approx. 1.0mm Colour: brown/white ESD PSA CAT. II Coated palm Elasticated cuff Breathable back of the hand Lint-free High wearing comfort Surface resistance: approx. 10³ Ω EN 388 EN 61430-5-1&2 Performance levels: 3 1 3 1 prEN 61430:2014 Packaging 10 pairs in a bag 24 pairs in a box (240 pairs)
Nylon Glove Han-Fit
The Han-Fit cleanroom glove is an IAB own brand. It is made of high-quality, seamless nylon, is uncoated and therefore offers a very high level of climate comfort. The glove is therefore also used as an underglove in cleanrooms. The nylon gloves from the Han series are very robust and ideal for general work in clean environments and cleanrooms from ISO 7. Material & properties Material: nylon Length: approx. 240 mm Colour: white ISO 7 KAT II Uncoated can be ideally worn as a glove under disposable rubber gloves Hand-specific High climate comfort and high tactile sensitivity Non-slip Low linting Abrasion resistant Silicone-free Coloured cuff to differentiate between sizes Areas of application: Automotive industry Product protection Precision mechanics Optics Underglove in cleanrooms Packaging 10 pairs in a bag 24 bags per box (240 pairs)
Nylon Glove Han-Top
The Han-Top, IAB's own brand, is the perfect glove for assembling very small parts. The glove is made of high-quality, seamless nylon. The coated fingertips provide a better grip without sacrificing breathability. Material & properties Material: nylon / polyurethane Length approx. 240 mm Colour: white PU-coated fingertips ISO 7 PPE CAT. II Hand-specific High climate comfort and high tactile sensitivity Non-slip Low-linting Abrasion resistant Silicone-free Coloured cuff to differentiate between sizes Packaging 10 pairs per bag 24 bags per box (240 pairs)
Nitrile Cleanroom Glove G3 Sterling
The G3 Sterling cleanroom glove is made from 100% nitrile and is suitable for use in ISO 3 or higher class cleanrooms. The non-sterile gloves offer enhanced protection for both the wearer and the application and are suitable for a wide range of processes and materials, including semiconductors, non-sterile pharmaceuticals and medical devices. Textured fingertips provide improved tactile control and sensitivity, while the non-powdered, static dissipative nitrile design reduces electrostatic effects. Material & properties Material: Nitrile Length: 300 mm ± 5 mm Finger thickness: 0.10 mm Palm thickness: 0.10 mm Cuff thickness: 0.07 mm Colour: grey ISO 3 GMP C/D KAT III ambidextrous textured fingertips Packaged in a cleanroom in accordance with ISO Class 3 cleanroom standards Manufactured in accordance with the ISO 9001 quality assurance system Packaging 250 pieces in a bag 6 bags in a box (1500 pieces)
Nylon Glove SimLite Fit
The SimLite Fit glove is an uncoated 18 gauge nylon knitted glove that is suitable as a light assembly or underglove. Material & Features Material: Nylon Length: approx. 200 - 250 mm depending on size Thickness: approx. 0.08 mm ± 0.02 Colour: White Knitted 18 gauge Knitted cuff, individual cuff colour for each size Very thin like a second skin and yet robust Outstanding comfort and perfect fit Suitable for light assembly work and as an underglove Extremely light Uncoated Packaging 10 pairs per bag 24 bags per box (240 pairs)
Nitrile Cleanroom Glove Riverstone Tacky
The Riverstone Tacky is a 300 mm long, very grippy nitrile cleanroom glove and therefore unbeatable for handling smallest and precision parts. Due to the texturing absolutely sensitive and non-slip, also wearable on both sides. Material & Properties Material: Nitrile Length: 300 mm Thickness > 0,08 mm Color White ISO 5 Powder free Latex free Can be worn on both sides Textured fingertips Very grippy Rolled edge Washed with high quality 0.2 µm filtered deionized water and packed in a certified clean room No plasticizers, no phthalate esters, silicone oil and amides contained Areas of application Medical examinations Pharmaceutical fields Chemical industry Precision mechanics Semiconductor industry Packaging 100 pieces per bag 10 bags per carton (1000 pieces)
Cleanroom Nitrile Glove Isofield NS300
The NS300 cleanroom glove from Isofield is an ambidextrous nitrile glove with a length of 300 mm. Material & Features Material: Nitrile Length: 300 mm ISO 5 Colour: white Thickness fingertip: 0.14 mm Thickness palm: 0.13 mm Cuff thickness: 0.07 mm Can be worn on both sides Textured fingers Beaded cuff Low endotoxin levels AQL < 1.5 - Level 2 of 3 EN374-2:2016 Particles: ≥ 0.5µm (counts/cm²) Packaging 100 pieces in one bag 10 bags in a box (1000 pieces)
Latex Cleanroom Glove SimTec® Sterile LG030-S
The Latex cleanroom glove SimTec® LG030-S Is a gamma sterilised glove with textured fingers and palm. Material & properties Natural rubber latex, powder-free Hand specific, rolled cuff, textured palm and fingers Colour: Natural Length: 300 ± 10 mm Particles: <1200 per cm² > 0,5 µm Thickness Fingertip 0,20 ± 0,02 mm Palm 0,18 ± 0,02 mm Cuff 0,12 ± 0,02 mm Packaging Bag with "easy tear opening" 1 pair per PE bag 20 PE bags per welded (double) polybag 10 poly bags per double-walled carton 200 pairs per carton
Latex Cleanroom Glove SimTec® Sterile LG040-S
The Latex cleanroom glove SimTec® LG040-S is a gamma sterilised glove with textured fingers and palm. Technical Data Material: Latex, powder-free Design: Hand-specific, textured palm and fingers, beaded cuff, chlorinated coating Size: 6.5 – 10 Colour: Natural Thickness: Fingertips: 0.23 ± 0.02 mm Palm: 0.20 ± 0.02 mm Wrist: 0.13 ± 0.02 mm Length: 400 ± 10 mm Particles: < 1200 particles/cm² Area of Application: ISO 5 | GMP Grade A/B Packaging Bag with "easy-tear opening" 1 pair per PE bag 20 PE bags per sealed (double) polybag 8 polybags per double-walled carton 160 pairs per carton
Nitrile Cleanroom Glove SimTec® NGTU30
The Cleanroom Glove SimTec NGTU30 is an ultra thin nitrile glove with textured fingertips. It has a pleasant wearing comfort due to the production from a flexible, chlorine- and powder-free material. Material & Properties Material: Nitrile Length: 300 mm Colour: white Width of palm: 83 mm (+/- 3 mm) Weight (per piece): 4.8 g (+/- 0.3 g) Thickness (single-walled) Cuff: 0.065 mm (+/- 0.02 mm) Palm: 0.095 mm (+/- 0.02 mm) Fingertips: 0.14 mm (+/- 0.02 mm) Ultra-thin Hypoallergenic Free from accelerators Low-particle Textured fingertips Powder-free Ambidextrous Double-packed pouches ISO 5 Protein content (ASTM D 5712): not available Powder content (ASTM D 6124): 2 mg/glove (max) Physical properties (ASTM D 6319) Before ageing Tensile strength: > 14 MPa Elongation capacity: > 500% After ageing Tensile strength: > 14 MPa Elongation capacity: > 400% Number of particles: < 1,200/cm² Non-volatile residues (DI extraction): < 10 µg /cm² Silicone oil presence by FTIR (hexane extraction): Absent Packaging 100 pieces in a bag 10 bags in a carton