This lightweight cleanroom mop frame has been specifically designed to meet the highest requirements for hygiene, ergonomics and cleaning efficiency in contamination-controlled environments. Used in combination with all Vileda Professional® Swep Duo mop covers, it enables fast, safe and efficient cleaning of floors, walls and ceilings. The double-sided design allows the frame to be flipped over after one side of the mop has been used, maximising cleaning efficiency while reducing the number of mop changes. A spring-assisted mop attachment together with the integrated gripping hole allows fast and effortless mop installation. An integrated release lever enables hands-free mop removal, helping to minimise cross-contamination and support stringent cleanroom hygiene protocols. The lightweight construction, trapezoidal shape and built-in limiter provide excellent control when cleaning corners, underneath equipment and other hard-to-reach areas. The frame is fully autoclavable and compatible with all fixed and telescopic Vileda Professional® handles. FeaturesCompatible with all Vileda Professional® Swep Duo mop covers Double-sided mop frame for increased cleaning efficiency Suitable for floors, walls and ceilings Spring-assisted mop attachment for quick and easy mop fitting Integrated hands-free mop release lever Trapezoidal frame design for effective corner cleaning Lightweight ergonomic construction Compatible with fixed and telescopic Vileda Professional® handles Fully autoclavable Product BenefitsDouble-sided mopping increases productivity by reducing mop changes. Hands-free mop removal minimises the risk of cross-contamination. Lightweight ergonomic design reduces operator fatigue. Ideal for cleaning floors, walls, ceilings and difficult-to-access areas. Trapezoidal shape improves cleaning performance in corners and underneath equipment. Built-in limiter provides enhanced control during overhead cleaning and bucket handling. Fully autoclavable for use in cleanrooms and sterile manufacturing environments. Durable construction using high-quality engineering plastics and stainless steel components. Technical SpecificationsMaterials: Polypropylene (PP), Polyamide (PA), Polyoxymethylene (POM) and Thermoplastic Elastomers (TPE) Metal components: Stainless steel and nickel-plated brass Weight (50 cm frame): 290 g Compatible with: Vileda Professional® Swep Duo mop covers Applications: Floors, walls and ceilings Suitable for autoclave sterilisation
The PurMop ® KEU40 stainless steel mop holder is designed to meet the most demanding requirements and stands out for its superb materials and workmanship. High-performance plastic and high-gloss polished stainless steel surfaces ensure GMP and cleanroom compliance as well as long-term resistance to steam sterilisation (autoclaving). Stainless steel, electropolished Handle made from special plastic Suitable for repeated autoclaving, resistant to disinfectants Ergonomic quick-change system with clip Allows mop attachment without hand contact Precise, detailed workmanship Cleanroom class ISO 3–6 / GMP A/B (recommended) Weight: 600 g
The Clino ® Synchro Hybrid mop holder is an autoclavable mop holder made from stainless steel and high-performance engineering plastics, designed specifically for cleanrooms. An innovative symmetrical opening mechanism makes it easy to insert the mop. Material & Properties Material: Stainless steel and high-performance plastic Length: 400 mm Width: 100 mm Weight: 475 g ISO 5 GMP A/B Metal wings made from high-quality, long-lasting V4A stainless steel Autoclavable Very easy to clean thanks to hygienic design Innovative opening mechanism: Can be opened with hand and foot Symmetrical opening for easier mop insertion 100% contact surface: No slipping of the mop cover Ergonomically optimised working Suitable for telescopic handles CR 370137 and 370138 Packaging 1 piece
The IsoClean GMP mop holder for cleanroom-compatible cleaning of safety cabinets and isolators. Material & Properties Material: Stainless steel Length: 190 mm Width: 50 mm Height: 130 mm Autoclavable With ClinoConnect Lock Packaging 1 piece
The "IsoClean mop holder" for cleaning safety cabinets and isolators in accordance with cleanroom standards. Material & Properties Material: Heat-resistant special plastic Length: 190 mm Width: 50 mm Height: 130 mm Autoclavable with ClinoConnect Lock Packaging 1 piece
The autoclavable Clino ® Synchro CR mop holder with the ClinoConnect Lock fastening system, made from high-performance plastics specifically for cleanrooms. Material & Properties Material: High-performance plastic Length: 400 mm Width: 100 mm Weight: 372 g Colour: grey ISO 5 GMP C/D Hygienic design: easy to clean and specifically designed for cleanrooms Innovative opening mechanism: Can be opened with hand and foot Symmetrical opening for easier mop attachment 100% contact surface: No slipping of the mop cover Ergonomically optimised working Specifically for cleanrooms Suitable for EasyMop CR pre-treatment Suitable for the Ringo GMP flat press Suitable for MopFloat GMP and MopFloat CR Suitable for Solo Packaging 1
The KKV40 mop holder is a lightweight and ergonomic mop holder made of abrasion-resistant plastic, which is easy to clean thanks to its smooth surface. The quick-change system allows the handle to be changed without tools.The KKV40 guarantees even liquid wetting. Material & properties Material: Plastic Length: 388 mm Width: 100 mm Height: 153 mm Colour: grey ISO 6 GMP C/D Opening mechanism with foot actuation Autoclavable Resistant to disinfectants Quick-change system with clip Can be combined with all PurMop(r) handles Locking mechanism for easy ceiling cleaning Lightweight and ergonomic Packaging 1 handle in a bag 5 handles in a box
Contec EasyReach mop holder 2685 Cleaning and sanitising isolators and RABS can often be a very thankless task, where user and product safety is paramount, and therefore not always easy to decontaminate. The EasyReach cleaning tool has been specifically designed to make this task easier. Features and benefits: Mop holder width: approx. 19 cm Specially designed lightweight stainless steel cleaning tool for isolators, RABS, glove compartments and safety cabinets The rectangular shape makes it easier to perform overlapping, straight wiping movements Hinged joint and lightweight design allow for easy one-handed cleaning Specific pre-soaked sterile cleaning pads available as accessories Tight-fitting 100% polyester cleaning pad No slippage during use - allows efficient disinfection and removal of residues Very low particle level - for class A environments Choice of dry or pre-soaked cleaning pads Can be used with a preferred detergent or disinfectant according to existing validation Pre-saturated pads eliminate the need for spray bottles in the controlled environment Flat swivelling attachment Ensures that even the hardest to reach areas can be reached easily, keeping the tool in good contact with the surface at all times Lightweight stainless steel holder and handle bar Suitable for one-handed use, reduces user fatigue, promotes adherence to best wiping practices Can be autoclaved at 121°C and is compatible with a wide range of cleaning and disinfection products, including hydrogen peroxide vapour Rounded edges Ensure there is no possibility of damaging or scratching equipment Short, only 40 cm handle bar (as accessory) Small enough to fit through the smallest transfer port