PU:
25 Pairs per bag
Available
The disposable sleeve cover Taptex sterile is equipped with cuffs. It is recommended for work where soiling or contamination of clothing must be prevented.
Material & Properties
Material: 65% polyester 35% polyethylene
Length: 550 mm
Colour: white
Sterile
Packed in pairs
Packaging
Individually packed
25 pieces per outer bag
4 outer bags per carton (100 pairs)
Tip
PU:
Bag with 100 pieces
The Disposable Beard Protection is made of polypropylene spunbonded fabric and has 2 latex-free elastic bands.This is suitable for easy care and hygiene.
Material & Properties
Material: Polypropylene spunbonded fabric
Length: approx. 480 mm
Width: approx. 240 mm
Colour: white
Basic weight: 10 g/m²
Covering of the whiskers
Latex-free elastics (earloops)
Air-permeable, stable, lightweight
Hygiene, laboratory, industrial, examination and care areas.
Also suitable for HACCP purposes
Only suitable for minimal risks
Packaging
100 pieces in a bag
10 bags in a carton (1000 pieces)
PU:
Bag of 10 pieces rolled up
The overshoes are made of sturdy non-woven fabric. The upper opening of the shoes is formed by an elasticated band edged with an overlock seam. The sole of the foot is rubberised and complies with the HACCP concept.
Technical data
Classification: CAT I according to Regulation (EU) 2016/425 for personal protective equipment (PPE).
HACCP
Non-woven fabric: pure polypropylene
Elasticated band: high-quality polyurethane, latex-free
Sewing thread: 100 % polyester
Dermatological compatibility: No intolerance reactions
Size: Length: 44 cm, width: 16 cm.
Colour: blue, white
Packaging
Bag, 10 pieces rolled up | 100 pieces
PU:
Carton with 90 pairs
Available
The BioClean S-BDSC-L sleeve cover is made of an antistatic, lightweight, low-lint CleanTough material.Rubber cuffs at both ends ensure a secure fit.
Material & Properties
Material: Polyethylene/polypropylene laminate fleece
Length: 500 mm
Colour: white
ISO 4
GMP A
Sterile
Cat III
Excellent ESD properties
Lightweight and low linting
Excellent ESD properties
Packaging
1 pair/sealed PE inner bag
15 inner bags per sealed PE outer bag
6 outer bags (90 pieces) per carton
PU:
Carton of 2000 pieces
A flat standard disposable overshoe that is suitable for any application.
Material & properties
Material: CPE (polyethylene) elasticated rubber band
Elasticated rubber band
Colour: Blue
Weight: approx. 3 g/piece
Size: 410 x 150 mm
Thickness: 0.04 mm
Packaging
100 pieces in a polybag
20 bags per box
PU:
1 Piece
Size:
XS
The BioClean-D Drop-Down Coverall with Hood is a sterile antistatic disposable garment made from low-linting CleanTough material. Its unique design offers true aseptic donning, with internal coloured tabs that indicate safe touch points to prevent contact with the outer surface. The innovative up and over donning design eliminates the risk of the garment touching the ground and strategically placed quick release tabs (to hold and remove while closing the zip) ensure aseptic donning throughout the donning process.
Features
Elasticated back, hood, cuffs and ankles
Foot loop for smooth closing of the zip
Thumb loops for a secure fit
Quick-release press stud tabs for aseptic donning
Low-linting CleanTough material
Antistatic
Silicone-free
Tip
PU:
Bag with 50 Pieces
Available
The RR 55/45 disposable face mask is a well-ventilated disposable face mask for the cleanroom. It is soft and therefore well suited for long wearing times. Automatically manufactured and packed in a class 1000 cleanroom.
Material mask & filter
Outer: 55% polyethyene, 45% polypropylene.
Inside: 55% polyethyene, 45% polypropylene
Filter medium: 100% polypropylene
Noseband: Wire embedded in polyester; WxL 3,5x11,2mm
Ear loop: PET 75% + Spandex 25%, WxL 2x160mmColour: White
Length: 210 mm ± 5 mm
Width: 90 mm ± 5 mm
Particle Test: Air Particle ( >0.3㎛)≤ 500 ea/ft3. // corresponds to: 17,657.35 particles ( >0.3㎛)/ MQ3
Area of application
Semiconductors, TFT-LCD, electronics production lines, food companies and hospitals
Packaging
Individually packed
50 pieces in 1 bag
20 bags in 1 carton
Not a medical product, used for product protection in clean rooms.
PU:
Bag of 20 pieces
The sterile Disposable Hood/Cover Tyvek IsoClean IC 668 B is a gamma-sterilised bonnet processed under cleanroom conditions with internal seams and a bordered hood opening. It has a large face opening and straps and loops.
Material & properties
Material: Tyvek® IsoClean® CS
Size: Uni
Design: Hood with straps
Seams: Bordered
Colour: White
Sizes: One size
Processed and sterilised under cleanroom conditions SAL of 10-6 (ISO 11137-1)
ISO 5
GMP A/B
CAT III
Certified according to Regulation (EU) 2016/425
Partial body protection, category III, type PB [6-B]
EN 14126 (protective clothing against infectious agents)
Packaging
individually packed
20 pieces in one bag
5 bags in a box (100 pieces)
PU:
Carton with 10 Bags
Material & Properties
Antistatic disposable overshoes made of PP fleece
With dissipative, black contact tape
Air-permeable and comfortable
Universal for all shoe types and sizes
Suitable for all Hygomat overshoe dispensers
Colour blue
Length 48cm
CAT 1
Area of application: Industry, food industry and hygiene-sensitive areas
Packaging
Type of inner packaging PE
Type of outer packaging Cardboard
Quantity inner packaging 1 PKG
Quantity outer carton 10 PKG
Quantity CCG1 pallet 60 PKG
Quantity full pallet 180 PKG
LxWxH Outer carton in cm 40.0 x 32.0 x 62.0
Outer carton volume in m³ 0.07936
Outer carton weight in gr. 7,900
PU:
Carton of 90 Pairs
The BioClean-C Sterile Arm Sleeves S-BCSC have been specially developed for protection against a range of cytostatic agents. They are compatible with ISO Class 4 cleanrooms. Made from lightweight, low-lint CleanTough blue material, the sleeve covers have elasticated arms for stability on the arm and are designed for quick and easy donning.
Material & Features
CleanTough & 100% polyester cuffs
Colour: Blue
Length: 400mm
Ultrasonically welded seams (covered with protective tape)
PPE Cat III type PB [6]
Low particle emission
ISO class 4
GMP A/B
Gamma irradiated
Silicone free
Packaging
1 Bag with 15 Pairs
6 Bags in Carton
90 Pairs in Carton
PU:
Bag with 100 Pairs
Material & properties
PP fleece
Very hardwearing
Permeable to air
For overshoe machine Hygomat
Colour blue
Length 46cm
CAT 1
Area of application: Industry, food industry and hygiene-sensitive areas
Packaging
Type of outer packaging Cardboard box
Quantity inner packaging 1 PKG
Quantity outer carton 10 PKG
Quantity CCG1 pallet 60 PKG
Quantity full pallet 180 PKG
LxWxH Outer carton in cm 40.0 x 32.0 x 62.0
Outer carton volume in m³ 0.07936
Outer carton weight in gr. 6,780
PU:
Carton with 10 bags
Material & properties
PP fleece with CPE coating
Water-repellent
Very hard-wearing
Food-safe
Colour white
Length 46cm
CAT 1
Waterproof
Permeable to air
Area of application: Industry, food industry and hygiene-sensitive areas
Packaging
Type of inner packaging PE
Type of outer packaging Cardboard
Quantity inner packaging 1 PKG
Quantity outer carton 10 PKG
Quantity CCG1 pallet 60 PKG
Quantity full pallet 180 PKG
LxWxH Outer carton in cm 40.0 x 35.0 x 64.0
Outer carton volume in m³ 0.0896
Outer carton weight in gr. 9,100
PU:
Bag with 10 pieces
The sterile Disposable Goggles BioClean ClearView BCGS1 is a cleanroom suitable latex free goggle for single use. The goggles are made of lightweight ultra-soft PVC and have an indirect ventilation system to ensure comfort. With PPE Cat 2 certification, it offers personal protection and can be easily worn with goggles.
Material & Properties
Material: PVC/ polycarbonate/ silicone
Weight: 74 g
Lens thickness: 2 mm
Length: 155 mm
Height: 85 mm
ISO 4
GMP A
CAT II
Sterile
Indirect ventilation
Super soft thermoplastic offers unrivalled comfort
Hardened scratch-resistant polycarbonate lens
Lint- and latex-free headband
can also be used as over-glasses
individually packed
Packaging
individually packed
10 pieces in a bag
6 bags in a carton (60 pieces)
PU:
Carton with 1000 Pieces
Available
Color:
Black | White
This flat PP/CPE Overshoe is equipped with a strong non-slip polyethylene sole and a firm fleece material.
Material & properties
Material: Polypropylene nonwoven 40g/m²
Sole material: CPE 0.04mm (chlorinated polyethylene)
Colour: blue/white or white/white
Weight 9.5 g/piece
Dimensions approx. 16 x 40 cm
Elasticated rubber band
Sole with anti-slip coating
Breathable
Comfortable to wear
One size fits all
Packaging
5 pieces per roll
10 rolls in a bag
20 bags in a box (1000 pieces)
Tip
PU:
Carton of 1000 pieces
Color:
Weiß
The spunbond beret bonnets are made of breathable, comfortable and soft spunbond polypropylene (SBPP) material, which is often worn in the clean and hygiene sector, laboratory, cleanroom, hospital L & medical, food industry etc.. It is ideal for economical protection against non-hazardous dust particles and dirt in the work area.
Material & properties
Material: SPP 14 g / sqm
Colour: white, blue or green
Diameter approx. Ø 60 cm
Made from breathable, soft and comfortable material
Soft elasticated band for easy wearing
Latex-free
Wide range of applications
Quality standard
Production under ISO: 9001: 2008
CE category I
PPE Directive 89/686/EEC
FDA
REACH regulation
Material food contact safe EU 10/2011
Suggested use
General hygiene and cleaning regulations
Hospital and medicine
Food industry
Clean room
Household, hotel, etc
Storage
Please store the goods in a dry environment and avoid direct sunlight. Please do not store the goods in a hot environment with temperatures above 40 and humidity above 80%. Keep away from high frequency devices. In general, the shelf life is 3 years. We recommend to use products within 2 years.
Packaging
1 bag with 100 pieces
10 bags in a box (1000 pieces)
PU:
Bag with 500 pieces
Those who find the fastening of a mouthguard with elastic ear bands behind the ears uncomfortable or who want to wear it over a bonnet can use the clip to connect the elastic bands behind the head. The current clip offered here is blue in colour for better visibility and manageability.
Material & Properties
Material: plastic
Colour: blue
Packaging
500 clips in an inner bag
4 inner bags in one outer bag (2000 pieces)
PU:
20 Pieces per Carton
Available
Size:
S
The disposable coverall Tyvek IsoClean IC 193B is a sterile coverall with hood from DuPont. >It has bound internal seams. It also has integrated overboots.
Material & Features
Material: Tyvek
Colour: White
Type 5-B/6-B
Antistatic
Bound, internal seams
With hood and integrated overboots
ISO5
GMP A/B
Cat. III
Packaging
20 pieces in carton
Tip
PU:
1 piece
The SimSafe SC06 coverall is a protective suit with hood made of polyester and polyethylene. It offers high-quality comfort and protection thanks to the innovatively processed bi-component material. The seams are fully taped and the zip at the front has a wide cover.
Material & properties
Material: 65 % polyethylene bicomponent fibre, 35 % polyester
Colour white
ISO 4
PPE CAT III
Protective suit with hood
Thumb loops on cuffs
Elasticated hand and foot cuffs and waist
Unique clean-sealed technology
No adhesives used in the material
Fully taped seams
Front zip with wide cover flap
Excellent protection against cytostatics
Antistatic
Clean
Available sterile and non-sterile
Easy handling thanks to easy open bags
Vacuum packed
IPA-resistant bags
2 year shelf life
Packaging
individually packed
50 pieces in a carton
PU:
Bag with 110 pieces
Product Description
strong disposable overshoes
very hard-wearing CPE (cast polyethylene)
waterproof material
food-safe
universal for all shoe types and sizes
suitable for all Hygomat overshoe dispensers
Colour blue
Length 47cm
CAT 1
Area of Application
Industry, food industry and hygiene-sensitive areas
Packaging
Bag with 110 pieces
PU:
Carton with 40 Pieces
Size:
M
The S-BCAS cytostatic sleeve apron has sleeves and protects against a wide range of chemotherapy drugs. Made from a lightweight, low-lint CleanTough material, the aprons have an adjustable neck fastening, drawstrings at the back and ultrasonically welded sleeve seams with protective tape.
Material & Features
Material: polyethylene/polypropylene laminate fleece
Colour: blue
ISO 4
GMP A
Sterile
Tested against the permeation standard ASTM F739-12
Ultrasonically welded seams with protective tape
Drawstrings at the back
Adjustable neck fastening
Lightweight
low lint
Packaging
double packed
1 piece in a bag
40 bags in a box (40 pieces)
PU:
carton with 100 pieces
The sterile Tyvek® IsoClean® bonnet IC 689 B WH TS comes with an attached blue mask and straps.The bonnet has glued inner seams as well as a glued face opening. Straps for an adjustable fit in the chest area.
Material & properties
Bonnet material: IsoClean®
Mask material: Polyethylene
Bonnet size: Universal
Make width: 175 mm
Colour bonnet: white
Colour mask: blue
ISO 5
GMP A/B
Sterilised by gamma irradiation up to a SAL of 10-6 (ISO 11137-1)
Bacterial filtration efficiency (3.0 micron) ASTM F2101=98.9 %
Base weight: 1.24 oz/yd²
Bacterial filtration efficiency of the mask (3.0 micron) ASTM F2101=> 94 %
Particle filtration efficiency of the mask (0.1 micron) ASTM F2299=> 80 %
Packaging
individually packed
50 pieces in an outer bag
2 outer bags in a box (100 pieces)
PU:
Carton with 75 Pairs
The BioClean-D S-BDOB overboots are intended for single use. It is made from the antistatic, low-lint CleanTough material. It has a non-slip sole and a strap fastener for quick and easy donning. To ensure its specific sterile properties, the product has undergone gamma irradiation and has been specially developed to be compatible for use in ISO Class 4 cleanrooms. The easy pull-on cleanroom overboots in one size are individually sealed in pairs in a plastic bag.
Material & Features
Material: Polyethylene/polypropylene laminate fleece
Universal size
Colour: white
sterile
ISO 4
GMP A
CAT III
Suitable for cytostatics
Lightweight, low-lint CleanTough material
Entry with elasticated band for a secure fit
Simple strap fastening for a secure hold on the leg
Non-slip sole
Packaging
1 pair in a sealed PE inner bag
15 inner bags per sealed PE outer bag
5 outer bags in a box (75 pairs)
PU:
100 Pieces per Carton
Size:
M
The IsoClean overboot IC 458 has an anti-slip sole. Covered elasticated calf straps. Ankle straps. Elasticated leg ends. Gripper™ sole. Bound, internal seams. Not processed under cleanroom conditions and not sterilised. White colour.
Material & properties
Material: Tyvek® 500
Colour: White
edged seams
slip-resistant sole
ISO 6
GMP C/D
Certified according to Regulation (EU) 2016/425
Partial body protection, category III, type PB [6-B]
EN 14126 (protective clothing against infectious agents)
Packaging
not individually packed
2 polyethylene inner sleeves
100 pieces in box
PU:
Carton of 20x5 pieces, 1 set per bag
DuPont Tyvek® IsoClean® hood and mask, model IC 9820 WH MS. Processed under cleanroom conditions and gamma-sterilised. Hood: Seams are taped. Framed head opening. Straps with loops. White colour. Mask: Folded outer layer made of polyethylene. 17.5 cm sterile. Blue.
Material: Tyvek® IsoClean® CS
Design: Combination of hood and mask
Seams: Seamed
Colour: Hood: white, mask: blue
Size: One size
Gamma sterilised according to SAL of 10-6 (ISO 11137-1)
PPE category I
PU:
Carton with 10 x 50 pieces
The Kimtech Pure M3 #62451 non-sterile face mask provides the essential process protection and comfort required in cleanroom environments, helping you to reduce the risk of contamination.
Material & Features
Outer mask made of clear, perforated polyethylene film
Low-lint outer polythene film layer
Ear loops: White tubular knitted polyester
Latex and silicone free
3-ply
Integrated nose clip offers a high level of comfort
Width: approx. 230 mm
Recommended for ISO class 3 or higher cleanroom environments
Excellent particle filtration to prevent contamination
Manufactured with Sontec II ultrasonic bonding for improved product integrity and strength
Double bagged for cleanroom use
Product performance data
Particle filter efficiency (PFE): >96.9%
Differential pressure in mm H2O, at 8 l/mm flow: 1.33
Packaging
Bag with 50 pieces
10 bags in a carton
PU:
1 Bag with 100 Pieces
Available
The Overshoe with carbon strip is a disposable overshoe made of polypropylene and a conductive polyester strip.
Material & Properties
Shoe material: Polypropylene
Conductive strip material: Polyethylene
Length : 480 mm mm
Length of conductive strip: 810 mm
Width: 165 mm
Width of conductive strip: 20 mm
Weight: 36 g/m2
Colour: blue
Packaging
100 pieces in a bag
10 bags in carton (1000 pieces)
PU:
Carton with 1000 Pieces
Available
Color:
White
The PP Overshoe is a lightweight and breathable overshoe with a white anti-slip pattern on the sole.
Material & properties
Material: Spunbonded polypropylene (spunbond)
Sole with patterned anti-slip coatin
Elastic strap
Basic weight: 40g/m²
Colour: white or blue
Dimensions Approx. 16 x 45 cm
Flat design
Breathable fabric
Very light
Tear resistant
Packaging
10 pieces in a roll
10 rolls in a bag
10 bags in a carton
PU:
30 Pairs per Bag
Available
The disposable BioClean-D S-BDOB-L provides exceptional comfort and protection. Longer (height 500 mm) overboots are made of anti-static, low-linting CleanTough material and feature a non-slip sole and easy lace-up closures at the top and ankle.
Material & Properties
Material: Antistatic BioClean-D CleanTough white material & polyurethane sole
Length: 500mm
Colour: White
Sterile
PPE Category III, Type PB [6]
Antistatic according to EN 1149-5
Silicone-free
Construction: Tied seams with single-needle stitching
Classification: PPE Cat. 3 Type PB[6]
Antistatic according to EN 1149-5* & low particulating
ISO class 4
Low linting
Lace fastenings on top and ankle
Non-slip sole
Silicone-free
Quality standards
Manufactured in a factory with ISO 9001:2015 and (EU)2016/425 Module D certifications
Complies with Category 3 - Personal Protective Equipment Regulation (EU)2016/425
Tested according to standard EN ISO 13034:2005+A1:2009 Protective clothing against liquid chemicals (type PB[6])
Tested according to standard EN ISO 14325 Protective clothing against chemicals
Tested according to standards: EN 1149-5:2008*, Protective clothing -.
electrostatic properties; EN 530, abrasion resistance; EN 7854, flex tear resistance; EN 6530, resistance to liquid penetration; EN 13934-1, tensile strength; EN 9073-4, trapezoidal strength; EN 863, puncture resistance; and EN 13935-2, seam strength
Tested according to permeation standard ASTM F739-12
Processed in a NEBB-certified ISO Class 4 environment
Particle Shedding (Helmke Drum Test) <260 Category I
Packaging
30 pieces/sealed PE inner bag
1 PE inner bag/sealed PE outer bag
5 PE outer bags (150 pieces)/outer carton
PU:
Carton of 250 pieces
DuPont Tyvek® IsoClean® bonnet, model IC 729 S WH 00, processed under cleanroom conditions and not gamma-sterilised. Elasticated. White colour.
Material & Properties
Material: Tyvek® 500
Seams: No seam
Colour: White
One size fits all
Certified according to Regulation (EU) 2016/425
Partial body protection, category III, type PB [6-B]
EN 14126 (Protective clothing against infectious agents)
Suitable for GMP class C/D cleanrooms (ISO class 6-9)
PU:
10 Bags per Carton
The Tyvek® IsoClean® bonnet is processed and gamma-sterilised under cleanroom conditions. It has an elasticated band and no seams.Reference number: IC 729 S WH MS
Material & properties
Material: Tyvek® IsoClean® CS
Design: Hood with elasticated band
Seam: No seam
Colour: White
Sizes: One size D15466053
PPE category I
Packaging
individually packed
25 pieces in 1 bag
10 bags in a box (250 pieces)
PU:
Carton with 100 Pieces
Available
Size:
M
Protective suit against infectious agents such as coronavirus, limited quantities available from stock!
The Tyvek 600 Plus is a coverall with a hood. It has taped seams and covered elasticated cuffs, leg ends and hood. Glued-in elasticated back. Self-adhesive zip and chin cover.
Material & properties
Material: Tyvek 600
Design: Suit with hood, elasticated waist and thumb loops
Base weight: 41.5 g/m2
Colour: white
Taped seams for protection and durability, blue
Tyvek® zip and zip cover for increased impermeability
Certified according to Regulation (EU) 2016/425
Chemical protective clothing, category III, type 4-B, 5-B and 6-B
EN 14126 (protective clothing against infectious agents)
Antistatic finish (EN 1149-5) - on both sides
CAT III
Packaging
individually packed
100 pieces in a box
PU:
Carton with 50 pieces
Available
Size:
M
The visitor coat / work coat made of polypropylene spunbonded fabric has a collar. It also has elasticated wrists and 4 press studs on the front.
Material & Properties
Material: Polypropylene spunbonded fabric
Colour: white
Basic weight 40 g / m²
with collar
elastic wrists
4 front press studs
no pockets
Soft
light
non-toxic
breathable
good barrier against moisture and dust
good air permeability
good strength
Packaging
1 piece in a transparent bag with size indication (individually packed)
50 pieces in a carton
PU:
Carton of 50 Pairs
Size:
S (37 cm)
The IsoClean overboot IC 458B WH MS has an anti-slip sole. Covered elasticated calf straps. Ankle straps. Elasticated leg ends. Gripper™ sole. Bound, internal seams. Processed and gamma-sterilised under cleanroom conditions. Aseptically folded.
Material & properties
Material: Tyvek® IsoClean® CS
Sterile
Colour: White
bordered seams
anti-slip sole
ISO 5
GMP A/B
Certified according to Regulation (EU) 2016/425
Partial body protection, category III, type PB [6-B]
EN 14126 (protective clothing against infectious agents)
Processed and sterilised under cleanroom conditions SAL of 10-6 (ISO 11137-1)
Packaging
Individually packed in pairs
20 pieces in an outer bag
2 polythene inner bags
100 pieces in a carton
PU:
Carton with 40 pieces
Size:
M
The BCAS cytostatic sleeve apron has sleeves and protects against a wide range of chemotherapy drugs. Made from a lightweight, low-lint CleanTough material, the aprons have an adjustable neck fastening, drawstrings at the back and ultrasonically welded sleeve seams with protective tape.
Material & Features
Material: polyethylene/polypropylene laminate fleece
Colour: blue
ISO 4
CAT III
Suitable for cytostatics
Adjustable neck fastening
Drawstrings at the waist
Attached sleeves with elasticated cuffs
Material: Lightweight, low-lint & durable CleanTough fabric with 100% polyester cuffs
Ultrasonically bonded seams with protective tape
Packaging
individually packed
40 pieces in a box
PU:
100 Pairs per outer bag
Available
The disposable socks are made from 100% polypropylene staple fibres. The material is breathable and at the same time offers protection against bacteria on the inside of shoes (rental shoes, work shoes). Elasticated rubber bands provide a secure hold and ensure a perfect fit.
The product is a non-invasive product and does not contain any hazardous toxic substances according to REACH.
Material & Properties
Material: 100% spunbonded polypropylene
Universal size
Length: 330 mm
Width: 170 mm
Breathable
elasticated rubber bands
secure hold and perfect fit
Packaging
1 pair in an inner bag
100 inner bags in an outer bag
10 outer bags in a box (1000 pairs)