The Cleanroom Wipe VIPERS® TiO2-F is manufactured with double knitted continuous filament made of polyester. The special feature of this wipe is that it is free of titanium oxide. Material & Properties Material: Polyester length: 10 cm Width: 10 cm Thickness: 0,35-0,45 mm ± 0,05 mm Colour: white Basis weight: 140 g/m² ISO 4 Double knit endless filament Free of titanium oxide (TiO²) Edges ultrasonic and laser welded Absorbency: 180 ml/m² High absorbency and wiping performance Control of submicron particles and chemical residues Double and vacuum packed in clean room Packaging 600 wipes in a bag 10 bags in a carton ( 6000 wipes)

The RR 55/45 disposable face mask is a well-ventilated disposable face mask for the cleanroom. It is soft and therefore well suited for long wearing times. Automatically manufactured and packed in a class 1000 cleanroom. Material mask & filter Outer: 55% polyethyene, 45% polypropylene. Inside: 55% polyethyene, 45% polypropylene Filter medium: 100% polypropylene Noseband: Wire embedded in polyester; WxL 3,5x11,2mm Ear loop: PET 75% + Spandex 25%, WxL 2x160mmColour: White Length: 210 mm ± 5 mm Width: 90 mm ± 5 mm Particle Test: Air Particle ( >0.3㎛)≤ 500 ea/ft3. // corresponds to: 17,657.35 particles ( >0.3㎛)/ MQ3 Area of application Semiconductors, TFT-LCD, electronics production lines, food companies and hospitals Packaging Individually packed 50 pieces in 1 bag 20 bags in 1 carton Not a medical product, used for product protection in clean rooms.

The "Cleanroom Vinyl Glove" is the most cost-effective representative among the disposable gloves and scores points due to the pleasantly soft material that is created when plasticisers are used in the production process.Vinyl gloves have limited stretch and tear easily. Furthermore, they can only be used in areas with a low risk factor and are rather unsuitable for work requiring a high degree of dexterity. Material & Properties Material: Vinyl Length: Min. 300 mm Thickness: Min. 0.08 mm ± 0.02 mm Colour Natural white/semitransparent Powder-free Latex-free Can be worn on both sides Rolled edge Very low particle emission Supple and smooth Plasticiser-free raw material; contains no phthalates, phenols, bisphenols A and nonylphenols Recommendation: ISO 5 Elongation Min. 350 %. Tensile strength Min. 9 Mpa Surface resistance≤ 5.798 Ω Particle release (LPC) 6.960 particles/cm² (0,5~1,00μm) Packaging Bag of 100 pieces 10 bags in carton (1000 pieces)

The "Overshoe with Carbon Strip" is a blue overshoe made of SMMS non-woven fabric with black conductive carbon strip (98 % polyester, 2 % conductive threads). SMMS fabric garments are strong and durable yet provide excellent comfort, breathability, softness and wearability, preventing and isolating dust, particles, alcohol, blood, bacteria and virus penetration. Widely used in high class protective medical industry , laboratory, electronic, pharmaceutical. Material & Properties Material: SMMS non-woven fabric Carbon tyre: 98%polyester, 2%conductive threads Colour: blue Weight: 9g / piece Length: 400 mm Height: 170 mm Surface resistance 106 / 107 Ohm Material thickness: 7,5mil Resistance: The materials do not react or discolour after friction with a cloth soaked in 70/30 IPA The non-woven material is made of polypropylene, which should be resistant to many solvents. However, the strip may have limited resistance, especially to chlorinated hydrocarbons or amines and ammonia Packaging 300 pairs in a carton

Our new SimStep permanent adhesive mat is a high-performance decontamination mat with outstanding properties. Full service - for you right from the start. Consultancy, planning, project management. Our specially trained installation team will support you with your SimStep project right through to professional installation. If you wish, we can also regularly check the performance of the installed SimStep mats directly on your premises. Ask for your personalised quote! Features Colour: Blue Long service life - 5+ years on average No size or area limits Easy to maintain Low profile mat design Fully sealed surface; bordered by black bevelled edge strips No outgassing from polymer - 100% DOP free Safe for all cleanroom environments Antimicrobial technology that prevents the growth of bacteria Low profile yet highly stable mat can withstand heavy trolleys and pallet trucks Advantages Reduces the number of particles and germs Environmental savings - replaces disposable adhesive mats, reduces waste and eliminates labour for consumables to be produced and delivered Significantly reduces air pollution Correct placement of the SimStep mat prevents cross-contamination The polymer surface provides a comfortable walking surface 3 steps or 3 wheel rotations guarantee 100% particle and bacteria removal Complete decontamination in large and unavoidable control zones Does not lose effectiveness even after repeated use Disposable overshoes do not get stuck No transfer of adhesive to critical areas SimStep mats are recyclable Maximum economic efficiency Cost savings due to elimination of purchasing, storage and replacement of conventional peel-off adhesive mats Technical data Mat width: approx. 200 cm (+6.4 cm edge material per side) Length: 100-1000 cm (can be ordered in increments of 100, +6.4 cm edge material per side), but can easily be cut to the desired dimensions Thickness: approx. 2 mm Surface resistance: 108 Ohm Load capacity: approx. 90 kg/cm2 Heat resistance: 0-52°C In addition to the mat, the scope of delivery also includes adhesive and edging material

Our new SimStep Tough permanent adhesive mat is a high-performance decontamination mat with outstanding properties and extreme resilience, also suitable for forklift trucks. Full service - for you right from the start. Consultancy, planning, project management. Our specially trained installation team will support you with your SimStep project right through to professional installation. If you wish, we can also regularly check the performance of the installed SimStep mats directly on your premises. Ask for your personalised offer! Features Colour: Blue Long service life - 5+ years on average No size or area limits Easy to maintain Low profile mat design Fully sealed surface; bordered by black bevelled edge strips No outgassing from polymer - 100% DOP free Safe for all cleanroom environments Antimicrobial technology that prevents the growth of bacteria Low profile yet highly stable mat can withstand heavy trolleys, pallet trucks and even forklift traffic Advantages Reduces the number of particles and germs Environmental savings - replaces disposable adhesive mats, reduces waste and eliminates labour for consumables to be produced and delivered Significantly reduces air pollution Correct placement of the SimStep mat prevents cross-contamination The polymer surface provides a comfortable walking surface 3 steps or 3 wheel rotations guarantee 100% particle and bacteria removal Complete decontamination in large and unavoidable control zones Does not lose effectiveness even after repeated use Disposable overshoes do not get stuck No transfer of adhesive to critical areas SimStep mats are recyclable Maximum economic efficiency Cost savings due to elimination of purchasing, storage and replacement of conventional peel-off adhesive mats Technical data Mat width: approx. 200 cm (+6.4 cm edge material per side) Length: 100-1000 cm (can be ordered in increments of 10, +6.4 cm edge material per side), but can easily be cut to the desired dimensions Thickness: approx. 2.6 mm Surface resistance: 108 Ohm Load capacity: approx. 130 kg/cm2 Heat resistance: 0-52°C In addition to the mat, the scope of delivery also includes adhesive and edging material.

The Han-Fit cleanroom glove is an IAB own brand. It is made of high-quality, seamless nylon, is uncoated and therefore offers a very high level of climate comfort. The glove is therefore also used as an underglove in cleanrooms. The nylon gloves from the Han series are very robust and ideal for general work in clean environments and cleanrooms from ISO 7. Material & properties Material: nylon Length: approx. 240 mm Colour: white ISO 7 KAT II Uncoated can be ideally worn as a glove under disposable rubber gloves Hand-specific High climate comfort and high tactile sensitivity Non-slip Low linting Abrasion resistant Silicone-free Coloured cuff to differentiate between sizes Areas of application: Automotive industry Product protection Precision mechanics Optics Underglove in cleanrooms Packaging 10 pairs in a bag 24 bags per box (240 pairs)

Our new SimStep Tough permanent adhesive mat is a high-performance decontamination mat with outstanding properties and extreme resilience, also suitable for forklift trucks. Full service - for you right from the start. Consultancy, planning, project management. Our specially trained installation team will support you with your SimStep project right through to professional installation. If you wish, we can also regularly check the performance of the installed SimStep mats directly on your premises. Ask for your personalised offer! Features Colour: Grey Long service life - 5+ years on average No size or area limits Easy to maintain Low profile mat design Fully sealed surface; bordered by black bevelled edge strips No outgassing from polymer - 100% DOP free Safe for all cleanroom environments Antimicrobial technology that prevents the growth of bacteria Low profile yet highly stable mat can withstand heavy trolleys, pallet trucks and even forklift traffic Advantages Reduces the number of particles and germs Environmental savings - replaces disposable adhesive mats, reduces waste and eliminates labour for consumables to be produced and delivered Significantly reduces air pollution Correct placement of the SimStep mat prevents cross-contamination The polymer surface provides a comfortable walking surface 3 steps or 3 wheel rotations guarantee 100% particle and bacteria removal Complete decontamination in large and unavoidable control zones Does not lose effectiveness even after repeated use Disposable overshoes do not get stuck No transfer of adhesive to critical areas SimStep mats are recyclable Maximum economic efficiency Cost savings due to elimination of purchasing, storage and replacement of conventional peel-off adhesive mats Technical data Mat width: approx. 200 cm (+6.4 cm edge material per side) Length: 100-1000 cm (can be ordered in increments of 10, +6.4 cm edge material per side), but can easily be cut to the desired dimensions Thickness: approx. 2.6 mm Surface resistance: 108 Ohm Load capacity: approx. 130 kg/cm2 Heat resistance: 0-52°C In addition to the mat, the scope of delivery also includes adhesive and edging material.

The "Overshoe with carbon strip" is a disposable overshoe made of polypropylene and a conductive polyester strip. Material & Properties Shoe material: Polypropylene Conductive strip material: Polyethylene Length : 480 mm mm Length of conductive strip: 810 mm Width: 165 mm Width of conductive strip: 20 mm Weight: 36 g/m2 Colour: blue Packaging 100 pieces in a bag 10 bags in carton (1000 pieces)

Our new SimStep permanent adhesive mat is a high-performance decontamination mat with outstanding properties. Full service - for you right from the start. Consultancy, planning, project management. Our specially trained installation team will support you with your SimStep project right through to professional installation. If you wish, we can also regularly check the performance of the installed SimStep mats directly on your premises. Ask for your personalised quote! Features Colour: Grey Long service life - 5+ years on average No size or area limitation Easy to maintain Low profile mat design Fully sealed surface; bordered by black bevelled edge strips No outgassing from polymer - 100% DOP free Safe for all cleanroom environments Antimicrobial technology that prevents the growth of bacteria Low profile yet highly stable mat can withstand heavy trolleys and pallet trucks Advantages Reduces the number of particles and germs Environmental savings - replaces disposable adhesive mats, reduces waste and eliminates labour for consumables to be produced and delivered Significantly reduces air pollution Correct placement of the SimStep mat prevents cross-contamination The polymer surface provides a comfortable walking surface 3 steps or 3 wheel rotations guarantee 100% particle and bacteria removal Complete decontamination in large and unavoidable control zones Does not lose effectiveness even after repeated use Disposable overshoes do not get stuck No transfer of adhesive to critical areas SimStep mats are recyclable Maximum economic efficiency Cost savings due to elimination of purchasing, storage and replacement of conventional peel-off adhesive mats Technical data Mat width: approx. 200 cm (+6.4 cm edge material per side) Length: 100-1000 cm (can be ordered in increments of 100, +6.4 cm edge material per side), but can easily be cut to the desired dimensions Thickness: approx. 2 mm Surface resistance: 108 Ohm Load capacity: approx. 90 kg/cm2 Heat resistance: 0-52°C In addition to the mat, the scope of delivery also includes adhesive and edging material

The Riverstone LE-TACKY is a nitrile cleanroom glove with very low residue values. Unlike other nitrile gloves, no sulphur or zinc oxides are added to the glove during manufacture. The very good stretch behaviour exceeds that of the nitrile gloves known to us to date - even that of some neoprene gloves by far. Material & properties Material: 100 % nitrile Colour: White Length: 300 mm Thickness: 0.08 mm +/- 0.02 mm Wearable on both sides ISO 4 Hardly extractable substances Powder-free Latex-free Textured fingertips Rolled edge Very low particle release Very stretchy, supple and non-slip Without plasticisers, contain no phthalate ester, silicone oil and amide Washed with 0.1m high-resistance water with> 17 MegaOhm water and packaged in an ISO 4 cleanroom environment Packaging 100 pieces per bag 10 pouches per carton  

InSpec IPA is a ready-to-use disinfectant consisting of a 70% alcohol solution (isopropanol) and 30% ultrapure water WFI quality. The product can be used for wiping down equipment, hard surfaces (floors, walls and ceilings) and spraying gloved hands. InSpec IPA is manufactured according to GMP standards in an ISO 6 cleanroom. The product is filled and capped under an ISO Class 5 laminar flow. Material & properties Solution of 70% alcohol and water of WFI quality Fast acting Leaves little residue Fast acting Bactericidal and fungicidal effect Validated three-month shelf life after opening All formats are produced with WFI grade water Each bottle is packed with two sachets Ideal disinfectants for surfaces and aseptic transfer Manufactured in accordance with Good Manufacturing Practice (GMP) Packaging 6 bottles in a carton

The VMP50 disposable mop is a high-quality, non-sterile microfibre mop. The Vipers VMP50 mop has an extremely high-quality microfibre trim material made from 100% micro polyester. Thanks to its special surface structure, this disposable mop impresses with its outstanding cleaning performance, accurate surface coverage and excellent value for money. Material & properties Material: Micro polyester / microfibre Colour: White Length: 400 mm Width: 125 mm Weight: 50 g (+/- 5%) ISO 4 GMP C/D Absorption capacity > 400%, max. 743% (5684 ml/²) Compatible for use with solvents such as IPA Application/area of use Recommended for cleaning and decontamination of GMP rooms/cleanroom environments Cleanroom mop with pockets, for 40 cm mop systems Highest cleaning performance due to high-quality microfibre High area performance thanks to multi-layered liquid reservoir Even and ideal liquid release Packaging 5 pieces in a bag 20 bags in a box (100 pieces)

The SimLite Fit glove is an uncoated 18 gauge nylon knitted glove that is suitable as a light assembly or underglove. Material & Features Material: Nylon Length: approx. 200 - 250 mm depending on size Thickness: approx. 0.08 mm ± 0.02 Colour: White Knitted 18 gauge Knitted cuff, individual cuff colour for each size Very thin like a second skin and yet robust Outstanding comfort and perfect fit Suitable for light assembly work and as an underglove Extremely light Uncoated Packaging 10 pairs per bag 24 bags per box (240 pairs)

The VIPERS® StarSat VPC68 cleanroom wipe is a non-woven wipe impregnated with IPA in a resealable bag. Material & properties Material: 55% cellulose / 45% polyester Length: 230 mm Width: 230 mm Thickness: 0.30 mm ± 0.02 mm Colour: white Base weight: 68 g/m2 ISO 5 Edge cut: Laser cut 70 % IPA (isopropyl alcohol) and 30 % deionised water (DIW) Absorption capacity: 288 ml/m2 For wiping and cleaning in critical environments Increases solvent control and accountability Packaging 50 pieces in a resealable bag 24 sachets in a box

The "InSpec N10" is a powerful alkaline cleaning agent for cleanroom walls, floors,ceilings and work surfaces.Specially developed for permanent adhesive mats.It is used for the removal of process residues and general soiling. It is an excellent cleaner, but leaves more residue than N7.Ready to use spray bottle, diluted with WFI water quality. Material & Properties Material: 4% alkaline detergent Colour: light yellow ISO 5 suitable for cleaning by hand Validated three-month shelf life after opening 2 years shelf life Application Non-sterile InSpec N10 is designed for cleaning hard surfaces by spraying, wiping by hand and with a mop. Spray at a distance of approx. 15-20 cm. 5 litre versions, pour into suitable container for mop wiping. For mop application, add 100 ml concentrate to 2.5 litres of water. Apply to surface for complete coverage. Packaging Single purchase: 1 litre spray bottle (piece) 6 bottles in a carton

The Vipers P140 cleanroom wipe is an ultra-soft polyester knitted wipe with a high filament count. This makes it softer and more absorbent than conventional polyester cloths. Material & Properties Material: Polyester Dimensions: 10x10 cm, 15x15 cm or 23x23 cm Basic weight 140 g/m² Colour white Thickness 0.38 mm ISO 4 Ultrasonically sealed edges Solvent resistant Extremely low-linting and very low particle release Pick-up capacity 415 ml/m Pick-up speed ≤ 1.0 sec.

PROSAT 911 Wipes consist of 100 % polypropylene wipes soaked in a solution of 70 % isopropanol alcohol and 30 % deionised water in a resealable bag. PROSAT Wipes use a meltblown polypropylene wipe that is exceptionally clean because it is free of any additives and has a very low sodium concentration. Increase solvent control and detectability and reduce VOC emissions. Compatible with ISO Class 5 cleanrooms Material & Properties Wipe material:Polypropylene Wipe construction:Meltblown non-woven fabric Saturation solution; (mixing ratio and ingredients): 70% isopropyl alcohol / 30% deionised water 230 x 280 mm Packaging 30 wipes in inner bag 10 bags in outer bag 5 outer bags in a carton (1500 wipes)