PU:
1 pair
Size:
43
Abeba 5310 Clogs aus der rubber-Serie
schwarz
Glattleder, perforiert
verstellbarer, klappbarer Fersenriemen
rutschhemmende Gummilaufsohle nach SRA Rutschhemmung EN ISO 20347
ESD-gerecht nach DIN EN 61340
Sanitized® behandelt (geruchs- und bakterienhemmend)
Die Schuhe fallen schmal aus. Bitte eine Nummer größer bestellen.
Tip
PU:
1 piece
Available
Length:
200 cm
Our new "SimStep Tough Permanent Adhesive Mat" is a high-performance decontamination mat with outstanding properties and extreme resilience, also loadable with forklift trucks.
Properties
Long life - 5+ years on average
No size or area limitation
Easy to maintain
Low mat design
Completely sealed surface; bordered by black bevelled edge strips
No outgassing from the polymer - 100% DOP free.
Safe for all cleanroom environments
Antimicrobial technology that prevents the growth of bacteria.
Low profile yet highly stable mat handles heavy carts, pallet trucks and even forklift traffic
Advantages
Reduces the number of particles and germs
Ecological savings - replaces disposable adhesive mats, reduces waste and eliminates labour for consumables to be produced and delivered
Significantly reduces air pollution
Proper placement of SimStep mat prevents cross-contamination
The polymer surface provides a pleasant walking comfort
3 treads or 3 wheel rotations guarantee 100% particle and bacteria removal
Complete decontamination in large and inescapable control zones.
Does not lose effectiveness even after being stepped on several times
Disposable overshoes do not get stuck
No transfer of adhesive to the critical areas
SimStep mats are recyclable
Maximum economic efficiency
Cost savings due to elimination of purchasing, storage and replacement of conventional peel-off adhesive mats
Technical data
Mat width: approx. 120 cm (+6.4 cm edge material per side)
Length: 100-1000 cm (can be ordered in increments of 10, +6.4 cm edge material per side), but can easily be cut to desired dimensions
Thickness: approx. 4 mm
Surface resistance: 108 Ohm
Load capacity: approx. 130 kg/cm2
Heat resistance: 0-52°C
In addition to the mat, the scope of delivery also includes bonding and edging material.
PU:
1 piece
Format:
DIN A4
|
Variant:
Squared
The "Cleanroom Collegeblock" is a spiral-bound cleanroom ring binder with anti-static properties to prevent static electricity. It is compatible with most inks without smearing.It is cleaned and packaged in a controlled Class 100 (ISO 5) cleanroom environment.
Material & Properties
Material: Paper
Size: DIN A4
Colour: white
Pattern: squared
Basic weight: 80g/m²
Surface resistivity 4.9 x 1010 Ohm / sq
Cover made of high-density polypropylene material with antistatic properties.
Precision cut with rounded corners to prevent damage to gloves from sharp edges
Material with excellent chemical resistance
Compatible with most inks without smearing
Low ionic contamination
Squared or lined
50 sheets
ISO 5
Packaging
Block of 50 sheets
10 blocks in one box
PU:
Bag with 50 wipes
Available
This sterile non-woven wipe "Vipers SNPW68" is a white, hydroentangled, non-woven, spunbonded polyester wipe formed without binders, starch or thermal bonding techniques for a chemically pure surface that is strong, clean and absorbent.
Material & Properties
Material: Polyester Nonwoven
Colour: white
Length: 340 mm
Width: 360 mm
Thickness: 0.45 ± 0.5 mm
Basis weight: 68 ± 4 g/m2
Edges laser cut
Absorbency: > 400 ml/m2
ISO 5
GMP A/B
Pliable, highly absorbent and durable
Works well with IPA and other solvents
Packaged in a class 100 clean room
Non-organic: ideal for applications where microbiological factors are important
Ideal cloth for cleaning surfaces that are susceptible to scratching
Packaging
50 wipes in a bag
20 bags in a box (1000 wipes)
PU:
1 piece
The "Cleanroom Sponge Cloth D-3" is excellent for wet wiping and high absorption of liquids. The material structure allows it to clean any shape of workpiece without releasing particles. It is the sponge cloth for places where cleanroom compliance is required. The material is heat resistant up to 60° or moist heat.
The integral structure of the sponge cloth is absolutely lint-free, abrasion-resistant and offers very good absorption of liquids. The micropores support efficient cleaning of surfaces. Ecological because reusable and washable, thus reducing waste.
Excellent for washing hard disks and silicon wafers.
On delivery, the sponge is already pre-moistened and ready for immediate use.
Material & Properties
Material: Special polyurethane
Length: 125 mm
Width: 85 mm
Height: 35 mm
Pores Ø (µm): 80
Colour: white
Pre-moistened with a water solution of sodium dehydroacetate.
High water absorption capacity
Heat resistant up to 60°C
Washable
Abrasion resistant
Lint-free
Micropores on the surface
Packaging
1 piece in a bag
75 bags in a carton (75 pieces)
PU:
Bag with 150 pieces
The " Cleanroom wipe Vipers® P115" is a light polyester wipe and versatile. It is suitable for wiping and cleaning in critical environments.
Material & Properties
Material: 100% Polyester continuous filament
Colour: White
Length: 230 mm
Width: 230 mm
Thickness: 0,53 mm
Basic weight: 115 g/m²
ISO 5
Edge cut Laser cut
For universal use in cleanrooms
Economical
High suction power
Abrasion-resistant under heavy use
Lightweight
Red indicator dot to identify sterility, Lot. No. on each label and individual pouch, gamma-irradiated and sterile according to AAMI guidelines
Packaging
150 wipes in a bag
10 bags in a carton
PU:
1 Piece
Available
Technische Eigenschaften
Sterilisierbar im Autoklav mit Dampf
Wiederverwendbar. Bis zu 40 Sterilisationszyklen mit Dampf im Autoklav bei 121°C, 1 atm für 30 Min. möglich
Rahmen aus besonderem Material, das einer Vielzahl von Sterilisationszyklen stand hält
Alle Komponenten aus antiallergischem Material
Sehkorrektureinsatz für Verschreibungslinsen auf Anfrage erhältlich
Neues elastisches Kopfband aus antistatischem Material mit QS-System für schnelle und einfache Regulierung
Eigenschaften Rahmen
Belüftung: indirekt
Schutz gegen Tropfen und Spritzer
Sichtfeld: 220°
Gesamtgewicht in g: 128
Elastisches Kopfband: antistatisches Silikon h 30mm
Qualität:
Bezugsnorm: EN166 EN170
Rahmen: U EN166 3 4 BT 2C-1.2 CE
Scheibe: 2C-1.2 U 1 BT CE
Korrektionseinsatz
Artikelnr. 601.OP.00.99
EIGENSCHAFTEN SICHTSCHEIBEN
Scheibenmaterial: Polycarbonat
Scheibenfarbe: transparent
Beschichtungen-
Stärkein mm: 2.25
Basiskurve5,0 kugelförmig
OptischeKlasse: 1
VLT: 85,8 %
UV-Schutz: 380 nm
Ersatzscheibe
PU:
1 pair
Size:
37
Abeba 5300 Clogs aus der rubber-Serie.
Glattleder weiß, perforiert
verstellbarer, klappbarer Fersenriemen
rutschhemmende Gummilaufsohle nach SRA Rutschhemmung EN ISO 20347
ESD-gerecht nach DIN EN 61340
Sanitized® behandelt (geruchs- und bakterienhemmend)
Die Schuhe fallen schmal aus. Im Zweifelsfall bitte eine Nummer größer bestellen.
PU:
1 Piece
Available
Dispenser box for gloves with hinged lid with a removal opening on the front.There are holes on the back for wall mounting.
Material & Properties
Material: Sheet metal parts 1.4301
Length: 310 mm
Width: 160 mm
Height: 160 mm
Width of withdrawal opening: 50 mm
Height of withdrawal opening: 126 mm
Surface of plates: outside KEK finish, inside blank (rolled)
Filling via hinged lid
Removal opening on front side
Holes at the rear for wall mounting (without fixing material)
Corners welded
Lid lying inside
Hinged flap Removable
Packaging
1 Piece
PU:
1 piece
Available
Size:
S/M
Die Mehrweg-Halbmaske Elipse P3 RD "SPR299 und SPR501" sind Atemschutzmasken mit einem Partikelfilter Stufe 3 (P3). Diese Atemschutzmaske kann überall dort eingesetzt werden, wo eine Staubentwicklung entstehen kann z.B. bei der Verarbeitung von Pulver. Diese Maske ist die Alternative zu Einwegmasken (Feinstaubmasken), siehe Anhang. Die P3 Filter können ausgetauscht werden. Die Lebensdauer der Filter beträgt, je nach Gebrauch, 1-4 Wochen. Interessant ist auch, dass diese Maske inklusive Filter außerdem bis zu 10 mal autoklavierbar ist bei 121°C.
Elipse® passt sich perfekt dem Gesicht an, ohne Behinderung des Benutzers. Das kompakte Profil von Maske und Filter erlaubt allen ELIPSE® Masken eine perfekte Abdichtung des Gesichtsbereiches, bei gleichzeitiger größtmöglicher Gesichtsfeldfreiheit und ohne das Tragen von Ohr-oder Augenschutz zu beeinträchtigen.Große Rückschlag Auslassventil. HESPA® + Filter, Ultra flaches Profil, Tiefe des sichtbaren Filters 5mm. Elastisches und justierbares Kopf- und Nackenband für sicheren und stabilen Halt.
Dank der flexiblen und weichen Eigenschaft des TPE (Thermo Plastic Elastomer), welches in den ELIPSE® Masken verwendet wird, ergibt sich ein hoher Tragekomfort auch bei längerem Einsatz. Die plissierten, austauschbaren Filter haben eine Effektivitat bezogen auf 0,3µm Partikel von Minimum 99,97% oder höher.
Material & Eigenschaften
Maske: Medizinische Qualität TPE Entspricht ISO 10993-10: 2010 für Irritationen
Maskenkörper latex- und silikonfrei, geruchlos
Ventilkörper aus Nylon, Inhalations-/Entlüftungsmembran aus Silikon
4-Punkt verstellbarer elastischer Kopf- und Nackengurt mit Komfortpolster aus TPE
Filter: Mechanische mehrschichtige HESPA Synthetische Medien mit TPE flexibel umspritzt / verkapselt
bis zu 10 Mal autoklavierbar inkl. P3 Filter
100% der Filter NaCl geprüft
5 Jahre (Maske & Filter) Siehe Lagerbedingungen in der Gebrauchsanweisung
Die Filter sind wiederverwendbar und austauschbar.
ZERTIFIKATE
EN140: 1998 Maskenkörper
EN143: 2000+A1: 2006 P3 RD
CE 0194
Verpackung
1 Stück einzeln verpackt
10 Stück in einem Karton
Tip
PU:
1 piece
Available
Length:
100 cm
Our new "SimStep Tough Permanent Adhesive Mat" is a high-performance decontamination mat with outstanding properties and extreme resilience, also loadable with forklift trucks.
Properties
Long life - 5+ years on average
No size or area limitation
Easy to maintain
Low mat design
Completely sealed surface; bordered by black bevelled edge strips
No outgassing from the polymer - 100% DOP free
Safe for all cleanroom environments
Antimicrobial technology that prevents the growth of bacteria.
Low profile yet highly stable mat handles heavy carts, pallet trucks and even forklift traffic
Advantages
Reduces the number of particles and germs
Ecological savings - replaces disposable adhesive mats, reduces waste and eliminates labour for consumables to be produced and delivered
Significantly reduces air pollution
Proper placement of SimStep mat prevents cross-contamination
The polymer surface provides a pleasant walking comfort
3 treads or 3 wheel rotations guarantee 100% particle and bacteria removal
Complete decontamination in large and inescapable control zones.
Does not lose effectiveness even after being stepped on several times
Disposable overshoes do not get stuck
No transfer of adhesive to the critical areas
SimStep mats are recyclable
Maximum economic efficiency
Cost savings due to elimination of purchasing, storage and replacement of conventional peel-off adhesive mats
Technical data
Mat width: approx. 200 cm (+6.4 cm edge material per side)
Length: 100-1000 cm (can be ordered in increments of 10, +6.4 cm edge material per side), but can easily be cut to desired dimensions
Thickness: approx. 4 mm
Surface resistance: 108 Ohm
Load capacity: approx. 130 kg/cm2
Heat resistance: 0-52°C
In addition to the mat, the scope of delivery also includes bonding and edging material.
PU:
Roll with 400 wipes
Variant:
Rolle
DuPont's Sontara EC® Cleaning Cloths are low-lint, general purpose, polyester cellulose (non-woven) cloths with exceptional absorbency and strength that are excellent for many cleaning and preparation tasks in electronics industry environments, maintenance and repair, and any application where a solvent is used. These include aviation, manufacturing, painting, automotive and machine repair, printing, graphic arts and many more.
Whether dry, damp or wet, Sontara EC® wipes are more versatile than cloth rags, stronger and more durable than paper, and less expensive to use than either. They are manufactured under strict controlled production conditions to ensure consistent quality, size and packaging.
Material & Properties
Material: 52% cellulose / 48% polyester
Length: 305 mm
Width: 380 mm
Colour: white
Resistant and durable both dry and wet
Recognised safety for direct contact with foodstuffs
Easy to wash
Inexpensive enough to be used as a disposable wipe
Absorbent - absorbs up to 4 times its own weight in water
Can be used dry
Absorbs oil and solvents
Low linting
No additives that contaminate the surface
Soft enough for polishing and finishing (refining)
Resistant to MEK (methyl ethyl ketone = butanone, a solvent often used in industry), isopropyl alcohol (IPA) and other solvents or cleaning agents
Economical
Packaging
400 pieces to tear off on a roll
PU:
1 Piece
Available
These goggles are designed for use in rooms with controlled contamination such as sterile and clean rooms.Among other uses, it is also used in aseptic conditions, including but not limited to the chemical, pharmaceutical, electronic industries or hospital laboratories. These goggles are designed to withstand multiple sterilisation in an autoclave without any noticeable changes. The careful design allows for long service life and maximum transpiration, offering a wide field of vision and use over all prescription eyewear.
Material & Properties
Material: Polycarbonate / Silicone
Lens thickness: 1.8 mm
Nose piece width: 50 mm
Nose piece height: 20 mm
Total width: 175 mm
Total height: 85 mm
Headband thickness: 2 mm
Headband width: 11.8 mm
Colour: blue / transparent
Sterilisable in autoclave under steam. Lens, frame and band are resistant to 40 cycles autoclave (121'C, 110kPa, 20min).
The lens is replaceable. The frame is made of thermoplastic rubber which remains stable even during multiple sterilisations
11.8 mm wide silicone strap with 2 mm thick adjustable strap length with a polycarbonate snap clip.
Wide panoramic field of vision made of impact-resistant polycarbonate, high-quality anti-fog lens
Indirect ventilation on the top of the goggles to protect against chemical splashes
Compatible or fits on most prescription glasses
Packaging
1 piece
PU:
1 piece
Available
Length:
200 cm
Our "SimStep" permanent adhesive mat is a high-performance decontamination mat with outstanding properties.
Properties
Long life - 5+ years on average
No size or area limitation
Easy to maintain
Low mat design
Completely sealed surface; bordered by black bevelled edge strips
No outgassing from the polymer - 100% DOP free
Safe for all cleanroom environments
Antimicrobial technology that prevents the growth of bacteria
Low profile yet highly stable mat handles heavy carts and lift trucks
Advantages
Reduces the number of particles and germs
Ecological savings - replaces disposable adhesive mats, reduces waste and eliminates labour for consumables to be produced and delivered
Significantly reduces air pollution
Proper placement of SimStep mat prevents cross-contamination
The polymer surface provides a pleasant walking comfort
3 treads or 3 wheel rotations guarantee 100% particle and bacteria removal
Complete decontamination in large and inescapable control zones.
Does not lose effectiveness even after being stepped on several times
Disposable overshoes do not get stuck
No transfer of adhesive to the critical areas
SimStep mats are recyclable
Maximum economic efficiency
Cost savings due to elimination of purchasing, stocking and replacement of conventional peel-off adhesive mats
Technical data
Mat width: approx. 120 cm (+6.4 cm edge material per side)
Length: 100-1000 cm (can be ordered in increments of 100, +6.4 cm border material per side), but can easily be cut to desired dimensions
Thickness: approx. 2 mm
Surface resistance: 108 Ohm
Load capacity: approx. 90 kg/cm2
Heat resistance: 0-52°C
In addition to the mat, the scope of delivery also includes bonding and edging material
PU:
Bag with 5 pieces
Die sterilen Quiltec I Polyester-Moppbezüge wurden speziell für den Einsatz mit Contecs Mopp-Befeuchtungssystem 2787 entwickelt. Mit hoher Saugfähigkeit sind die Mopps für die Einmal-Vorbefeuchtung geeignet - ergeben eine Oberflächenabdeckung von bis zu ungefähr 20 qm². Das Moppbezug-System wurde für die berührungslose Anbringung am Mopphalter entwickelt.
Die Moppbezüge sind mit dem Quicktask Mopphalter 2749 kompatibel.
Der sterile"Einweg Moppbezug Quiltec I #MHQT0150" wird aus 100% 2-lagigem Polyester um einen Viskosekern gefertigt und sind daher ideal für die höchste Reinraumqualität, da sie sehr geringe Mengen an Partikeln und Fasern erzeugen.
Material & Eigenschaften
Material: Polyester / synthetischer Füllwatte-Kern
Länge: 390 mm
Breite: 130 mm
Farbe: weiß
Gewicht: 57 g
ISO 5
GMP A/B
steril
Aufnahmefähigkeit in Wasser: 345 ml
Verpackung
5 Stück in einem doppeltem Beutel
8 Beutel in einem Karton (40 Stück)
PU:
500 pieces
Antistatic cleanroom "cleaning stick/swab PU3921" with paddle-like 100 ppi polyurethane head.
The foam is thermally bonded to the handle, eliminating the use of contaminating adhesives or coatings. This swab is free of silicone, amides and phthalates. The flexible head is lint-free and removes residue without scratching the surface.
Washed and packed according to cleanroom class 10 / ISO 4.
Material & properties
Head material: 100 ppi open cell polyurethane foam
Head width: 6.2 mm
Head thickness : 5.1 mm
Head length: 19 mm
Head colour: white
Handle material: polypropylene
Handle width: 3.2 mm
Handle length: 73 mm
Handle colour: light green
Head thermally welded to the handle
Total length: 92 mm
Can be used with acetone, IPA and other solutions
Free from silicone, amides and phthalates
Particles 0.5 um <3000 counts/swab
Free from silicone, amide and DOP
Low non-volatile residue
Low particle and ion content
Excellent solvent absorption capacity
Compatible with most common solvents
No contaminating adhesives or coatings
Packaging
500 pieces in a bag
20 bags in a carton
PU:
1 pair
Available
Size:
37
S1-Sicherheitsschuhe mit hervorragender Passform und Preis-Leistungs-Verhältnis.
Größe 36-52
CE, EN ISO 20345:2011, S1, SRC
Velours mit atmungsaktivem Textil, schwarz
Atmungsaktives Innenfutter mit Silver Point
Ristbereich verstellbar
Klettverschluss
Dämpfungsaktive PU-Zwischensohle
Rutschhemmende PU-Laufsohle
Stahlkappe
Auswechselbare acc Wave Einlegesohle (Art. 3580)
Sanitized behandelt
ESD-gerecht nach DIN EN 61340
Reflektorstreifen
Sohlenerhöhung möglich
PU:
Box of 100 pieces
Available
This special applicator is made of 100ppi high quality polyurethane foam.It is securely bonded to a hollow polystyrene handle that breaks when bent at 90° angles.
Material & Properties
Material Head: Polyurethane Foam
Material Handle: Plystyrene
Length Head: 16,002 mm
Diameter Head: 4,775 mm
Length of Handle: 149,225 mm
Diameter Handle: 2,54 mm
Medical quality
Foam has excellent collecting and separating properties
Soft foam tip for patient comfort
Can be used dry or with media
Applications
Cheek swab
For nasal and anterior nostrils Specimen collection for diagnostic testing
For general specimen collection for tests
Used in paediatrics, opthamology, veterinary medicine and oropharyngeal applications
Part of rapid diagnostic kits
Packaging
1 piece wrapped in paper
10 pieces in a paper bag
10 paper bags in a carton (100 pieces)
PU:
1 piece
Size:
S/M
Halbmaske mit auswechselbaren Filtern für mehrere Gase, Dämpfe und Staub.
Normen
EN140:1998 Maskenkörper
EN14387:2004 + A1:2008 ABEK1P3 R D
CE 0194
Haltbarkeitsdauer
3 Jahre (Maske und Filter)
Filter sind wiederbenutzbar und austauschbar
Material
Maske: Medizinisches TPE entspricht der ISO 10993-10:2010 für Hautreizungen
Maskenkörper latex- und silikonfrei, geruchsfrei
Ventilkörper aus Nylon, Inhalations-/Exhalationsmembran aus Silikon
4-Punkt verstellbares, elastisches Kopf- und Nackenband mit Komfortpolster aus TPE
Gasfilter: In ein ABS-Gehäuse eingeschlossene Aktivkohle
Partikelfilter: Mechanisches synthetisches Mehrschicht-HESPA-Medium mit TPE flexibel umspritzt/verkapselt. Partikelfilter sind in das Kohlenstoffelement integriert.
PU:
1 piece
Variant:
500 ml Sprühflasche
The "InSpec DE" is a sterile ready-to-use disinfectant consisting of a 70% alcohol solution (denatured ethanol) and 30% ultrapure water WFI-Quality (USP), developed for biopharmaceutical and medical device cleanrooms. The preparation can be used for wiping equipment, hard surfaces (floors, walls and ceilings) and spraying gloved hands. It is manufactured to GMP standards in an ISO 6 cleanroom. The product is filled and capped under an ISO class 5 laminar flow. The solution is filtered through a 0.2 µm filter and gamma irradiated at 25 kGy after a vaildated process to provide a guaranteed sterility level SAL of 10-6.
Material & Properties
Solution: 70% denatured ethanol and 30% ultrapure water
Double packed
Low residue
Fast action
Bactericidal and fungicidal (fungicidal)
Irradiation indicator
Manufactured according to GMP
Complies with EN 1276 (bacteria), EN 1650 (yeast and mould) and EN 13697 (surface test for bacteria, yeast and mould)
Packaging
Bottle with 500 ml
8 bottles in a carton
PU:
Bag with 5 pieces
Der "Einweg Mopp Bezug EFB40" mit seinem innovativen Besatzmaterial wurde für höchste Performance bei der Reinraum-Reinigung ausgelegt. Die speziellen Polyester-Bürststreifen lösen bei der wischenden Reinigung selbst hartnäckige Verunreinigungenund Rückstände, welche anschließend im Mikrofaserbesatz sicher aufgenommen werden.
Empfohlen für die Reinigung und Desinfektion nicht steriler Reinraumbereiche.
Material & Eigenschaften
Material Front: 70 % Polyester-Mikrofaser, 30 % Polyester Bürststreifen
Material Deckblatt: 100 % Polyester-Vlies (verfestigt)
Länge: 400 mm ± 5 mm
Breite: 125 mm ± 5 mm
Farbe: weiß mit grüner Einfassung
ISO 5
GMP C-D
Reinraum-Mopp mit Taschen, 40 cm System
Höchste Performance durch mehrfache Streifen von Mikrofaser + Bürste
Hohe Flächenleistung durch mehrlagigen Flüssigkeitsspeicher
Optimal zur Entfernung von (Desinfektionmittel-) Rückständen
Gleitet optimal auf allen Bodenbelägen
Verpackung
5 Bezüge doppelt verpackt in einem Beutel
20 Beutel in einem Karton (100 Bezüge)
PU:
Carton with 90 pairs
Available
The "BioClean S-BDSC-L" sleeve cover is made of an antistatic, lightweight, low-lint CleanTough material.Rubber cuffs at both ends ensure a secure fit.
Material & Properties
Material: Polyethylene/polypropylene laminate fleece
Length: 500 mm
Colour: white
ISO 4
GMP A
Sterile
Cat III
Excellent ESD properties
Lightweight and low linting
Excellent ESD properties
Packaging
1 pair/sealed PE inner bag
15 inner bags per sealed PE outer bag
6 outer bags (90 pieces) per carton
PU:
6 bags with 100 wipes each
Available
The sterile "PROSAT Vial Wipes HCPS6044" vial wipe is made of 100% Nowoven polyester pre-saturated with a mixture of 70% IPA and purified water.
It has a low particle release and is therefore ideal for use in cleanrooms.
The small high quality wipes can be used in place of sterile, individually packaged alcohol prep wipes which generate more waste and particles.
The flat peel and re-seal packaging offers both quick access and easy closure and requires minimal space, making it suitable for small cleanrooms such as isolators.
Material & Properties
Material: 100% PolyesterLength: 100 mmWidth: 100 mmBasic weight: 67 g/m2ISO 5GMP A/BPre-saturated with 70% IPA and 30% purified waterReduces VOCsControlled saturation levelEffective and fast drying disinfectionReclosable bag
Packaging
60 wipes in a resealable inner bag.4 inner bags in an outer bag2 outer bags in a sterile outer bag3 outer bags in a box (1440 wipes)
PU:
1 Pair
Available
Size:
35
Super leichter und komfortabler Clog aus atmungsaktivem und strapazierfähigem Permair® Leder. Besonders rutschhemmende und stoßabsorbierende Laufsohle. Der Aufbau der Sohle sorgt für Stabilität und mindert das Risiko von Verletzungen durch Umknicken des Fußes. Mit auswechselbarer Einlegesohle aus atmungsaktivem, schweißtransportierendem Material und antibakterieller Eigenschaft. - waschbar bei 30 °C. Futter aus schweißabsorbierendem, atmungsaktivem, strapazierfähigem und schnell trocknendem Politex. ESD-zugelassen.
PU:
Bag with 75 pieces
Das "Reinraumtuch Amplitute EcoCloth" ist ein Wischtuch aus 53% Polyester und 47% Zellulosegewebezeichnet sich durch eine verbesserte Saugfähigkeit und Haltbarkeit aus. Die Saugfähigkeit übersteigt vergleichbare Zellulose-/ Polyester-Tücher. Enthält wenig Partikel und extrahierbare Stoffe und zeichnet sich durch eine hohe Lösemittelverträglichkeit aus.Ideal zum Abwischen von Produkten vor der Einführung in den Reinraum.
Material & Eigenschaften
Material: 53% Zellulose 47% Polyester
Länge: 460 mm
Breite: 460 mm
Farbe: weiß
ISO 6
GMP C/D
Geringer Anteil an Partikeln und Fasern
Ausgezeichnetes Adsorptionsvermögen
Gute Lösemittelverträglichkeit
Verpackung
75 Tücher in einem Beutel
10 Beutel in einem Karton
PU:
Box with 50 pieces
The disposable cleanroom mouthguard "Kimtech Pure M3 #62465" (previously CR Classic) from Kimberly Clark stands for clean and comfortable mouth protection in the cleanroom. It has ear loops and a flexible nose clip for a perfect fit.
Material & Properties
Material: 50% polyethylene / 50% polyester
Length: 180 mm
Width: 90 mm
Colour: white
3-ply
ISO 5
GMP C/D
Packaging
50 pieces in a bag (double packed)
10 bags in a carton
PU:
1 Piece
Plug:
EU
The "Cleanroom Vacuum Cleaner CR-1 ULPA" from Tiger-Vac has a plastic tank and is equipped with a ULPA filter (U15) downstream of the motor. It has a 3-stage filtration system consisting of a ULPA filter (U15), a main cloth filter and a disposable filter bag. The CR-1 ULPA dry hoover is cleanroom compatible and can be used for general cleaning in controlled environments.This vacuum is for dry use only!
Material & Properties
Weight: 9 kg
Container capacity: 15.1 litres
Filter bag capacity: 7.6 litres
Power: 1000 Watt
Voltage: 230 V
Current: 4,3 A
Air flow: 163 m³/h
Length: 410 mm
Width: 410 mm
Height: 560 mm
ISO 4
Can be used in the pharmaceutical industry
3-stage filtration system with ULPA filter U15, main cloth filter and disposable filter bag.
Single-phase flow motor
Low noise level: only 60 dB(A) at 2 metres distance.
For dry application only
Mounted on 4 castors for maximum manoeuvrability
Complete set of accessories included
Packaging
1 vacuum cleaner in a transport-secured box
PU:
1 piece
Available
kombinierter 10 mm Druckknopf mit Bananensteckerbuchse, stapelbar
1 MOhm Sicherheitswiderstand
Farbe: Schwarz
Länge: 3,0 m
PU:
Bag with 400 pieces
Format:
ca. 10 x 10 cm
The "FG Compo Wipe 7408" is a cleanroom wipe made of multiple layers. This multilayer composite of different components is built up in three layers - polypropylene and cellulose. These have been thermally bonded. This results in a synergy of both materials. The outer polypropylene layer transfers the moisture to the inner cellulose core. This absorbs the liquid excellently and stores it. The polypropylene thus retains a "dry" surface, while the inner cellulose core retains most of the liquid.
The Comp Wipe 7408 is abrasion resistant, durable and soft. The sandwich process makes it very effective for use with acids in the cleanroom.
Material & properties
Material: 55% cellulose, 45% polypropylene
Colour: white
Basis weight: 88 g/m²
Thickness: 0.69 mm
ISO 5
Low particle
Very effective when used with acids
Packing
400 Wipes in a bag
12 Bags in a carton
PU:
1 pair
Available
Size:
35
Die ESD-Clogs Abeba 37622 sind antistatische Berufsschuhe aus der Easy-Serie.
Größe 35-48
CE, EN ISO 20347:2012, OB, E,FO,A, SRC
Glattleder, weiß/ blau
Fersenriemen feststehend, verstellbar
Rutschhemmende Laufsohle
Auswechselbare acc Wave Einlegesohle (Art. 3573)
Sanitized® behandelt (geruchs- und bakterienhemmend)
Antistatisch / ESD-gerecht nach DIN EN 61340
PU:
Bag with 5 pieces
Der "Vipers Mopp VMSP50" ist ein steriler Einweg Mopp und besitzt ein äußerst hochwertiges Mikrofaser-Besatzmaterial aus 100% Mikro-Polyester.
Dank seiner besonderen Oberflächenstruktur überzeugt dieser Einweg Mopp durch eine hervorragende Reinigungsleistung, eine akkurate Flächenleistung und einem sehr guten Preis-Leistungs-Verhältnis.
Material & Eigenschaften
⦁ Material: Mikrofaser⦁ Länge: 400 mm⦁ Breite: 125 mm⦁ Höhe: 5 mm⦁ Farbe: weiß⦁ Gewicht: 50 g (± 5%) pro Mopp⦁ ISO 4⦁ GMP A⦁ steril (gammabestrahlt)⦁ Ultraschallversiegelte Kanten und Nähte
Anwendung/Einsatzgebiet
⦁ Reinraum-Mopp mit Taschen, für 40 cm Mopp-Systeme⦁ Höchste Reinigungsleistung durch hochwertiges Mikrofaser⦁ Hohe Flächenleistung durch mehrlagigen Flüssigkeitsspeicher⦁ Gleichmäßige und ideale Flüssigkeitsabgabe⦁ Aufnahmekapazität > 500% IEST-RP-CC004.3
Verpackung
⦁ 5 Stück in einem vakuumverpacktem Beutel⦁ 20 Beutel in einem Karton
PU:
1 Piece
Contents:
100 ml
The "Hand Disinfectant Sterillium Gel Pure" is a ready-to-use alcohol-based disinfectant.The perfume- and dye-free hand disinfectant gel is based on a high ethanol content (85%) and thus ensures effectiveness that is as fast as it is comprehensive.
Material & Properties
Active ingredient: 85% Ethanol
Colour: Transparent
Broad spectrum of activity against bacteria, fungi and viruses.
Including norovirus efficacy* within hygienic hand disinfection.
Increases skin hydration with regular use (1)
Excellent tolerability even with long-term use
Excellent immediate effect
Free of dyes and perfumes
Leaves no sticky residue
Fast drying
Packaging
45 bottles in a carton
PU:
1 piece
Size:
S
The "Reusable Cleanroom long Coat" is made of a state-of-the-art cleanroom fabric.
Material & Properties
Material: Polyester + Carbon
Sleeve cuffs on the arms
Press studs on collar
2-way zip fastener
No pockets
Colour: White
Fabric
Warp (polyester filament yarn): 75d
Weft (polyester textured yarn): 100d
Conductive yarn, on warp and weft: 20d
Weave structure: 3/2 twill
Density: 172 x 121 (warp x weft/inch)
Weight: 120 g/m²
Conductive yarn spacing: 4.5mm x 4.5mm grid
Pore size: 20 μm
Particle filtration (IES-RP-CC003.2):
99.0% at 0.3 μm
99.4% at 0.5 μm
Air permeability (ASTM D 737-1996): 3.1 cc/cm² /sec
Water vapour permeability (ASTM E 96-2000): 11.047 g/m² /24h
Tear resistance (ASTM D 5304):
warp: 96.4 kg
Weft: 83.0 kg
Tear strength (ASTM D 2261-1996):
warp: 2.2 kg
Weft: 2.1 kg
Abrasion resistance (ASTM D 3886-99): 266
Clean room class (recommended): ISO 4-5
Frictional static charge (JIS L 1094-1997): Less than 10 V
Drop time to 10% of 5.000V: 0.01 sec
Surface resistivity (ASTM D257): 5.9 x 107 Ω/m²
Particle formation discharged per litre:
4 at 0.3 μm
3 at 0.5 μm
Sterilisation compatibility: steam autoclave, gamma radiation, beta radiation, ETO
Packaging
individually packaged
PU:
Bag with 5 pieces
Der sterile "Einweg Mopp Bezug EFB40-S" mit seinem innovativen Besatzmaterial wurde für höchste Performance bei der Reinraum-Reinigung ausgelegt. Die speziellen Polyester-Bürststreifen lösen bei der wischenden Reinigung selbst hartnäckige Verunreinigungenund Rückstände, welche anschließend im Mikrofaserbesatz sicher aufgenommen werden.
Empfohlen für die Reinigung und Desinfektion nicht steriler Reinraumbereiche.
Material & Eigenschaften
Material Front: 70 % Polyester-Mikrofaser, 30 % Polyester Bürststreifen
Material Deckblatt: 100 % Polyester-Vlies (verfestigt)
Länge: 400 mm ± 5 mm
Breite: 125 mm ± 5 mm
Farbe: weiß mit grüner Einfassung
ISO 5
GMP A/B
Steril
Reinraum-Mopp mit Taschen, 40 cm System
Höchste Performance durch mehrfache Streifen von Mikrofaser + Bürste
Hohe Flächenleistung durch mehrlagigen Flüssigkeitsspeicher
Optimal zur Entfernung von (Desinfektionmittel-) Rückständen
Gleitet optimal auf allen Bodenbelägen
Verpackung
5 Bezüge doppelt verpackt in einem Beutel
20 Beutel in einem Karton (100 Bezüge)
PU:
1 Piece
Available
The "Cleanroom Silicone Keyboard S1" is a completely sealed silicone keyboard with USB interface.
Material & Properties
Material: Silicone plate + ABS casing
Length: 443 mm
Width: 128 mm
Height: 13 mm
Colour: white
Key layout: German
Key size: 15 x 15 mm
Weight: 580 g
Protection class: IP68 (protection against dust and water)
Buttons protrude only 0.5 mm and are easy to clean
Built-in lock button allows cleaning of the keyboard in the
switched on state
Packaging
1 piece in a transport-secured cardboard box