Pharma, Medical Technology & Biotechnology
Cytostatic drugs are highly effective CMR drugs (carcinogenic, carcinogenic, mutagenic, teratogenic), the safe handling of which requires the highest protective measures. These include specially tested protective clothing as well as consistent disinfection and cleaning of work surfaces, equipment and furniture. In our cyto shop, we offer you a comprehensive range of sterile and non-sterile products that meet the strict requirements of GMP-compliant production of cytostatics. This ensures maximum protection in laboratories, pharmacies and manufacturing areas.
Polychloroprene Glove BioClean Ultimate
The BioClean Ultimate (manufacturer's code: BUPS) from Ansell is a sterile cytostatic protective glove made of polychloroprene with excellent antistatic properties and improved grip thanks to its textured surface. The glove is latex-free to eliminate type 1 latex allergies. Excellent chemical and cytotoxic protection and exceptional tactile sensitivity. The BioClean Ultimate is part of the BioClean-C chemotherapy range. Material & Properties Material: Polychloroprene Colour: Natural Length: 300 mm (12") Shape: hand-specific Surface: textured Powder-free Latex-free Rolled edge Sterile (sterilisation method: gamma irradiation) AQL: 0.65 Recommendation: Cleanroom class ISO 4 and GMP A Standards and classifications DIN EN 420:2003 DIN EN 455 (Part 1, 2 & 3) DIN EN 374-1:1, 2 & 3:2003 Category 3 ASTM 6978-05 tested against cytotoxic drugs / pharmaceuticals Packaging One pair per sealed inner EasyTear PE bag 10 bags per sealed outer PE bag 20 outer bags per lined box (200 pairs)
Disposable Coverall BioClean-D S-BDCCT
The BioClean-D S-BDCCT sterile coverall with collar has a front zip with protective flap, an elasticated back, cuffs and ankles and thumb loops for a secure fit. The anti-static, lightweight, low-lint CleanTough material offers comfort and protection against a range of chemicals. Material & Features Material: polyethylene / polypropylene laminate fleece sterile Colour: white ISO 4 GMP A CAT III Suitable for cytostatics Antistatic, lightweight, low-lint CleanTough material Thumb loops for a secure fit Zip with reclosable protective cover Elasticated back and arm/leg cuffs Quality systems: Manufactured in an ISO 9001:2008 certified facility Packaging double packed 1 piece in a bag 20 bags in a carton (20 pieces)
Neoprene Glove TouchNTuff 73-500
The sterile Neoprene glove TouchNTuff #73-500 is free of accelerator chemicals and offers an outstanding combination of touch sensitivity and robustness in sterile environments. Material & Properties Material: Neoprene (polychloroprene)Length: 300 mmWall thickness: min. 0,11 mmColour: beigeISO 5GMP AsterileSuitable for cytostatics according to ASTM D6978 (not listed in US FDA 510k)Form: Anatomical with forward curved fingersPowder-freeSmoothGAMMA irradiation (25kGy)Contains no natural rubber latexThin gloves for exceptional tactile sensitivityResistant to a wide range of chemical splashesIdeal for double glovingAvoids Type I latex and Type I chemical allergyPolyurethane inner coating allows easy on/off with dry or wet hands Packaging 1 Pair individually packed10 Pairs in a PE inner bag5 PE inner bags in a PE outer bag4 PE outer bags in a carton (200 pairs)
Disposable Coverall BioClean-D S-BDCHT
The sterile disposable Coverall BioClean-D S-BDCHT has a front zip with protective cover, elasticated back, hood, back and arm/leg cuffs and thumb loops for a secure fit. The anti-static, lightweight and low-lint CleanTough material offers comfort and protection against a wide range of chemicals. Material & Features Material: Polyethylene/polypropylene laminate fleece Fabric: CleanTough Colour: White Front zip with cover Elasticated hood, back, arm and leg cuffs Thumb loops on the wrist for easy donning Sterilisation method: Gamma irradiation Pouch printing: IPA-resistant ink ensures pouches can be wiped clean with cleaning or sterilisation fluids without fear of cross-contamination Quality systems: Manufactured in an ISO 9001:2008 certified facility ISO Class 4 EU GMP A/B CAT. III CE 0120 PPE category 3, type 5 & 6 DIN EN 1149-1 Packaging 1 piece per sealed PE inner bag 1 inner bag per sealed PE outer bag 20 outer bags per outer box (20 pieces) Note for sizes XXXL, XXXXL, 5XL, 6XL and 7XL: 15 pieces per outer box.
Cleanroom Reusable Coverall - IAB
This washable Cleanroom Coverall is made from state of the art cleanroom fabric. Material & Properties Material: 98% Polyester / 2% Carbon Colour: light blue Weave structure: 3/2 Twill Basic weight: 120 g/m² ISO 4 Particle filtration 0.3 µm: 99.0% Sleeve cuffs at the arms Press studs on collar and trouser leg Adjustable elastic at the back Cleanroom fabric Autoclavable Possible sterilisation methods: Steam autoclave, gamma irradiation, beta irradiation, ETO Packaging Individually packed
Polychloroprene Glove DermaShield 73-711
The DermaShield 73-711 is a sterile cleanroom glove made of polychloroprene (neoprene) that has the comfort and flexibility of natural rubber latex. The neoprene formulation minimises the risk of allergies and offers better chemical protection. The perfect glove for use in the pharmaceutical industry. Standards such as DIN EN 374 and DIN EN 421 are of course fulfilled. Material & properties Material: Neoprene (polychloroprene) Length: 310 mm Thickness: palm 0.15 mm Colour: green ISO 5 GMP A Textured fingertips Sterile Powder-free Resistant to a wide range of cytostatics Good chemical resistance Packaging Packed in pairs in a PE inner bag 50 pairs in an outer bag 4 outer bags in a carton (200 pairs)
Overall Tyvek® 500 Xpert
TYVEK® 500 Xpert (formerly TYVEK® Classic Xpert) - above-average protection performance and innovative protection down to the last detail. Based on decades of practical experience, DuPont's new TYVEK® 500 Xpert (model CHF5) now offers even greater protection against a wide range of hazards, including splashes of water-based chemicals, asbestos, pharmaceutical and radioactive particles, and biological hazards. This disposable coverall is the latest generation of the flagship chemical protective garments in Category III, Type 5B and 6B. It offers 6x greater protection against solid flying particles than its predecessor, the TYVEK® Classic, and 10x greater protection than suits made of microporous film. It also has 3x more protection against liquids than suits with conventional quilted seams.Application areasIts superior Type 5/6 protection is based on the inherent barrier properties, comfort and durability of Tyvek® material, making it the preferred protective suit in a wide range of industries, including:Remediation companiesIndustrial cleaning and maintenanceFood processing: Proven and reliable protection against infectious agentsChemical industry: Protection against hazardous particles and liquidsAutomotive industryPaint shops: Freedom from lint and prevention of craters in painted surfacesPharmaceutical industryNuclear industry: Complies with EN 1073-2 for protective clothing against contamination by radioactive particlesDecontamination and remediation: Reliable and robust protection combined with high wearing comfortOil and gas industry: Antistatic equipment on both sides for use in Ex-zonesModificationsCompared to the TYVEK® Classic you may currently be using, the new TYVEK® 500 Xpert suit offers you the following additional benefits:3x higher protection performance against liquids6x higher protection performance against solid flying particlesOptimized design for even better fit and protection performance, even during body movements Improved hood for a perfect fit during head movements and when wearing respiratorsLarger slider on zipper for easier closing and opening when wearing glovesCleanroom class ISO 7-9 / GMP C/DChemical protective clothingType 5 - Protection against solid flying particles (Standard: EN ISO 13982-1)NEW Type 6 - Limited protection against liquid mist (New test method: EN ISO-17491-4 Method A)Electrostatic dissipation with correct grounding (Standard: EN 1149-5: 2008)NEW Class 2 - Protection against contamination by radioactive particles (Standard: EN 1073-2:2002)NEW Biological protection (Standard: EN 14126:2003)PackagingIndividually packed 25 pieces in a bag 4 bags in a carton (100 pieces)
Overall Kimtech A5 without Hood
The Kimtech A5 sterile disposable coverall offers the reliable full-body protection and comfort required in cleanroom environments. From the binding seams and elasticated drawstrings to the batch control during production, the sterile A5 coverall meets the high standards for working in cleanrooms. It is manufactured in an ISO-certified factory, processed under cleanroom conditions and individually packaged. The coverall is free from natural rubber latex. Material & properties Material: SMS made from 100% polypropylene Colour: white Without hood High wearing comfort ISO 5 GMP A/B Textile-like texture Elasticated drawstrings and binding seams Free from natural rubber latex Patent-pending, clearly visible blue clean-don line: the line on the inside of the coverall shows where it can be touched when putting it on, making it easier to avoid touching the outside of the coverall Patent-pending press stud system: the integrated press studs hold the sleeves and legs together so that they do not accidentally touch the floor and release automatically when donning Integrated thumb loop: This prevents the sleeve from rolling up and therefore prevents exposure of the wrist or arm. Innovative left-hand fold: When the packaging is opened, the inside of the coverall is on the outside, which reduces the risk of touching and thus contaminating the outside of the coverall. Triple-packed Packing individually packed 25 pieces in a carton
Coverall SimSafe® SC06-S Sterile
The SimSafe SC06-S coverall is a sterile protective suit with hood made of polyester and polyethylene. It offers high-quality comfort and protection thanks to the innovatively processed bi-component material. The seams are fully taped and the zip at the front has a wide cover. Material & properties Material: 65 % polyethylene bicomponent fibre, 35 % polyester Colour white Sterile ISO 4 GMP A/B PPE CAT III Coverall with hood Thumb loops on cuffs Elasticated hand and foot cuffs and waist Unique clean-sealed technology No adhesives used in the material Fully taped seams Front zip with wide cover flap Excellent protection against cytostatics Antistatic Clean Available sterile and non-sterile Easy handling thanks to easy open bags Vacuum packed IPA-resistant bags 2 year shelf life Packaging individually packed 50 pieces in a carton
Zyto-Sterilset® Pressure Seal Bag
The Zyto-Sterilset® DV is a transport/protective packaging with pressurised closure and the warning: Caution cytostatics. Material & properties Validated sterile product according to standard DIN EN ISO 11179 GMP class B DIN ISO 14644-1 Class 5 Transport packaging with pressure seal As a collection bag for hanging, suitable for stand 3 (art. no. 11002133) As a collection bag for hanging, suitable for stand 7 (item no. 11002134) 20 applications per set, in double Tyvek® packaging for safe insertion into the aseptic area Safety Warning notice "Caution cytostatics "* Safe handling in accordance with GMP in cytostatic preparation Safe internal and external transport Safe use on patients Variable use Small-volume ampoules and syringes, large-volume infusion bags Suitable for use in laminar flow workbench DV pressure closure No welding in the laminar flow workbench Suitable for use in clean rooms Product identification guaranteed by internal declaration, even after discharge High level of security thanks to extra-strong film Visual inspection of contents and declaration (label) possible at any time *Imprint not resistant to solvents - conformity according to FDA Title 21, EU 10/2011 Packaging 20 pieces in a Set (in double Tyvek® packaging for safe insertion) 10 Sets in a Packaging Unit (PU)
Vorpräparations-System PurQuip Prepare
Ein kompaktes, fahrbares Vorpräparations-System aus Edelstahl. PurQuip Prepare besitzt folgende Eigenschaften: Vollständig aus Edelstahl Elektropolierte Premium-Oberflächen Dauerhaft autoklavierbar und desinfektionsmittelbeständig Ultrakompakt und sehr handlich Doppelwannen-Prinzip verhindert Kreuzkontamination Wanne mit Skala zur exakten Flüssigkeitsdosierung Abriebfeste Leichtlaufrollen mit fettfreiem Edelstahl-Gehäuse Konform mit DIN ISO, GMP und VDI 1 Edelstahlwanne für präparierte Mopps 1 Edelstahlwanne für benutzte Mopps 1 Dosiersieb 1 Moppauflage Für bis zu 10 vorpräparierte Mopps Vollständig zerlegbar Einfache Tränkung durch Übergießen Besonders für kleine und beengte Reinraum-Bereiche Reinraumklasse ISO 4-6 / GMP A/B (empfohlen) Maße (LxBxH): 330x530x330 mm Gewicht: 7,5 kg Die Mopp-Präparation Die Vorpräparation ist eine fortschrittliche Methode zur Feuchtigkeitsdosierung von Reinraum-Mopps. Das "herkömmliche" Auspressen in einer Flachpresse entfällt dabei. Und so funktioniert es: 1 Vor Beginn des Wischvorgangs wird die benötigte Moppmenge gewählt und in den dafür konzipierten Moppbehälter (Wanne 1) gelegt. 2 Nun wird die dafür benötigte Flüssigkeitsmenge im skalierten Flüssigkeitsbehälter (Wanne 2) angesetzt. 3 Die frische Flüssigkeit wird über ein Dosiersieb auf die Mopps verteilt. Eine gleichmäßige Befeuchtung aller Mopps wird bereits nach wenigen Minuten erreicht. 4 Die präparierten Mopps können nun einzeln aus dem Moppbehälter (Wanne 1) entnommen werden. Eine speziell geformte Moppauflage vereinfacht die Aufnahme ohne Handkontakt. 5 Nach erfolgtem Wischvorgang werden die gebrauchten Mopps in den nun leeren Flüssigkeitsbehälter (Wanne 2) abgeworfen. Durch die Trennung der frischen und gebrauchten Mopps werden Kreuzkontaminationen vermieden.
Cleanroom Coat - Long
The reusable cleanroom long gown is made from a state-of-the-art cleanroom fabric. Material & properties Material: polyester + carbon Cuffs on the arms Press studs on collar 2-way zip No pockets Colour: White Fabric Warp (polyester filament yarn): 75d Weft (polyester texturised yarn): 100d Conductive yarn, on warp and weft: 20d Weave structure: 3/2 twill Density: 172 x 121 (warp x weft/inch) Weight: 120 g/m² Conductive yarn spacing: 4.5mm x 4.5mm grid Pore size: 20 μm Particle filtration (IES-RP-CC003.2): 99.0% at 0.3 μm 99.4% at 0.5 μm Air permeability (ASTM D 737-1996): 3.1 cc/cm² /sec Water vapour permeability (ASTM E 96-2000): 11.047 g/m² /24h Tensile strength (ASTM D 5304): Warp: 96.4 kg Weft: 83.0 kg Tear strength (ASTM D 2261-1996): Warp: 2.2 kg Weft: 2.1 kg Abrasion resistance (ASTM D 3886-99): 266 Cleanroom class (recommended): ISO 4-5 Friction-related static charge (JIS L 1094-1997): Below 10 V Drop time to 10% of 5,000V: 0.01 sec Surface resistance (ASTM D257): 5.9 x 107 Ω/m² Particle formation released per litre: 4 at 0.3 μm 3 at 0.5 μm Sterilisation compatibility: steam autoclave, gamma radiation, beta radiation, ETO Packaging individually packed
Full Protection Goggles BioClean Clearview BCAG
The autoclavable Cleanroom Full Protection Goggles BioClean Clearview BCAG have a super soft frame made of thermoplastic rubber with an indirect ventilation system that provides high wearing comfort and reduces the risk of contaminants entering the controlled. These safety glasses ensure a clear view through hardened, scratch-resistant polycarbonate lenses. Material & Properties Material: Thermoplastic rubber Width: 190 mm Height: 85 mm Depth: 85 mm Glass thickness: 3,1 mm Colour: white ISO 4 GMP A CAT II Autoclavable Super soft frame Indirect ventilation through openings at top and bottom Toughened, scratch-resistant and optically correct polycarbonate glass Lint- and latex-free headband Tested to withstand > 40 autoclave cycles of 30 minutes at 121°C Anti-fog performance is maintained (under laboratory conditions) for up to 25 cycles without degradation. Can be worn over corrective spectacles Packaging 1 piece in a sealed PE bag (must be removed before autoclaving) 12 PE bags in an carton
Nitrile Cleanroom Glove BioClean N-Plus
The extended version (400 mm) of the BioClean N-Plus nitrile glove protects against a variety of chemicals. Its anatomical fit supports wearing over a longer period of time.The BioClean N-Plus glove is suitable for ISO cleanroom class 4 and offers maximum barrier integrity with a low AQL value of 0.65. Material & Properties Material: Nitrile Length: 400 mm Colour: white Cat III ISO 4 GMP A/B Sterile AQL 0,65 Suitable for cytostatic drugs Anatomical fit Protection against a wide range of chemicals Elbow protection Powder and latex free No particle release EasyTear packaging Standards and Certificates ASTM D6978 CE 0598 EN 420:2003 + A1:2009 EN 421:2010 EN 455 Part 2 EN ISO 374-1:2016 EN ISO 374-5:2016 Food contact Packaging 1 pair double packed 10 pairs in an outer bag 20 outer bags in a carton (200 pairs)
Cytostatic Arm Cuff BioClean-C S-BCSC
The BioClean-C Sterile Arm Sleeves S-BCSC have been specially developed for protection against a range of cytostatic agents. They are compatible with ISO Class 4 cleanrooms. Made from lightweight, low-lint CleanTough blue material, the sleeve covers have elasticated arms for stability on the arm and are designed for quick and easy donning. Material & Features CleanTough & 100% polyester cuffs Colour: Blue Length: 400mm Ultrasonically welded seams (covered with protective tape) PPE Cat III type PB [6] Low particle emission ISO class 4 GMP A/B Gamma irradiated Silicone free Packaging 1 Bag with 15 Pairs 6 Bags in Carton 90 Pairs in Carton
Polychloroprene Glove BioClean Fusion
The BioClean Fusion (manufacturer code: S-BFAP) from Ansell is a sterile cleanroom disposable glove made of polychloroprene with excellent antistatic properties. It can be worn twice, is easy to put on and offers exceptional tactile sensitivity. Product features: Colour: Green Length: approx. 290 mm ± 10 mm Material: Polychloroprene Shape: Wearable on both sides Surface: Textured Powder-free, latex-free, cuff with rolled edge Double wearable Sterile (sterilisation method: gamma irradiation) AQL: 0.65 Protein level: - (polychloroprene does not contain natural latex proteins) Physical properties: Meets the requirements of the glove standard EN 420:2003, the European standard for medical gloves EN 455 (parts 1, 2 & 3) Recommendation: ISO class 4 & GMP A Classification: Category 1
Reusable Hood
The reusable bonnet has press studs for attaching the face mask. Material & properties Material: 98 % polyester / 2 % carbon Colour: white or blue Weave structure: 3/2 twill Base weight: 118 g/m² Particle filtration 0.3µm / 0.5 µm ISO 4 EU GMP A - C /US FED Std 10 - 100,000 With press studs at the front 2 press studs for attaching face masks Press studs at the back of the head Pattern: Chequered 5mm * 5mm possible sterilisation methods: Steam autoclave, gamma irradiation Beta irradiation, ETO: steam - gamma Breathability ISO 9237-2:1995: 18.10 l/m² Water impermeability DIN EN ISO 11092:2014 Ret: 2.71 m²Pa/W Tear strength ISO 13934/1:2013: warp 830 N / weft 1500 N Abrasion resistance ISO 12947/2:1998: > 100,000 cycles Decay time EN 1149-3: 0.01 sec Particle retention capacity: 0.3 µm=98%, 0.5 µm=98%, 5.0 µm=98% The reusable garment is made of lightweight micropolyester fabric Maximum washing machine load: 60 % Washing chemicals: anionic / non-ionic, preferably pure anionic agents with good dispersing properties. Maximum pH value: 8 - 8.5. Close the zip and press studs before washing. Pre-wash: Maximum 35°C - 10 minutes Main wash: Maximum 60°C - 15 minutes Cool down 1°C per minute to 50°C to avoid creasing. Rinse ( 2 x ) and neutralise with 1 cc/kg acetic acid 80%, 10 min at 40°C. Last rinse: We recommend an antibacterial and antistatic detergent. Dry gently and slowly. Tumble dry at a maximum of 85°C Application For optimum effectiveness: Try to wear the clothing as closed as possible and try to avoid air holes at the neck. Air formation in the clothing (blow-up effect) must be avoided. Have your cleanroom garments decontaminated and washed in good time to avoid contamination in the cleanroom. Cleanroom garments are not water-repellent and quickly absorb water and chemicals. Small holes and tears should be repaired as quickly as possible (patches). The cleanroom garments should not come into contact with solvents, chemicals, disinfectants and stain removers Maintenance The washing frequency depends on the working environment (microelectronics - pharmaceuticals ...) and the working conditions. The cleanroom garments should be washed in a cleanroom laundry. The maximum washing temperature is 60°C - Do not iron! The addition of chlorine is prohibited in the washing process. Thorough rinsing and neutralisation. A pH value between 5.5 and 6 should be achieved. If dry cleaning is necessary: only with perchloroethylene. A low speed is recommended for tumble drying. Maximum shrinkage: less than 3 % Packaging 1 piece
Disposable Coverall BioClean-D BDCCT
The Coverall BioClean-D BDCCT with collar, has a front zip with protective flap, an elasticated back, cuffs and ankles as well as thumb loops for a secure fit. The anti-static, lightweight, low-lint CleanTough material offers comfort and protection against a range of chemicals. Material & properties Material: polyethylene / polypropylene laminate fleece Colour: white ISO 4 CAT III Suitable for cytostatics Antistatic, lightweight, low-lint CleanTough material Thumb loops for a secure fit Zip with reclosable protective cover Elasticated back and arm/leg cuffs Quality systems: Manufactured in an ISO 9001:2008 certified facility Packaging double packed 1 piece in a bag 20 bags in a carton (20 pieces)
Reusable Overshoes - High
Cleanroom overshoes (reusable overshoes) made of state of the art cleanroom fabric. High design with a firm non-slip rubber sole. Material & Properties Material: 98% Polyester / 2% Carbon ISO 4 - 8 EU GMP A - C /US FED Std 10 - 100,000 Weight: 118 g/m² Type of antistatic yarn: Negastat P210 Fabric: Twill 3/2 Pattern: Plaid 5mm * 5mm 2 colored straps with 2-piece buckle on front foot over instep, Different colors per size. Combi P sole: TPU sole, gamma and ETO resistant. Excellent slip resistance. Very high slip resistance. With reinforced border from sole end to fabric. Press studs and rubber at the top of the boot shaft Fabric name: Alsistrong Usage: clean room Sterilization: Steam - Gamma Breathability ISO 9237-2:1995: 18.10 l/m².s Water tightness DIN EN ISO 11092:2014 Ret: 2,71 m²Pa/W Tear strength ISO 13934/1:2013: warp 830 N / weft 1500 N Abrasion resistance ISO 12947/2:1998: > 100,000 cycles Decay time EN 1149-3: 0.01 sec Surface resistance EN 1149-1: 10 exp6 Ohm Particle retention: 0.3 µm = 98%, 0.5 µm = 98%, 5.0 µm = 98% The reusable garment is made of lightweight micropolyester fabric.1. maximum washing machine load : 60 %.2. washing chemicals: anionic / non-ionic, preferably pure anionic agents with good dispersing properties.3. maximum pH: 8 - 8.5. close zipper and push buttons before washing.4. prewash: maximum 35°C - 10 minutes5. main wash: maximum 60°C - 15 minutes6. cool down 1°C per minute up to 50°C to avoid wrinkles7. rinse ( 2 x ) and neutralize with 1 cc/kg acetic acid 80%, 10 min at 40°C.8. last rinse: we recommend an antibacterial and antistatic detergent.9. dry gently and slowly.10. Tumble dry at a maximum temperature of 85°C. Application For optimal effectiveness: try to wear clothes as closed as possible and try to avoid air holes at the neck. Air formation in the clothing (blow-up effect) must be avoided. Have your cleanroom clothing decontaminated and washed in time to avoid contamination in the cleanroom. Cleanroom clothing is not water repellent and quickly absorbs water and chemicals. Small holes and tears should be repaired (patched) as soon as possible. Cleanroom clothing should not come into contact with solvents, chemicals, disinfectants and stain removers Maintenace The washing frequency depends on the working environment (microelectronics - pharmaceutical ...) and working conditions. The cleanroom garments should be washed in a cleanroom laundry. The maximum washing temperature is 60°C - Do not iron! The addition of chlorine is prohibited in the washing process. A thorough rinsing and neutralization. A PH- value between 5.5 and 6 should be achieved. If dry cleaning is required: only with perchloroethylene. When drying in a dryer, a low speed is recommended. Maximum shrinkage: less than 3%. Packaging 1 pair
Disinfectant InSpec DE
Alternatives Disinfectant ClearKlens DE | 0.9 litre spray bottle Disinfectant ClearKlens DE | 5 litre canister InSpec DE is a sterile, ready-to-use disinfectant consisting of a 70% alcohol solution (denatured ethanol) and 30% ultrapure water WFI quality (USP), which was developed for biopharmaceutical and medical device cleanrooms. The product can be used for wiping down equipment, hard surfaces (floors, walls and ceilings) and spraying gloved hands. It is manufactured to GMP standards in an ISO 6 cleanroom. The product is filled and capped under an ISO Class 5 laminar flow. The solution is filtered through a 0.2 µm filter and gamma irradiated after a vaildated process at 25 kGy to provide a guaranteed sterility level SAL of 10-6. Material & Properties Solution: 70% denatured ethanol and 30% ultrapure water Double packaged Low residue Fast action Bactericidal and fungicidal (fungicidal) Irradiation mark Manufactured in accordance with GMP Meets the standards EN 1276 (bacteria), EN 1650 (yeasts and moulds) and EN 13697 (surface test for bacteria, yeasts and moulds) Packaging Bottle with 500 ml 8 bottles in a carton
Disinfectant ClearKlens Bi-Spore RTU
The ClearKlens Bi-Spore RTU VH26S is a two-component system for generating a solution with 250 ppm chlorine dioxide. It consists of a base solution and an activator. ClearKlens Bi-Spore RTU is suitable for disinfecting surfaces and equipment in the particularly critical sterile areas of the pharmaceutical and medical industries. ClearKlens Bi-Spore RTU is supplied as a ready-to-use package consisting of 4.9 litres of basic WFI solution and 100ml of activator. Material & Properties Active ingredient: 50ppm chlorine dioxide / WFI water clear, colourless liquid GMP A/B Production takes place in compliance with GMP guidelines (Good Manufacturing Practices) in an ISO class 7 environment, filling is carried out in clean room class ISO 5 0.2 µm filtered Aseptically filled ClearKlens Bi-Spore RTU is supplied as a ready-to-use package consisting of 4.9 litres of basic WFI solution (water for injection) and 100 ml of activator Very good sporocidal effect after just 5 minutes exposure time (in accordance with DIN EN 13704) Broad spectrum of effectiveness Detex label for proof of irradiation Base and activator are each double-packed to simplify transport to the cleanroom Suitable for wipe and mop application Packaging double packed 4 canisters in one carton
Nitrile Cleanroom Glove Kimtech Pure G3 Sterile Sterling
The sterile "Cleanroom Glove G3 Sterling" is a PPE Category III certified cleanroom glove for a variety of demanding applications. The gloves are hand-specific and made from sterile nitrile, resulting in better contamination control that fulfils a range of stringent regulatory conditions. The non-powdered gloves offer a comfortable fit that is suitable for double donning. Material & Features Material: Synthetic nitrile polymer (acyrilonitrile-butadiene) Length approx. 300 mm Thickness Middle finger: 0.10 mm Palm: 0.08 mm Cuff: 0.07 mm Colour: grey ISO 3 GMP A KAT III Static dissipative behaviour in use Secure grip when handling objects improved, consistent grip Excellent dexterity and tactile sensitivity Powder-free Low endotoxin content (<20 endotoxin units/pair) Latex-free Cuff with rolled edge Fully texturised Hand specific Packaged in polythene bags and pouches for use in cleanrooms Packaged for donning under aseptic conditions Packaging individually wrapped 30 pairs in one bag 10 bags in a box (300 pairs)
BioClean MTA Face Mask
The disposable face mask MTA is manufactured from suitable materials for use in cleanrooms. Thanks to its high bacterial and particle filtration efficiency, it reduces contamination of controlled environments. The straps ensure that the mask fits securely. Material & properties Material: Polypropylene / polyethylene Length: 210 ± 5 mm Width: 95 ± 5 mm Colour: white Sterile ISO 4 GMP A with tapes High bacterial and particle filtration efficiency Completely internal noseband Ultrasonically welded seams Latex-free Packaging individually packed 1 piece per sealed PE inner bag 50 inner bags per sealed PE outer bag 10 outer bags in a carton (500 pieces)
Cytostatic Arm Sleeve BioClean-C BCSC
The BioClean-C Sterile Arm Sleeves S-BCSC have been specially developed for protection against a range of cytostatic agents. They are compatible with ISO class 4 cleanrooms. Made from lightweight, low-lint CleanTough blue material, the sleeve covers have elasticated arms for stability on the arm and are designed for quick and easy donning. Material & Features: CleanTough & 100% polyester cuffs Colour: Blue Length: 400mm Ultrasonically welded seams (covered with protective tape) PPE Cat III type PB [6] Low particle emission ISO class 4 Silicone free Packaging: 1 bag with 15 pairs 6 bags in a carton 90 pairs in a box
Cytostatic Protective Apron BioClean-C BCDA
The BioClean-C cytostatic protective apron is made from a lightweight, low-lint blue CleanTough material. The adjustable neck fastening and drawstrings on the back ensure easy donning and a comfortable fit. Material & Features Material: CleanTough Colour: blue Dimensions: Size: S: Chest circumference: 84-92 cm (33"-36"), Size: 164-170 cm (5'4"-5'6") Size: M: Chest circumference: 92-100 cm (36"-39"), size: 170-176 cm (5'6"-5'9") Size: L: Chest circumference: 100-108 cm (39"-42"), size: 176-182 cm (5'9"-6'0") Ultrasonically bonded seams with protective tape Tested against the ASTM F739-12 permeation standard Drawstrings at the back Adjustable neck closure Packaging 1 piece per sealed PE inner bag 1 inner bag per sealed PE outer bag 50 PE outer bags per box (50 pieces)
Stainless Steel Tripod 7
"Tripod 7" is suitable for Zyto-Sterilset® DV 330 SET OF 3 PRODUCTS; (bag DV 330 is NOT INCLUDED! = Scope of delivery: stand, tray + lid) Safety bowl, steam sterilisable 121°CTransparent lid with handle, heat resistant up to 70°C Material & properties Material: stainless steel V2A Suitable for laminar flow workbench IP disinfection Suitable sterilisation methods: EO, ɣ 25 kGy, steam Smooth surface without welds, holes or screws Safety Safe loading and unloading due to 3-sided operation High stability Safety tray, sterilisable Transparent cover with handle
Disinfectant ClearKlens DE
ClearKlens DE VH29 is a disinfectant for use in cleanrooms in the pharmaceutical and medical manufacturing industry. It is based on 70% alcohol and 10 ppm Bitrex. ClearKlens DE VH29 is 0.2µm filtered, irradiated and double packaged and is supplied as a 900ml ready to use solution.The bottle in which ClearKlens DE VH29 is supplied has no back suction due to a special device which protects the contents of the bottle against contamination during use of the product. Material & Properties Active ingredient: 70% ethanol / 30% WFI water plus 10ppm Bitrex Clear, colourless liquid GMP A/B Ready to use for the disinfection of work surfaces and equipment in cleanrooms 0.2 µm filtered Sterile Gamma-irradiated (900 ml spray bottle) or sterile filtered (5 litre canister) Sterility test in accordance with the European Pharmacopoeia Provided with a physical-chemical analysis and irradiation certificate (Detex) Odourless No discolouration Low toxicity Wide range of applications Double-packed for easy transport to cleanrooms Packaging 1 bottle double packed 6 bottles in one carton
Desinfectant Cleaner ClearKlens Cleansinald SC
Sterile ClearKlens Cleansinald SC VH9 is a concentrated, surface-active, cleaning disinfectant/concentrate from Diversey for use in clean rooms in the pharmaceutical and medical industries, based on alkylamine and quaternary ammonium compounds. It can be used on all common materials in these areas, provided the instructions for use are followed. If in doubt, it is advisable to test the compatibility with specific materials before long-term use. The disinfectant has been comprehensively tested in accordance with DIN EN 1040, EN 1276 and EN 1650. Material & Properties Based on alkylamines and quaternary ammonium compounds (QAC) ISO 5 GMP A/B Suitable for disinfecting walls, floors, ceilings and equipment in the pharmaceutical and medical manufacturing industry 0.2 µm filtered Aseptically filled Double packaged for easy transport into clean rooms Supplied in 25 ml single doses Low toxicity Broad spectrum of activity Suitable for spraying, wiping and mopping applications. No rinsing required for non-product contact surfaces Smaller items or removed equipment parts can be immersed in ClearKlens Cleansinald SC solution Packaging 5 pieces individually packaged in an outer bag 10 outer bags in a carton (50 pieces)
Cytostatic Protective Apron BioClean-C S-BCDA
The BioClean-C S-BCDA cytostatic protective apron is made from a lightweight, low-linting blue CleanTough material. The adjustable neck fastening and drawstrings on the back ensure easy donning and a comfortable fit. Material & Features Material: Polyethylene / polypropylene laminate fleece ISO 4 GMP A Sterile Suitable for cytostatics Colour: Blue Adjustable neck fastening Drawstrings at the waist Material: Lightweight, low-lint & durable CleanTough fabric Ultrasonically bonded seams with protective tape Packaging 1 piece per sealed PE inner bag 1 inner bag per sealed PE outer bag 50 PE outer bags in a box (50 pieces)
Disposable Coverall BioClean-D BDCHT
The disposable coverall BioClean-D, BDCHT is a disposable protective garment with a front zip with protective cover, elasticated back, hood, back and arm/leg cuffs and thumb loops for a secure fit. The anti-static, lightweight and low-lint CleanTough material offers comfort and protection against a wide range of chemicals. Material & properties Material: Polyethylene/polypropylene laminate fleece Fabric: CleanTough Colour: White Front zip with cover Elasticated hood, back, arm and leg cuffs Thumb loops on the wrist for easy donning Pouch print: IPA-resistant ink ensures that the pouches can be wiped clean with cleaning or sterilisation fluids without fear of cross-contamination Quality systems: Manufactured in an ISO 9001:2008 certified facility ISO Class 4 CAT. III Packaging 1 piece per sealed PE inner bag 1 inner bag per sealed PE outer bag 20 outer bags per outer box (20 pieces) Note for sizes XXXL, XXXXL, 5XL, 6XL and 7XL: 15 pieces per outer box.
Nitrile Cleanroom Glove BioClean Emerald BENS
The sterile BioClean Emerald Cleanroom Glove made of nitrile protects against a wide range of chemicals and is ideal for double gloving. It is free from accelerator chemicals and is latex-free to prevent latex allergies. The anatomical fit ensures comfort, prevents hand fatigue and allows good dexterity. Material & properties Material: Nitrile Length: 300 mm Colour: Green ISO 4 GMP A CAT III Suitable for cytostatics Sterile (sterilisation method: gamma irradiation) Hand specific Textured Powder-free Latex-free Rolled edge AQL: 0.65 Protein level: - (Nitrile contains no natural latex proteins) Hypoallergenic Excellent chemical protection Standards ASTM D6978 CE 0598 EN 420:2003 + A1:2009 EN 421:2010, EN 455 Part 2 EN ISO 374-5:2016, food contact, category III tested for cytostatics according to ASTM 6978-05ASTM 6978-05 Packaging packed in pairs 10 pairs in an outer bag 20 outer bags in a carton (200 pairs)
Disinfectant ClearKlens Bi-Spore
The sterile, sporicidal disinfectant ClearKlens Bi-Spore VH26 is a two-component system from Diversey for producing a solution with 250 ppm chlorine dioxide. It consists of a base and an activator (2x 100 ml). It is suitable for disinfecting surfaces and equipment in the particularly critical sterile areas of the pharmaceutical and medical industries. Product characteristics Manufactured in compliance with GMP guidelines (Good Manufacturing Practices) in an ISO class 5 environment (EU GMP class A) on an ISO class 7 substrate (EU GMP class C) 0.2 µm filtered Aseptically filled Double packaged ClearKlens Bi-Spore consists of 2 x 100 ml bottles. With 4.8 litres of WFI water (Water for Injection), these make an application solution of 5 litres Very good sporocidal effect after just 5 minutes exposure time (in accordance with DIN EN 13704) Broad spectrum of effectiveness Detex label for proof of irradiation Base and activator are each double-packed to simplify transport to the cleanroom Suitable for wipe and mop application Standards and guidelines: Cleanroom class according to DIN EN 14644-1: ISO 5 / EU-GMP A/B European Biocide Directive 98/8/CE DIN EN 1276, DIN EN 13697 (bactericidal) DIN EN 1650 (fungicidal), DIN EN 13697 (fungicidal: levorucidal effect) DIN EN 14476 (poliovirus and adenovirus) Virucidal: Avian influenza H3N8 How to use ClearKlens Bi-Spore is suitable for wiping and mop application. add 100 ml ClearKlens Bi-Spore-Activ to 4.8 litres of water. Then immediately add 100 ml ClearKlens Bi-Spore Base. Allow to stand for 2 minutes before use. Use the solution within 24 hours. Technical data Appearance: Clear, colourless to light yellow liquid pH value: 2.5 - 5.0 Density (20°C): 1.0 - 1.01 g/cm3 Total potential CIO2 content: 230 - 280 ppm Packaging 2 pieces with 100ml in a bag 25 bags in a carton
Overall Tyvek® 500 Industry
The Tyvek® 500 Industry (model CCF5) (formerly Tyvek® Industry) is a disposable coverall with collar for work in cleanrooms such as the pharmaceutical industry that require protection against human contamination. The coverall belongs to category III, type 5/6 chemical protective clothing. The internal seams reduce the risk of contamination through the suit. Material & Properties Material: Tyvek 500 Design: Suit with collar and elasticated cuffs Tyvek® zip with cover Internal seams Colour: white Base weight: 41.5 g/m2 ISO 7 GMP C/D CAT III Suitable for cytostatics Protection against numerous inorganic chemicals in low concentrations Protection against contamination by radioactive particles (but no protection against radioactive radiation) Contamination protection: helps prevent contamination of the working environment by skin and germs Contains no halogen compounds and can therefore be disposed of without any further residues that are hazardous to the environment or health Suit can be sterilised Standards and level of protection PPE category III Type 5 according to EN 13982-1:2004: Protection against solid, flying particles Type 6 according to EN 13034:2005: Limited protection against liquid mist EN 1149-1:1995 (and EN 1149:2006 with EN 1149-5:2008): Electrostatic discharge Electrostatic discharge with correct earthing (functionality is only given at a humidity of more than 25%) EN 1073-2: Protection against contamination by radioactive particles Packaging individually packed 25 pieces in an outer bag 4 outer bags in a box (100 pieces)
Overboot BioClean-D S-BDOB-L
The disposable BioClean-D S-BDOB-L provides exceptional comfort and protection. Longer (height 500 mm) overboots are made of anti-static, low-linting CleanTough material and feature a non-slip sole and easy lace-up closures at the top and ankle. Material & Properties Material: Antistatic BioClean-D CleanTough white material & polyurethane sole Length: 500mm Colour: White Sterile PPE Category III, Type PB [6] Antistatic according to EN 1149-5 Silicone-free Construction: Tied seams with single-needle stitching Classification: PPE Cat. 3 Type PB[6] Antistatic according to EN 1149-5* & low particulating ISO class 4 Low linting Lace fastenings on top and ankle Non-slip sole Silicone-free Quality standards Manufactured in a factory with ISO 9001:2015 and (EU)2016/425 Module D certifications Complies with Category 3 - Personal Protective Equipment Regulation (EU)2016/425 Tested according to standard EN ISO 13034:2005+A1:2009 Protective clothing against liquid chemicals (type PB[6]) Tested according to standard EN ISO 14325 Protective clothing against chemicals Tested according to standards: EN 1149-5:2008*, Protective clothing -. electrostatic properties; EN 530, abrasion resistance; EN 7854, flex tear resistance; EN 6530, resistance to liquid penetration; EN 13934-1, tensile strength; EN 9073-4, trapezoidal strength; EN 863, puncture resistance; and EN 13935-2, seam strength Tested according to permeation standard ASTM F739-12 Processed in a NEBB-certified ISO Class 4 environment Particle Shedding (Helmke Drum Test) <260 Category I Packaging 30 pieces/sealed PE inner bag 1 PE inner bag/sealed PE outer bag 5 PE outer bags (150 pieces)/outer carton
Systembox EasyMop CR
Die EasyMop CR Systembox wurde als geschlossenes System zur Vorpräparation von Moppbezügen entwickelt. Durch ihre Form ermöglicht sie das berührungsfreie Aufnehmen des Moppbezuges - Kontakt mit Reinigungs- und Desinfektionsmitteln sowie die Gefahr der Kreuzkontamination werden konsequent vermieden. Die Vorpräparation der Moppbezüge mit der EasyMop-Systembox kann auf 3 Arten erfolgen: manuell durch Übergießen: Es werden 6 Moppbezüge in die Systembox eingelegt, dann folgt das Übergießen mit der zuvor festgelegten Menge an Reinigungsflotte aus einem Messbecher / Eimer. Nach dem Einlegen von weiteren 6 Moppbezügen wird die Systembox geschlossen und gedreht. Nach 5 Minuten sind die Moppbezüge gleichmäßig durchfeuchtet. halbautomatisch mittels Dosieranlage: Anstelle des manuellen Übergießens erfolgt die Zugabe der Reinigungsflotte über eine fix installierte Dosieranlage, die für eine konstante Menge und Konzentration der Reinigungsflotte sorgt. vollautomatisch in der Waschmaschine: Die Moppbezüge werden bereits in der Waschmaschine im letzten Spülgang mit der Reinigungsflotte getränkt und auf den gewünschten Feuchtigkeitsgrad abgeschleudert. Sie können gebrauchsfertig entnommen werden. Dies ist nur mit spezieller Waschmaschinentechnik möglich. Egal für welche Variante Sie sich entscheiden - mit EasyMop sind Sie immer auf der sicheren Seite. Die Systembox EasyMop CR ermöglicht die Einhaltung aller einschlägigen Vorschriften zur Reinigung und Dekontamination von Reinräumen und bietet enorme anwendungstechnische Vorteile. Sämtliche Baugruppen sind für den Einsatz in Reinräumen geeignet. Sämtliche Maße sind exakt auf den Einsatzzweck abgestimmt. Das MopJump-System ermöglicht eine gleichmäßige Vorpräparation der Moppbezüge sowie deren berührungsfreie Aufnahme. Die Auslegung des Schließmechanismus sorgt für eine leichte Handhabung. Die fünf erhältlichen Farben ermöglichen die sichere Einrichtung eines Zonenkonzepts. Inklusive Deckel und Dichtung Material: Polypropylen Mit 12 Moppbezügen befüllbar