Cleanroom wipes are a very important accessory when cleaning cleanrooms. Due to the high demands, it is very difficult to find the right wipes.
Our lineup includes polyester, microfiber and polyester-cellulose products that have been proven in controlled zones, including Bemcot fabrics, as well as presaturated cleanroom wipes. Since the use can be costly, it was important to us to select high quality products at an economical price.
We are happy to assist you in choosing a suitable cleanroom wiptes with our consulting team.
PU:
Tub with 130 wipes
The "Inspec Premium Tub Wipes" are sterile, ready-to-use disinfection wipes. They are pre-soaked with a mixture of 70% v/v alcohol solution in WFI quality water.
InSpec IPA Wipes, an economical solution for wiping applications.
Material & Properties
Wipes material: Polyester 45% /Cellulose 55%
Pre-soaked: 70% v/v alcohol solution in WFI quality water
Length: 200 mm
Width: 170 mm
Thickness: 290 micron
Colour: white
Dry tensile MD (N/50mm) 117,1 N/m
Dry tensile strength CD (N/50mm) 32,4 N/m
Wet tensile MD (N/50mm) 92.6 N/m
Wet tensile CD (N/50mm) 23,1 N/m
Absorption capacity 612.16%.
Absorption time 1,9s
Packaging
130 wipes in a tub
12 tub in one carton
PU:
Bag with 500 pieces
The "Polyester-Swab PS3910" is designed for cleaning small, slotted and recessed areas. Excellent cleaning is controlled and supported with a flexible handle.Made from a two-layer knitted polyester that is free from organic contaminants such as silicone, amides or phthalates.The polyester layers are thermally bonded to the handle, eliminating the use of contaminating adhesives or coatings. The polyester, which is washed and packaged in an ISO Class 5 clean room, has low particle and ion content.It has excellent compatibility with most common solvents, including acetone, and excellent absorbency.
Material & Properties
Head material Double Layer Knitted Polyester
Head weave Thermally bonded
Head width 6.0 mm
Head thickness 3.0 mm
Head length 17.0 mm
Handle material polypropylene
Handle width 3.2 mm
Handle length 145.0 mm
Total swab length 162.0 mm
Free of silicone, amide and DOP
Low non-volatile prospects
Good absorbency
Compatible with most common solvents
No contaminating adhesives or coatings
Applications
Micromechanical cleaning
Remove contaminants from hard disk drives
Cleaning of small, hard-to-reach areas using solvents such as IPA
Remove flux residues and other excess materials
For general cleaning
Packing
500 pieces in a bag
10 bags in a carton (5000 pieces)
PU:
6 bags with 100 wipes each
Available
The sterile "PROSAT Vial Wipes HCPS6044" vial wipe is made of 100% Nowoven polyester pre-saturated with a mixture of 70% IPA and purified water.
It has a low particle release and is therefore ideal for use in cleanrooms.
The small high quality wipes can be used in place of sterile, individually packaged alcohol prep wipes which generate more waste and particles.
The flat peel and re-seal packaging offers both quick access and easy closure and requires minimal space, making it suitable for small cleanrooms such as isolators.
Material & Properties
Material: 100% PolyesterLength: 100 mmWidth: 100 mmBasic weight: 67 g/m2ISO 5GMP A/BPre-saturated with 70% IPA and 30% purified waterReduces VOCsControlled saturation levelEffective and fast drying disinfectionReclosable bag
Packaging
60 wipes in a resealable inner bag.4 inner bags in an outer bag2 outer bags in a sterile outer bag3 outer bags in a box (1440 wipes)
PU:
Bag with 150 pieces
Available
The cleanroom wipe "Vipers P140L" is a double woven polyester wipe with high abrasion resistance.All edges are laser welded to minimise particle and fibre shedding.
Pre-wetting a bag once saves reprocessing costs and ensures pre-moistened wipes are always ready to hand.The low liquid release enables cleaning during operation with little or no risk of accidents.Replacing the cloth after 6m² with a new one prevents contamination carry-over.Can be used on both smooth and perforated floor coverings.
Material & Properties
Material: Polyester
Length: 580 mm
Width: 230 mm
Thickness: 0.48 mm
Colour: white
Basic weight: 140 g/m2
ISO 5
Edge cut: laser welded
Absorption capacity: 320 ml/m2
Uptake speed: ≤ 0,5 sec
Packaging
150 wipes in a bag
6 bags in a carton
PU:
Bag with 50 pieces
The cleanroom wipe "Vipers MF200" has a silk character and is suitable for very sensitive surfaces.It consists of polyester/nylon micro denier continuous filament and impresses with its very low particle emission, residue and ion content.
Material & Properties
Material: Polyester/nylon blended fabric (microfibre).
Length: 230 mm
Width: 230 mm
Colour: white
Thickness 0.43 ± 0.05 mm
Basic weight 197 g/m²
ISO 4
RoHS compliant
Washable and autoclavable
Ideal for applications requiring maximum cleanliness
Superior wiping performance for cleaning delicate components or surfaces
Double packed
Edge cut laser sealed
Absorption capacity ≤ 300 ml/m2
Absorption speed ≤ 3 sec.
Packaging
50 wipes in a bag (double-packed)
20 bags in a case
PU:
Bag with 6x25 wipes
Format:
ca. 30 x 30 cm
Das "Reinraumtuch SterileSorb C2" besteht aus einer wasserstrahlverfestigten Mischung aus 55 % Zellulose und 45 % Polyester. Es ist stark absorptionsfähig und besitzt eine ausgezeichnete Haltbarkeit und gute Reinheit. Das SterileSorb kann sowohl feucht als auch trocken verwendet werden und ist dabei ein starkes und langlebiges Wischtuch, das für die allgemeine Reinigung und zum Aufnehmen von Verschüttungen verwendet werden kann.
Material & Eigenschaften
Material: 55 % Zellulose und 45 % Polyester
Länge: 300 mm
Breite: 300 mm
Basisgewicht: 68 g/m²
ISO 5
GMP A/B
auf einen SAL von 10-6 steril validiert
ausgezeichnet geeignet zum Wischen und Aufsaugen
sowohl im feuchten als auch im trockenen Zustand widerstandsfähig und langlebig
Wischtücher aus wasserstrahlverfestigter Zellulose/Polyester besitzen niedrige Mengen an Partikeln und extrahierbaren Substanzen
kostengünstiges Wischtuch für den allgemeinen Gebrauch
Chargennummern auf dem Innen- und Außenbeutel gewährleisten die Nachverfolgbarkeit
in sterilen, abziehbaren Außenbeuteln und einem längsseitig aufreißbaren Innenbeutel verpackt, damit diese selbst mit Handschuhen problemlos geöffnet werden können
Verpackung
25 Tücher in einem Innenbeutel
6 Innenbeutel in einem Außenbeutel
7 Außenbeutel in einem Karton (1050 Tücher)
PU:
Bag with 100 pieces
The "Cleanroom wiper VIPERS® R35" is a lightweight, thin non-woven wipe with extremely high absorbency for fast liquid absorption.
Material & Properties
Material: 50% Rayon / 50% PET (Polyethylene terephthalate)
Length: 250 mm
Width: 250 mm
Thickness 0.22 +/-10% mm
Basis weight 35 g/m² ± 3 g/m²
Colour white
Steam autoclavable
Quarter folded
Edge cut Laser cut
Absorption capacity 300 ml/m²
Uptake speed < 1.0 sec.
ISO 6
Packaging
100 pieces in a bag
30 bags in a carton (3000 pieces)
PU:
Bag with 20 pieces
The "Swab PS713-TOC" is a cleanroom cleaning stick/swab with rectangular and breakable polyester head to easily place the head into a vial without touching it.
The double-knitted cloth is thermally bonded to the handle, eliminating the use of contaminating adhesives or coatings. This swab is free of silicone, amides and phthalates. The flexible head is lint-free and removes residue / particles without scratching the surface. The material has very good compatibility with various solvents and is excellent for working with acetone.
Range of use:
These low TOC swabs are made of 100% knitted polyester material that is additionally cleaned to make the swabs suitable for use in total organic carbon (TOC) analysis.
Also ideal for use in surface sampling for cleaning validation protocols and for thorough cleaning of hard-to-reach areas or small surfaces.Material & PropertiesSet up for the TOC analysis procedure Ideal for use in surface sampling for cleaning validation protocols TOC content of the swab <50 ppb Head material Double Knitted Polyester Head bond Thermally bonded Head width 12.3 mm Head thickness 3.3 mm Head length 23.0 mm Handle material Polypropylene Handle width 5.8 mm Handle length 100.0 mm Total length 123.0 mm Free of silicone, amide and DOP Low non-volatile residue Low particle and ion content Good absorbency Autoclavable Compatible with most common solvents No contaminating adhesives or coatings Micromechanical cleaning Remove contaminants from hard disk drives Effectively clean small, hard-to-reach areas with solvents such as IPA Remove flux residues and excess materials Particles, easily soluble: particles 0.5 µm <3000 counts/swab Washed and packed in ISO 5 cleanroom Washed with electro-deionized ultrapure waterPackaging20 pieces in one bag250 bags in one carton
PU:
Bag with 300 Pieces
Available
The cleanroom wipe "Vipers PNW68" is a white, hydroentangled, non-woven, spunbonded polyester wipe formed without binders, starches or thermal bonding techniques for a chemically clean surface that is strong, clean and absorbent.
Material & Properties
Material: Polyester Nonwoven
Colour: white
Length: 230 mm
Width: 230 mm
Thickness: 0.45 ± 0.5 mm
Basic weight: 68 ± 4 g/m2
Absorption capacity: > 400 ml/m2
ISO 5
Pliable, highly absorbent and durable
Well suited for IPA and other solvents
Packaged in a class 100 clean room
Non-organic: ideal for applications where microbiological factors are important
Ideal cloth for cleaning surfaces that are susceptible to scratching
Packaging
300 wipes in a bag
8 bags in a box (2400 wipes)
PU:
Bag with 600 pieces
Format:
ca. 10 x 10 cm
The cleanroom wipe "Vipers P140" is an ultra-soft knitted polyester wipe with a high filament count. This makes it softer and more absorbent than conventional polyester wipes.
Material & Properties
Material: Polyester
Dimensions: 10x10 cm, 15x15 cm or 23x23 cm
Basic weight 140 g/m²
Colour white
Thickness 0,38 mm
ISO 5
Edges ultrasonically sealed
Solvent resistant
Extremely low linting and very low particle emission
Absorption capacity 415 ml/m
Uptake speed ≤ 1.0 sec.
PU:
Bag with 100 pieces
The "Cleaning Stick/Swab PS3911" is anAntistatic cleanroom cleaning stick/swab with a rectangular polyester head.
The double knitted cloth is thermally bonded to the handle, eliminating the use of contaminating adhesives or coatings. This swab is free of silicone, amides and phthalates. The flexible head is lint-free and removes residues / particles without scratching the surface. The material has a very good compatibility with various solvents and is excellent for working with acetone.The head is designed for cleaning small, slotted and recessed surfaces, the excellent cleaning is controlled and supported by a flexible paddle.
Material & Features
Head material Double Knitted Polyester
Head weave Thermally bonded
Head width 13 mm
Head thickness 4.0 mm
Head length 25.0 mm
Handle material polypropylene
Handle width 5.2 mm
Handle length 103.0 mm
Total length 128.0 mm
Free of silicone, amide and DOP
Low non-volatile residue
Low particle and ion content
Good absorbency
Compatible with most common solvents
No contaminating adhesives or coatings
Micromechanical cleaning
Remove contaminants from hard disk drives
Effectively clean small, hard-to-reach areas with solvents such as IPA
Remove flux residues and excess materials.
For general cleaning
Particles, easily soluble: particles 0.5 µm <3000 counts/swab
Packaging
100 pieces in a bag
50 bags in a carton
PU:
Bag with 300 pieces
The "Cleanroom Wipe FG C3" is an extremely clean and soft cleanroom wipe made of 100% polyester fabric. The all-purpose wipe has an abrasion-resistant surface and good resistance to solvents and acids.
Material & properties
Material: 100% polyester, hydroentangled
Length: 230 mm
Width: 230 mm
Thickness: 0.279 mm
Basic weight: 68 g/m2
Clean room class ISO 4
Double packed
Very clean and soft
Non-abrasive surface
Good tear resistance
High absorbency
Good resistance to solvents
Low particulate
Nonwoven construction
Particles (>= 0,5 µm) 4 x 106 / m2
Packaging
300 wipes in a bag
8 bags in a carton (2400 wipes)
PU:
300 Pieces
Bluesorb® 750 ist ein Vliestuch aus Zellulose / Polyester, das für Umgebungen der ISO-Klasse 5 und höher empfohlen wird und aus einer wasserverfestigten Vliesmischung aus 55 % Zellulose und 45 % Polyester besteht, die mit einer blauen Farbe versehen ist. Diese Kombination von Eigenschaften verleiht BlueSorb® 750 den Grad an Sauberkeit, Saugfähigkeit, Abriebfestigkeit und chemischer Kompatibilität, der für allgemeine Wisch- und Leckagekontrollanwendungen erforderlich ist. Die blaue Farbe ermöglicht die Unterscheidung in kritischen Bereichen.
Haupteigenschaften
55% Zellulose / 45% Polyester hydroverfestigte Vliesmischung
Blaue Farbe
Keine Bindemittel
Vorteile
Hervorragende Kombination aus synthetischer Polyesterstärke und Sauberkeit mit den absorbierenden Eigenschaften von Zellulose
Die blaue Farbe ermöglicht eine Unterscheidung zur Verhinderung der Migration in kritische Bereiche
Die blaue Farbe bietet eine Hintergrundunterscheidung für die Produktprüfung
Geschmeidig, saugfähig und langlebig
Geringe extrahierbare Mengen und Partikelzahlen
Autoklavierbar
Wirtschaftlich
*Chemisch verträglich mit gängigen Reinigungs- und Desinfektionslösungen *Nicht empfohlen für Anwendungen, bei denen 100% Wasser verwendet wird - das Material ist möglicherweise nicht farbecht
Anwendungen
Entwickelt für den Einsatz in Reinraumumgebungen der ISO-Klasse 5 und höher
Ideal zur Reinigung von Arbeitsflächen und zur Aufnahme von Verschmutzungen
Allgemeine Geräteverpackung und Abwischvorgänge
Blaue Arbeitsplatzmatte zur Unterstützung bei visuellen Inspektionsprozessen
Auftragen und Entfernen von Reinigungs- und Desinfektionslösungen
PU:
5 pieces
Available
The "Cleanroom Sponge Cloth D-2" is excellent for wet wiping and high absorption of liquids. The material structure allows it to clean any shape of workpiece without releasing particles. It is the sponge cloth for places where cleanroom compliance is required. The material is heat resistant up to 60° or moist heat.
The integral structure of the sponge cloth is absolutely lint-free, abrasion-resistant and offers very good absorption of liquids. The micropores support efficient cleaning of surfaces. Ecological because reusable and washable, thus reducing waste.
Excellent for washing hard disks and silicon wafers.
On delivery, the sponge cloths are dry/hard and should be softened with DI water before use to maintain the suppleness of the material.
Material & Properties
Material: Special polyurethane
Length: 230 mm
Width: 230 mm
Height: 2 mm
Pores Ø (µm): 80
Colour: white
High water absorption capacity
Heat resistant up to 60°C
Washable
Abrasion resistant
Lint-free
Micropores on the surface
Packaging
5 pieces in a bag
40 bags in a carton (200 pieces)
PU:
bag with 20 Wipes
Das vorgefeuchtete Reinraumtuch "PROSAT PI PS-314-BPR" von Contec bestehen aus gespaltenen Mikrofaser aus Polyester und Nylon, die die Reinigungswirkung und die Fähigkeit zur Aufnahme von Verunreinigungen verbessert.Das Mikrofasergewebe besitzt ein hohes Absorptionsvermögen und gibt den Alkohol dosiert an die Oberfläche ab. Durch die dosierte Abgabe ist die Oberflächenabdeckung pro Wischtuch größer als bei anderen vorgetränkten Wischtüchern mit vergleichbarem Gewicht.
Material & Eigenschaften
70 % Polyester / 30 % Nylon
Farbe Weiß
Basisgewicht 80 g/m2
In deionisiertem Wasser: 0,034 g/m2
In Isopropanol: 0,017 g/m2
Partikel P > 0.5µm; (x106/m2): 11.20
Fasern > 100µm; (x103/m2): 11.96
Reinraumklasse ISO 5
GMP C/D
Wasserstrahlverfestigte Mikrofaser
Schwere Mikrofaser
in 1 Minute gegen Bakterien und in 3 Minuten gegen Hefepilze wirksam
gemäß der EU- und GB-Verordnung über Biozidprodukte zum Verkauf zugelassen. (Contec IPA wipes : EU 0020460 0002 1-2)
Flacher, wiederverschließbarer Beutel
Einsatzgebiete
Pharmazeutische Industrie
Biotechnologie
Medizintechnik
Verpackung
1 Innenbeutel mit 20 Tüchern
10 Innenbeutel in 1 Außenbeutel
4 Außenbeutel im Karton (800 Tücher)
PU:
Carton with 4 bags à 100 pieces each
The "Cleanroom Wipe FG Purity 7225" is a high-class knitted cleanroom wipe made of pure 100% continuous filament polyester fibre for particularly sensitive areas.Washed in highly filtered water (0.45µ).Dried by HEPA class 10 filtered airflow. Each cloth is checked for cleanliness and hermetically sealed for cleanroom use.
Material & Properties
Material: Polyester
Length: 305 mm
Width: 305 mm
Thickness: 0,432 mm
Basis weight: 136 g/m²
Colour: white
ISO 4
Versatile dry and wet wiping capabilities
Very durable and highly absorbent
Ultra-low particle release, extract content and metallic ions
Packaging
100 wipes in a bag
4 bags in a box (400 wipes)
PU:
Bag with 100 pieces
The "Vipers® MF100" microfibre wipe is ideal for cleaning scratch-sensitive surfaces. It has excellent absorbency and particle absorption as well as high chemical resistance.Its wedge-shaped cross-section acts as a squeegee with excellent contact with the surface to be cleaned, creatingsurface to be cleaned and produces excellent absorbency and particle entrapment.
Material & Properties
Material: Polyester-Nylon blend (Microfibre).
Length: 230 mm
Width: 230 mm
Thickness 0.21 mm
Basic weight 100 g/m²
Edge cut laser sealed
Absorption capacity 218 ml/m²
Uptake speed < 2.0 sec
Colour white
Unique, very fine, lightweight cloth. Especially suitable for the optical field
Very low particle emission, residue as well as low ion content.
High chemical resistance
Excellent absorbency and particle absorption
Ideal for cleaning surfaces sensitive to scratches
Double packed
Packaging
100 wipes in a bag
10 bags in a carton (1000 wipes)
PU:
Bag à 500 pieces
"Cleaning Sticks/ Microfibre Swab PS3900" with single rounded head.
The Mini Swab is made of a single-layer microfibre that is free of organic contaminants such as silicone, amides or phthalate esters. The fabric is thermally bonded to the handle, avoiding the use of contaminating adhesive or coatings.The polyester, which is washed and packaged in an ISO Class 5 clean room, has low particle and ion content. It has excellent compatibility with most common solvents, including acetone, as well as excellent absorbency and solvent absorption capacity.The head is designed for cleaning small, slit and recessed areas. Excellent cleaning is controlled and supported by a flexible paddle.The swabs are designed for general cleaning and are the ideal swabs for cleaning components or parts.
Material & properties
Head material: Single knit microfibre
Head width 2.2 mm
Head thickness 1.2 mm
Head length 10.0 mm
Handle material polypropylene
Handle width 2.2 mm
Handle length 62.0 mm
Total length 72.0 mm
Particles, easily releasable Particles 0.5 µm <3000 counts/swab
Free of silicone, amide and DOP
Low non-volatile residues
Low particle and ion content
Good absorbency
Compatible with most common solvents
No contaminating adhesives or coatings
Micromechanical cleaning
Remove contaminants from drives
Effectively clean small, hard-to-reach areas with solvents such as IPA
Remove flux residues and excess materials
For general cleaning
Packaging
500 pieces in a bag
50 bags in a carton
PU:
Carton with 20x300 pieces
The "Sontara® MicroPure AP" was specially developed for use in cleanrooms class ISO 6 or higher. This all-round wipe combines the absorbency of natural fibres with the purity and strength of a synthetic material. Due to its cellulose content, the nonwoven material has a high absorption capacity for particles and liquids.
Material & properties
Material: 45% polyester / 55% cellulose
Length: 224 mm
Width: 224 mm
Basis weight: 68 g/m²
ISO 6
Moisture absorption: 4.27 ml/g / 290 ml/m²
All-purpose cloth
Non-woven fabric
Low extractable residue
Low ion content
Low particle release
High absorbency
Manufactured without binders, chemicals or adhesives
Advanced packaging design: no slitting or cutting
Tearing of the bag in the clean room required
Packaging
300 wipes in one bag
20 bags in a carton (6000 wipes)
PU:
Bag with 5x10 wipes
Available
Format:
ca. 23 x 23 cm
Das "Reinraumtuch Vipers SP115" ist ein steriles Tuch und vielseitig einsetzbar. Es eignet sich zum Wischen und Reinigen in kritischen Umgebungen.
Material & Eigenschaften
Material: 100% Polyester-Endlosfilament
Farbe: Weiss
Länge: 230 mm
Breite: 230 mm
Stärke: 0,48 mm
Basisgewicht: 115 g/m²
Steril
ISO 5
Kantenschnitt Lasergeschnitten
Für den Universaleinsatz im Reinraum
Ökonomisch
Hohe Saugkraft
Abriebfest bei starker Beanspruchung
Leicht
Roter Indikatorpunkt zur Erkennung der Sterilität, Lot. Nr. auf jedem Etikett und Einzelbeutel, gammabestrahlt und steril gemäß AAMI-Richtlinien
Verpackung
5 x 10 Tücher in einem Beutel
15 Beutel in einem Karton
PU:
Carton with 500 Pieces
Diese sterilen Desinfektionstücher sind einzeln in Aufreißbeuteln verpackt. Sie sind mit einer Lösung aus 70% IPA und Wasser in WFI-Qualität getränkt.
Geringe Rückstände
Schnelle Wirkung
Bakterizid und fungizid
PU:
Tub with 200 pieces
The "Inspec Tub Wipes" are sterile, ready-to-use disinfection wipes. They are pre-soaked with a mixture of 70% v/v alcohol solution in WFI quality water.
InSpec IPA Wipes, an economical solution for wiping applications.
Material & Properties
Wipes material: Polyester 45% /Cellulose 55%
Pre-soaked: 70% v/v alcohol solution in WFI quality water
Length: 200 mm
Width: 200 mm
Thickness: 290 micron
Colour: white
Dry tensile MD (N/50mm) 117,1 N/m
Dry tensile strength CD (N/50mm) 32,4 N/m
Wet tensile MD (N/50mm) 92.6 N/m
Wet tensile CD (N/50mm) 23,1 N/m
Absorption capacity 612.16%.
Absorption time 1,9s
Packaging
200 wipes in a tub
12 tub in one carton
PU:
Bag with 300 pieces
Format:
ca. 23 x 23 cm
The "Cleanroom wipe FG C1" is one of the most popular all-purpose cleanroom wipes. It is highly absorbent (up to 4x its own weight), very soft and wipes without leaving scratches. This low lint cloth can be used wet or dry. Very low particle and ion release. Special hydroentangled cellulose/polyester blend.
Material & Properties
Material: 55% cellulose, 45% polyester
Length: 230 mm
Width: 230 mm
Thickness: 0.305 mm
Basic weight: 68 g/m2
ISO 5
Highly absorbent
Very soft
Can be used wet and dry
Very low particle and ion emission
Nonwoven
Autoclavable
Packaging
300 wipes in a bag
12 bags in a carton
PU:
Box with 1000 pieces
"Cleaning Sticks/Swab Huby-340 CA-006" with semicircular head.
This extremely absorbent swab has many applications in optics, laser and medical technology. The material cotton is by nature very chemical resistant and is well compatible with various solvents.
Material & Properties
Material head: cotton
Material handle: wood
Diameter head: 4.7 mm
Diameter handle: 2.3 mm
Length head: 15 mm
Length of handle: 148 mm
Total length: 150 +- 0,5 mm
half-round head
Packing
100 pieces in a bag
10 bags in a box
20 boxes in a carton
PU:
Bag with 150 pieces
The "Cleanroom Wipe Vipers® P160" convinces with its excellent tear resistance and high absorbency. At the same time, it has a very low particle emission, residue and ion content.
Material & Properties
Material: 100% Polyester continuous filament
Length: 230 mm
Width: 230 mm
Thickness: 0.45 ± 0.05 mm
Basic weight; 135 g/m²
Colour: White
Edge cut: Laser sealed
Absorbency: ≥ 320 ml/m²
ISO 4
Very low particle release, residue as well as low ion content.
Excellent tear resistance
High absorbency
Packaging
150 pieces in a bag
10 bags in a carton (1500 pieces)
PU:
10 pieces
Available
The "Cleanroom Sponge Cloth E-1" is ideal for wet wiping due to its high absorption of liquids. The material structure allows it to clean any shape of workpiece without releasing particles. It is the sponge cloth for places where cleanroom compliance is required. The material is heat resistant up to 60° or moist heat.
The integral structure of the sponge cloth is absolutely lint-free, abrasion-resistant and offers very good absorption of liquids. The micropores support efficient cleaning of surfaces. Ecological because reusable and washable, thus reducing waste.
Excellent for washing hard disks and silicon wafers.
On delivery, the sponge cloths are dry/hard and should be softened with DI water before use to maintain the suppleness of the material.
Material & Properties
Material: Special polyurethane
Length: 230 mm
Width: 230 mm
Thickness: 1 mm
High liquid absorption
Heat resistant up to 60°C
Washable
Abrasion resistant
Lint-free
Micropores on the surface
Packaging
10 pieces in a bag
40 bags in a carton (400 pieces)
PU:
Bag with 100 pieces
The cleanroom wipe "Vipers MF200" has a silk character and is suitable for very sensitive surfaces.It consists of polyester/nylon micro denier continuous filament and impresses with its very low particle emission, residue and ion content.
Material & Properties
Material: Polyester/Nylon blended fabric (Microfibre)
Length: 230 mm
Width: 230 mm
Colour: white
Thickness 0.43 ± 0.05 mm
Basic weight 197 g/m²
ISO 4
RoHS compliant
Washable and autoclavable
Ideal for applications requiring maximum cleanliness
Superior wiping performance for cleaning delicate components or surfaces
Double packed
Edge cut laser sealed
Absorption capacity ≤ 300 ml/m2
Absorption speed ≤ 3 sec.
Packaging
100 wipes in a double packed bag
10 bags in a carton (1000 wipes)
PU:
Bag with 5x20 pieces
Available
Format:
ca. 30 x 30 cm
The "VIPERS® SPC68 Cleanroom Wipe" is an economical sterile all-purpose cleanroom wipe. It is highly absorbent, resistant, soft and wipes without leaving scratches. It can be used wet and dry. Suitable for use with isopropanol and other solvents. Very low particle and ion release, free of silicone oil and amides.
Material & Properties
Material 55% cellulose / 45% polyester
Basis weight 68 g/m²
Colour White
Thickness 0.30 mm
Edge cut Laser cut
Absorption capacity 288 ml/m2
Pick-up speed 0.8 seconds
Sterile
Economical all-purpose wipe for cleaning smooth surfaces
Absorbent, soft and resistant
Nonwoven fleece
Good compatibility with IPA and other solvents
Packaging
5 x 20 wipes in a bag
15 bags in a carton
PU:
500 pieces
Antistatic cleanroom cleaning stick / swab "PU3920" with tapered 100 ppi polyurethane head.
The foam is thermally bonded to the handle, eliminating the use of contaminating adhesives or coatings. This cleaning stick is free of silicone, amides and phthalates. The head is lint-free and removes residues/particles without scratching the surface.
The cleaning stick is washed and packed according to cleanroom class 10 / ISO 4.
Material & properties
Material head: 100 ppi open cell polyurethane foam
Material stem: polypropylene
Physical characteristics
Head thermally bonded to the handle
Head width 3.2mm
Head thickness 3.2mm
Head length 10.0mm
Handle width 2.7mm
Handle length 66.0 mm
Total length 76.0 mm
ISO 4
Particle, easily detachable
Particle 0.5 µm <6000 counts/swab
Packing
500 pieces in a bag
50 bags in a carton
PU:
Carton with 10 Bag à 100 pieces
Available
The Cleanroom Wipe VIPERS® PMC-140 from the new MicroClean line by VIPERS is made of double knitted continuous filament polyester. This special continuous filament is designed to deliver maximum performance.
The heavyweight is ideal for applications in critical areas that require high sorption capacity.
Material & Properties
Material: Polyester
Length: 23 cm
Width: 23 cm
Thickness: 0.48-0.56 mm ± 0.05 mm
Colour: white
Basic weight: 140 g/m²
ISO 4
Double-knitted continuous filament
Laser sealed edges
Absorbency: 280 ml/m²
High absorbency and wiping performance
Fast sorption rate and excellent sorption capacity
Very low content of submicron particles and fibres.
Solvent safe, double packed and vacuum packed
No silicone oil, amide, DOP
Packed in clean room
Packaging
100 wipes in a bag
10 bags in a carton (1000 wipes)
PU:
Bag with 1000 Pieces
Lensx® 90 ist ein umweltfreundliches Tuch, das für Reinraumanwendungen der ISO-Klasse 6 und höher entwickelt wurde. Lensx® 90 ist zu 100% biologisch abbaubar. Es wird aus 70% Viskose und 30% Manilahanf hergestellt. Lensx® 90 wurde für extreme Weichheit entwickelt und wird bei der Reinigung empfindlicher Oberflächen eingesetzt.
Haupteigenschaften
70% Viskose / 30% Manilahanf Vliesstoff
Entwickelt für extreme Weichheit
Erfüllt die behördliche Spezifikation #AA-50177, Typ 1, Klasse 1
Berstfestigkeit (PSI/10 Blatt trocken): 51
Säure (pH-Wert): 5,6
Ascheprozentsatz (Durchschnitt): 0,42
Vorteile
Extreme Weichheit
Nicht abrasiv
Wenig extrahierbare Stoffe
Umweltbewusst
Entspricht den Anforderungen der RoHS 2002/05 und Reach
100% biologisch abbaubar
Anwendungen
Reinigung von optischen und anderen empfindlichen Oberflächen
Absorbierendes, fusselarmes Arbeitsplatzmaterial
Kompatibel mit Reinraumanwendungen der ISO-Klasse 6 und höher
PU:
Bag with 10 Pieces
Gamma Wipe Supersorb® ist ein hochsaugfähiges, ultraschallkantenversiegeltes, reinraumgewaschenes, zweilagiges Tuch, das für Umgebungen der ISO-Klasse 3 und höher empfohlen wird und aus 100% Endlosfilament-Polyester-Gewebe besteht. Jede Verpackung ist gammabestrahlt und steril bis zu einem Sterilisationsniveau von 10^-6. Diese Kombination von Eigenschaften verleiht Gamma Wipe SuperSorb® das höchste Maß an Sauberkeit, Abriebfestigkeit und chemischer Kompatibilität, das für die Reinigung kritischer steriler Verarbeitungsumgebungen erforderlich ist.
Haupteigenschaften
100% Endlosfilament Polyester Strickgewebe
Zweilagige Pinsonic-Konstruktion mit einzigartiger Strickstruktur und Musterung
Ultraschallversiegelte Kante für reduzierte Faserverschmutzung
Gewaschen und verpackt in Berkshires ISO Klasse 4 Reinraum mit Chargennummer auf jeder Verpackung
Gamma-bestrahlt und steril validiert aif ein Sterilisationslevel von 10-6 gemäß AAMI-Richtlinien
Verpackung im Kopfstil mit Prüfung der Paketintegrität
Das Sterilitätszertifikat ist verfügbar und kann unter der Lotnummer 24/7 im Internet heruntergeladen werden. Details: Verfallsdatum, Strahlendosis, Chargeninformationen, erfüllt cGMP-Anforderungen für die Rückverfolgbarkeit
Vorteile
Kritisch niedrige Partikel, Fasern, Ionen und extrahierbare Stoffe
Hoher Saugfähigkeitsgrad in einem Polyestergestrick reduziert den Tucheinsatz
Das pinsonische Design fügt eine Oberflächenstruktur hinzu, die bei der Entfernung hartnäckiger Rückstände hilft
Hohe Abriebfestigkeit
Chemisch kompatibel mit gängigen Reinigungs- und Desinfektionslösungen wie Isopropylalkohol, Phenolen, Bleichmitteln und quartären Ammoniumverbindungen
Besteht den LAL-Test für Endotoxine <20 EU/Gerät
Umweltbewusst
Entspricht den RoHS- und REACH-Anforderungen
Anwendungen
Entwickelt für den Einsatz in sterilen Umgebungen der ISO-Klasse 3 und höher, in denen ein mikrobieller Ausschluss erforderlich ist
Entwickelt für die Reinigung von sterilen Oberflächen und Geräten während der aseptischen Verarbeitung
Hervorragend geeignet zur Reinigung von sterilen laminaren Luftströmungseinheiten, Barriereisolatoren und Bioabdichtungseinheiten
PU:
Bag with 30 Pieces
Das "PROSAT PS-HS9-7030-BPR" wird aus Filament Polyester hergestellt, das mit einem Laser geschnitten wird, um die Fasern an den Kanten des Tuchs zu verbinden.Dies erzeugt eine sehr saubere, nicht-abrasive Kante, die eine volle Nutzung der Oberfläche des Wischtuchs ermöglicht.Das Wischtuch ist chemikalienbeständig und außergewöhnlich arm an Partikeln und extrahierbaren Partikel und extrahierbare Rückstände, was es ideal für allgemeine und kritische Reinigung.Die Vorbehandlung reduziert den den Lösungsmittelverbrauch, reduziert die VOC IPA verbunden sind, und maximiert die Prozesskontrolle und Konsistenz.
Material & Eigenschaften
Material: Polyester
Länge: 230 mm
Breite: 230 mm
Vorgefeuchtet mit: 70% Isopropanol , 30% deonisiertes Wasser
Basisgewicht: 140 g/m2
für Umgebungen der ISO-Klassen 4-8 empfohlen
versiegelte Ränder reduzieren die Partikel- und Faserbildung
abrieb- und chemikalienbeständig
niedrige Menge an Partikeln und extrahierbaren Kontaminierungen
wiederverschließbarer Beutel erhält die Reinheit und den Sättigungsgrad des Lösungsmittels
Verpackung
30 Tücher in einem wiederverschließbarem Innenbeutel
10 Innenbeutel in einem Außenbeutel
3 Außenbeutel in einem Karton (900 Tücher)
PU:
Box with 2500 pieces
"Cleaning Stick/Swab Huby-340 BB-002" made of pressed cotton with double round head.Due to its shape, this extremely absorbent swab is perfect for use in precision areas such as the laser and optics industry.The material construction wool is by nature very chemical resistant and is well compatible with various solvents.
Material & properties
Material head: cotton
Material handle: pressed paper
Diameter head: 2.6 mm
Diameter of handle: 1.5 mm
Length head: 13,5 mm
Length of handle: 48.5 mm
Total length: 7 +- 1 mm
fine double semicircular head
Packaging
25 pieces in a bag
100 bags in a box
20 boxes in a carton
PU:
Bag with 50 pieces
The antistatic "Cleanroom Cleaning Stick/Swab 3923" has a rectangular 100 ppi polyurethane head.
The foam is thermally bonded to the handle, eliminating the use of contaminating adhesives or coatings. This swab is free of silicone, amides and phthalates. The head is lint free and removes residue / particles without scratching the surface.
Material & Properties
Head material: 100 ppi (Z) open pore polyurethane foam
Handle material: polypropylene
Head weave: Thermally bonded
Head width: 16,0mm
Head thickness: 9,2mm
Head length: 25,5mm
Handle width: 6,7mm
Handle length: 104,8mm
Total length: 130,3mm
Free of silicone, amide and DOP
Low non-volatile residue
Low particle and ion content
Excellent solvent absorption capacity
Compatible with most common solvents
No contaminating adhesives or coatings
Packaging
50 pieces in a bag
50 sachets in a carton