Das "Desinfektionsmittel CyChlor" FBT100CC ist ein neues Desinfektionsmittel mit breitem Wirkungsspektrum für die tägliche Verwendung. Contec CyChlor ist eine patentierte Mischung aus Hypochlorsäure und destilliertem Wasser, die gebrauchsfertig geliefert wird und in 3 Minuten gegen Bakterien und Hefen wirksam ist. Das Produkt wird in einer Umgebung Klasse A auf 0,2 Mikrometer filtriert und abgefüllt. Das sterile Produkt wird dann in vorbestrahlte Komponenten abgefüllt. Das Produkt ist doppelt verpackt und kann einfach in pharmazeutischen Reinräumen genutzt werden. Es wird entweder als Zerstäuberflasche für kleine Bereiche oder als 5 l-Behälter mit Deckel geliefert, wenn größere Mengen benötigt werden. Material & Eigenschaften Wirkstoff: 600ppm hypochlorige Säure in gereinigtem Wasser ISO 5 GMP C/D Gebrauchsfertig mit 2 Jahren Haltbarkeitsdauer Doppelt verpackt in linearen Polyethylen-Aufreißbeuteln Triggerspray mit Jet- oder Sprühoption Nicht als korrosiv eingestuft Breitbandwirkung in 3 Minuten spart Zeit bei der Biodekontaminierung auf 0,2 Mikrometer filtriert und in einer Umgebung der Klasse A abgefüllt, um zu gewährleisten, dass das Produkt frei von Kontaminierungen und Partikeln ist für die Verwendung in Reinräumen der Klassen A und B geeignet enthält keine quartären Ammoniumverbindungen und keine Tenside und hinterlässt dadurch wenig Rückstände, was Zeit bei deren Entfernung spart nicht als Gefahrstoff klassifiziert, weshalb eine einfache persönliche Schutzausrüstung ausreicht und keine besondere Entsorgung erforderlich ist Zerstäuberflasche besitzt eine Strahl- und eine Zerstäuberoption – eine große Tröpfchengröße verringert das Risiko des Einatmens und bietet gute Flächenabdeckung Verpackung 6 Flaschen in einem Karton

The sterile disinfectant CyChlor SBC500CC is a new disinfectant with a broad spectrum of activity for daily use. Contec CyChlor is a patented mixture of hypochlorous acid and distilled water that is supplied ready to use and is effective against bacteria and yeasts in 3 minutes. The product is filtered to 0.2 microns in a class A environment and bottled. The sterile product is then filled into pre-irradiated components. The product is double packaged and can be easily used in pharmaceutical cleanrooms. It is supplied either as a nebuliser bottle for small areas or as a 5 l container with lid if larger quantities are required. Material & Properties Active ingredient: 600ppm hypochlorous acid in purified water ISO 5 GMP A/B Sterile version aseptically filled in pre-irradiated containers Ready to use with 2 year shelf life Double packed in linear polyethylene tear-off bags Trigger spray with jet or spray option or 5L sealable container for larger quantities Not classified as corrosive Broad spectrum action in 3 minutes saves time on bio-decontamination filtered to 0.2 microns and bottled in a Class A environment to ensure the product is free from contamination and particulates suitable for use in class A and B cleanrooms contains no quaternary ammonium compounds and no surfactants and therefore leaves little residue, saving time when removing them not classified as a hazardous substance, so simple personal protective equipment is sufficient and no special disposal is required Atomiser bottle has a jet and an atomiser option - large droplet size reduces the risk of inhalation and provides good area coverage Packaging 2 Canister in a Carton

The disinfectant ClearKlens IPA VH1 is a solution of 70 % isopropyl alcohol and 30 % water for injection (USP quality). ClearKlens IPA is a ready-to-use product for the disinfection of work surfaces and process equipment in cleanrooms. ClearKlens IPA is an innovative pouch system that prevents product contamination during application (no suck-back). The material components used are easily recyclable. Filled under class A laminar flow in particle-free pouches - complete control of sterility (microorganisms, endotoxins, particles). ClearKlens IPA is a BPR-supported packaging and formulation Material & Properties Active ingredient: 70% isopropyl alcohol ClearKlens IPA Non Sterile is fast-acting and suitable for use between coats and for final disinfection. ClearKlens IPA Non Sterile is safe to use on food contact surfaces and evaporates quickly, leaving no residue. ClearKlens IPA Non Sterile can also be used during shift changes to maintain a good standard of hygiene for the next production run. ClearKlens IPA Non Sterile has a broad spectrum of activity and is effective against most types of micro-organisms. 0.2 μm filtered Ready to use (no dilution required) Broad spectrum of activity No foam development Suitable for use in moisture-sensitive environments Evaporates quickly and leaves no residue Packaging 5 litres in a canister 2 canisters in a carton

The sterile ClearKlens IPA VH1 is an alcohol-based surface disinfectant. A sterile, ready-to-use disinfectant from Diversey with a broad spectrum of activity for cleanrooms in the pharmaceutical industry based on 70% isopropanol and 30% WFI (Water for Injection) water. The product is produced in facilities certified to ISO 9001 and ISO 14001 (Class A / B). ClearKlens IPA has been extensively tested in the suspension test according to EN 1276 and EN 1650 as well as in the surface test according to EN 13697. These showed that it has a broad spectrum of activity against both Gram-positive and Gram-negative bacteria, yeasts and fungi. Material & Properties Clear liquid free of insoluble particles Ready-to-use for the disinfection of work surfaces and processing equipment in cleanrooms Solution of 70% isopropanol and 30% WFI water 0.2 µm filtered Sterile ISO 5 | GMP A/B Gamma-irradiated Provided with a physico-chemical analysis and irradiation certificate (Detex) Odourless Technical Data pH value: 6.0 - 9.0 Density (20°C): 0.865 - 0.85 Alcohol content: 70% +/- 1% w/w Packaging double packed 10 bottles in a carton

Sterile IPA from Contec is a mixture of 70% v/v isopropanol with 30% water for injection or distilled water. The alcohol mixture is filtered to 0.2 micron in a class C clean room (ISO class 7) and filled into bags. This clean manufacturing process in combination with the use of water for injection or distilled water guarantees that the alcohol mixture has an endotoxin content of less than 0.25 endotoxin units/ml. Contec Sterile IPA have been gamma irradiated with at least 25 kGy in a validated procedure and thus sterilised. Supplied in 0.5 litre or 1 litre nebuliser bottles equipped with a protection system that maintains sterility during use, or in 5 litre containers with lids for larger areas. The 5 litre product is mixed with distilled water, while the product in the nebuliser bottle is mixed with water for injection. Material & properties Active ingredient: 70% isopropanol ISO 5 GMP A/B guaranteed endotoxin content of < 0.25 EU/ml and therefore ideal for areas in contact with the product manufactured according to GMP (Good Manufacturing Practice) under class A laminar flow in a class C cleanroom to ensure that alcohol, containers and packaging are free from contamination and particles Atomiser bottle and bag-in-bottle protection system prevent bottle contents from becoming contaminated during use Bottles can be emptied completely, so no product is wasted or has to be disposed of during the shelf life Atomiser bottle has a jet and atomiser option - large droplet size reduces the risk of inhalation and provides good area coverage double/triple wrapped with long-side opening so that the bag can be opened easily even when wearing gloves sterile due to gamma irradiation Packaging 1 bottle double packed 8 bottles in one carton

Inspec QT pre-preparation pouch. A sterile, pre-diluted disinfectant wipe (minimum 2% quats formulation) mixed with WFI-grade water. Contains liquid disinfectant, chelating agents and surfactants. For hard cleanroom work surfaces. 100 ml contains at least 2% w/w disinfectant formulation and 98 ml water. Instructions for use Press the liquid side of the pouch to moisten the wipes with the disinfectant. Wait 5 minutes. Tear off the wipe end of the pouch and cut along the dotted line; then remove wipes as needed. Moisten the entire surface and allow to act for the appropriate amount of time. See technical documentation. Active ingredients Didecyldimethylammonium chloride 1.4g/kg minimum. Microbiological efficacy (min. contact) EN 1276 Bacteria 5 min. EN 13697 Bacteria 5 min. EN 13697 Fungi 15 min. EN 1650 Fungi 15 min. 2-year shelf life Packaging 15 wipes in pre-packaged bag 20 bags in carton

Dieser Polyester-Mikrofasermopp mit Vliesmedium bietet eine hervorragende Saugfähigkeit und ist für die Reinigung mit Desinfektionsmitteln auf horizontalen und vertikalen Oberflächen konzipiert. Er eignet sich ideal für die allgemeine Reinigung und Desinfektion von Decken, Wänden und Böden in kritischen Umgebungen. Das Mikrofasermaterial gleitet sanft über Böden und strukturierte Oberflächen und sorgt für eine hervorragende Entfernung von Verunreinigungen.Vertikale Oberflächen und sind ideal für die allgemeine Reinigung und Desinfektion von Decken, Wänden und Böden in kritischen Umgebungen.Das Mikrofaser Material gleitet sanft über Böden und strukturierten Oberflächen und entfernt hervorragend Verschmutzungen. Material & Eigenschaften Material: Polyester Mikrofaser, Nylon Farbe: Weiß Länge: 398 mm +/- 5 mm Breite: 122 mm +/- 5 mm steril Absorptionskapazität: >305 ml/Mop (>6280 ml/m²) Partikel: IEST-RPcc003.2 Helke Trommeltest <3500 Partikel pro Mopp >0,5 µm Gewicht: 900 g (+/- 0,045) Verpackung 2 Mops in einem Beutel 10 Beutel in einem Karton

Alternatives Disinfectant ClearKlens DE | 0.9 litre spray bottle Disinfectant ClearKlens DE | 5 litre canister InSpec DE is a sterile, ready-to-use disinfectant consisting of a 70% alcohol solution (denatured ethanol) and 30% ultrapure water WFI quality (USP), which was developed for biopharmaceutical and medical device cleanrooms. The product can be used for wiping down equipment, hard surfaces (floors, walls and ceilings) and spraying gloved hands. It is manufactured to GMP standards in an ISO 6 cleanroom. The product is filled and capped under an ISO Class 5 laminar flow. The solution is filtered through a 0.2 µm filter and gamma irradiated after a vaildated process at 25 kGy to provide a guaranteed sterility level SAL of 10-6. Material & Properties Solution: 70% denatured ethanol and 30% ultrapure water Double packaged Low residue Fast action Bactericidal and fungicidal (fungicidal) Irradiation mark Manufactured in accordance with GMP Meets the standards EN 1276 (bacteria), EN 1650 (yeasts and moulds) and EN 13697 (surface test for bacteria, yeasts and moulds) Packaging Bottle with 500 ml 8 bottles in a carton

The InSpec IPA Wipe is a knitted polyester cloth pre-soaked in a 70% alcohol solution in WFI-quality water. Material & Properties Material: Polyester Pre-soaked with a 70% alcohol solution in WFI-quality water Length: 230 mm Width: 230 mm High quality Laser-cut edges Extremely low lint Fast-acting Quick-drying Shelf life: 24 months Packaging 15 wipes in a pouch (200 ml IPA per pouch) 25 pouches in a box

The ClearKlens Bi-Spore RTU VH26S is a two-component system for generating a solution with 250 ppm chlorine dioxide. It consists of a base solution and an activator. ClearKlens Bi-Spore RTU is suitable for disinfecting surfaces and equipment in the particularly critical sterile areas of the pharmaceutical and medical industries. ClearKlens Bi-Spore RTU is supplied as a ready-to-use package consisting of 4.9 litres of basic WFI solution and 100ml of activator. Material & Properties Active ingredient: 50ppm chlorine dioxide / WFI water clear, colourless liquid GMP A/B Production takes place in compliance with GMP guidelines (Good Manufacturing Practices) in an ISO class 7 environment, filling is carried out in clean room class ISO 5 0.2 µm filtered Aseptically filled ClearKlens Bi-Spore RTU is supplied as a ready-to-use package consisting of 4.9 litres of basic WFI solution (water for injection) and 100 ml of activator Very good sporocidal effect after just 5 minutes exposure time (in accordance with DIN EN 13704) Broad spectrum of effectiveness Detex label for proof of irradiation Base and activator are each double-packed to simplify transport to the cleanroom Suitable for wipe and mop application Packaging double packed 4 canisters in one carton

Das sterile denaturierte Ethanol von Contec ist eine Mischung aus 70% v/v denaturiertem Ethanol und 30% Wasser für Injektionszwecke oder gereinigtem Wasser. Das Ethanol von Contec wird nur mit IPA denaturiert, wodurch ein sehr rückstandsarmes Produkt entsteht. Das Alkoholgemisch wird in einem Reinraum der Klasse C (ISO Klasse 7) auf 0,2 Mikron filtriert und in Beutel abgefüllt. Dieses saubere Herstellungsverfahren in Kombination mit der Verwendung von Wasser für Injektionszwecke oder destilliertem Wasser garantiert, dass das Alkoholgemisch einen Endotoxingehalt von weniger als 0,25 Endotoxineinheiten/ml aufweist. Contec steriles denaturiertes Ethanol wurde durch ein validiertes Verfahren mit mindestens 25 kGy gammabestrahlt und so sterilisiert. Die Lieferung erfolgt in Zerstäuberflaschen mit 0,5 l oder 1 l, die mit einem Schutzsystem ausgestattet sind, das die Sterilität während des Gebrauchs aufrechterhält, oder in 5 l-Behältern mit Deckel für größere Bereiche. Das 5 l-Produkt ist mit destilliertem Wasser gemischt, während das Produkt in der Zerstäuberflasche mit Wasser für Injektionszwecke vermischt ist. Material & Eigenschaften Wirkstoff: 70% Denaturiertes Ethanol ISO 5 GMP A/B garantierter Endotoxingehalt von < 0,25 EU/ml und somit ideal geeignet für produktberührende Bereiche gemäß GMP (Good Manufacturing Practice) unter Laminarströmung der Klasse A in einem Reinraum der Klasse C hergestellt, um zu gewährleisten, dass Alkohol, Behälter und Verpackungen frei von Kontaminierungen und Partikeln sind Zerstäuberflasche und „Bag-in-Bottle“-Schutzsystem verhindern, dass der Flascheninhalt während des Gebrauchs kontaminiert wird Flaschen können vollständig geleert werden, wodurch kein Produkt verschwendet wird oder während der Haltbarkeitsdauer entsorgt werden muss Zerstäuberflasche besitzt eine Strahl- und eine Zerstäuberoption – eine große Tröpfchengröße verringert das Risiko des Einatmens und bietet gute Flächenabdeckung doppelt/dreifach verpackt mit längsseitiger Öffnung, damit der Beutel auch mit Handschuhen einfach geöffnet werden kann steril durch Gammabestrahlung Verpackung 1 Flasche doppelt verpack 8 Flaschen in einem Karton

The InSpec N10 is a powerful alkaline cleaning agent for cleanroom walls, floors, ceilings and hard surfaces. It has been specially developed for cleaning permanent adhesive mats. Ready-to-use spray bottle, diluted with WFI water quality. Material & Properties Colour: light yellow Sterile ISO 5 GMP A/BValidated three-month shelf life after opening 2 years shelf life Application The InSpec N10 is designed for cleaning hard surfaces by spraying, wiping by hand and with a mop. Spray at a distance of approx. 15-20 cm. Packaging double packed 6 bottles in a carton

SatPax® 670 combines the benefits of Durx® 670 non-woven wipes (made from a hydroentangled non-woven blend of 55% cellulose and 45% polyester) with deionised water (DI H20) and IPA or ethanol with a European Pharmacopoeia grade. This pre-moistened format provides a more cost-effective and convenient solution compared to the manual moistening of dry wipes, which requires the use of large solvent containers or spray bottles and often results in uneven moistening and cleaning. Sterile versions are available with varying levels (%) of isopropyl alcohol (IPA). Material & properties Material: 55 % cellulose/45 % polyester pre-moistened with 70 % IPA | 30 % DI water with a high degree of saturation of 60 % Length: 230 mm Width: 280 mm ISO: 5 GMP: B Base weight: 68 g/m² Thickness: 264 µm Low number of released substances, fibres and particles Soft and durable with good wet strength Reduces alcohol consumption and preparation/handling costs Reduces VOC emissions Increases cleaning efficiency Increases the consistency of the cleaning protocol Complies with the RoHS Directive and is registered under REACH Packaging 50 wipes in a resealable bag 12 bags in a box (600 wipes)

This unique cleaning, disinfecting and sporicidal agent is ideal for use in cleanrooms. It is fast acting and will not damage stainless steel equipment. PeridoxRTU leaves no film on surfaces and is therefore ideal for use in critical areas.Assured efficacy against hard-to-kill spores and other dangerous pathogens with every cleaning and disinfection.PeridoxRTU provides maximum efficacy without the risk of damage to stainless steeland other sensitive surfaces, as well as staff handling and mixing of bleach.The ready-to-use formula eliminates staff exposure to harsh chemicals and potential concentrate dilution errors. Properties Size: 0,9 l Excellent material compatibility (Large droplet size reduces risk of inhalation and provides good surface coverage) Push-pull closure (Eliminates droplets and reduces risk of inhalation - Can be easily applied to a cloth or cleaning tool) Fast acting ( Kills spores in 3 minutes - Kills bacteria and viruses in 2 minutes) Packaging simple packed bottle 6 bottles in a carton

This alkaline cleaning agent is perfect for the initial deep cleaning when commissioning a new cleanroom. It effectively removes stubborn contaminants prior to disinfection, including visible dirt or residues from previous disinfectant applications. pH12 Ideal for deep cleaning and cleaning heavily protein-based dirt Particularly effective against protein-based and organic residues Removes deposits that neutral or acidic cleaning agents may not be able to remove Low foaming Leaves no significant residue Manufactured from WFI water Manufactured in Class C/D clean rooms Quality management certified to BS EN ISO 9001:2015 Manufactured in accordance with CGMP guidelines Fully traceable with supporting analysis

Das "Inspec AN + Tücher" ist ein steriles Desinfektionswischtuch in einem VorpräparationsbeutelEin vorverdünntes, in Rotation anzuwendendes Desinfektionswischtuch mit Wasser von SFI-Güte gemischt. Flüssiges Desinfektionsmittel, das eine Mischung aus Quats-Desinfektionsmittel, Chelatbildnern und Tensiden enthält. Für harte Reinraumarbeitsflächen. 100 ml enthalten mindestens 2% w/w Desinfektionsformulierung und 98 ml Wasser.In ISO 6 Umgebung hergestellt und in ISO 5 Luftschleuse gefüllt. Das Produkt ist 0,2 Mikrometer gefiltert und ist den gamma sterilisierten Beutel gefüllt wurden. Danach wurde das Produkt versiegelt und doppelt verpackt. Material & Eigenschaften Material Tuch:45% Poly/55% Zellulose Länge: 230 mm Breite: 230 mm Basisgewicht: 68g ISO 5 GMP A/B Steril Vorpräparationsbeutel mit 2 Kammern Quat-frei Z-gefaltet Bis (3-aminopropyl) dodecylpropane-1,3-diamine 1.4g/kg minimum Mikrobiologische Wirksamkeit (Minimum Kontakt) EN 1276 Bacteria 5 Min EN 13697 Bacteria 5 Min EN 13697 Yeast 15 Min EN 1650 Fungi 15 Min 2 Jahre Haltbarkeit Verpackung 15 Tücher in einem Beutel 20 Beutel in einem Karton

The sterile Contec ProChlor is a spore-destroying biocide with a germ reduction of 6 log levels in under 60 seconds (*EN 13704), which is effective against bacteria, fungi, moulds, yeasts, viruses and spores. The sporicide has been specially developed for use in pharmaceutical cleanrooms through filtration and double packaging.Probably the fastest acting sporicide on the market. It is manufactured in a controlled environment and filtered to 2 μm. It is particularly suitable for class C and D cleanrooms where a fast-acting and effective sporicide is required. Contec ProChlor has no hazard classification, good user acceptance and high material compatibility. Material & Properties Material: Hypochlorous acid mixed with distilled water 2000 ppm hypochlorous acid in distilled water Ready to use with a shelf life of two years Filtered to 5 microns. Double packed in linear tear polythene bags. GMP A/B Future productions: 0.2 micron filtered, 24 months shelf life Contec ProChlor is low in residues, but if residues do occur, they can be easily removed with water or alcohol Contains no quaternary ammonium or surfactants - Very little residue, which saves time when removing residues Good suitability for the user as there is no strong odour Personal protective equipment is not required Special disposal is not necessary fast acting - kills spores on a surface in less than 1 minute suitable for cleanrooms - is filtered in a controlled environment and double packaged fully validated - supplied with a test kit to EN standards safe to use - non-harmful, non-corrosive and non-disposable Packaging 6 Bottles in a Carton

The PROSAT® PS-911 ETOH wipe is pre-saturated with 70 % denatured ethanol and 30 % DI water. It is made of hot air-drawn polypropylene and releases the solvent evenly to thoroughly remove surface contamination in critical environments. The wipes are manufactured using the meltblown process to bind the fibres and reduce the number of particles without the use of chemical binders. This special hot air-drawn polypropylene contains very little sodium and other ions. Material & properties Material: Polypropylene Length: 230 mm Width: 280 mm Colour: white Base weight: 36 g/m² ISO 5 impregnated with 70% denatured ethanol / 30% DI water low-lint Packaging 30 wipes in one inner bag 10 inner bags in an outer bag 5 outer bags in a box (1500 wipes)

This unique cleaning, disinfecting and sporicidal agent is ideal for use in cleanrooms. It is fast acting and will not damage stainless steel equipment. PeridoxRTU leaves no film on surfaces and is therefore ideal for use in critical areas.Assured efficacy against hard-to-kill spores and other dangerous pathogens with every cleaning and disinfection.PeridoxRTU provides maximum efficacy without the risk of damage to stainless steeland other sensitive surfaces, as well as staff handling and mixing of bleach.The ready-to-use formula eliminates staff exposure to harsh chemicals and potential concentrate dilution errors. Properties Size: 0,9 l Sterile Excellent material compatibility (Large droplet size reduces risk of inhalation and provides good surface coverage) Push-pull closure (Eliminates droplets and reduces risk of inhalation - Can be easily applied to a cloth or cleaning tool) Fast acting ( Kills spores in 3 minutes - Kills bacteria and viruses in 2 minutes) Packaging Double packed bottle 6 bottles in a carton

Alternatives Contec HydroPure | 1 litre spray bottle Contec HydroPure | 5 litre canister Disinfectant ClearKlens Bi-Spore RTU | 5 litre canister InSpec OX is a sterile sporicidal disinfectant in pre-diluted form made from peracetic acid, hydrogen peroxide and ultrapure water. The product can be used to wipe down equipment and hard surfaces (floors, walls and ceilings). InSpec OX is manufactured according to GMP standards in an ISO 6 clean room. The sporicide is filled and capped under an ISO Class 5 laminar flow. The solution is aseptically filled through a 0.2 µm filter into sterile packaging. Material & Properties Active ingredient: solution of 0.4% peracetic acid (PAA), 6% hydrogen peroxide (H2O2) and ultrapure water GMP A/B One of the most effective sporicides known Bactericidal and fungicidal (fungicidal), EN 1276, EN 1650, EN 13697 Shows spore-killing effect according to EN 13704 for Bacillus 5 minutes Double packed Ideal in rotation with InSpec AN and InSpec QT Produced according to GMP Fast action ( 5 log reduction of spores in 90 seconds. Acts on all microorganisms (very broad spectrum of activity) Very low residue on drying Classified as irritant, low hazard Stabilised solution - 24 months shelf life Packaging double packed 6 bottles in one carton

ClearKlens DE VH29 is a disinfectant for use in cleanrooms in the pharmaceutical and medical manufacturing industry. It is based on 70% alcohol and 10 ppm Bitrex. ClearKlens DE VH29 is 0.2µm filtered, irradiated and double packaged and is supplied as a 900ml ready to use solution.The bottle in which ClearKlens DE VH29 is supplied has no back suction due to a special device which protects the contents of the bottle against contamination during use of the product. Material & Properties Active ingredient: 70% ethanol / 30% WFI water plus 10ppm Bitrex Clear, colourless liquid GMP A/B Ready to use for the disinfection of work surfaces and equipment in cleanrooms 0.2 µm filtered Sterile Gamma-irradiated (900 ml spray bottle) or sterile filtered (5 litre canister) Sterility test in accordance with the European Pharmacopoeia Provided with a physical-chemical analysis and irradiation certificate (Detex) Odourless No discolouration Low toxicity Wide range of applications Double-packed for easy transport to cleanrooms Packaging 1 bottle double packed 6 bottles in one carton

Sterile ClearKlens Cleansinald SC VH9 is a concentrated, surface-active, cleaning disinfectant/concentrate from Diversey for use in clean rooms in the pharmaceutical and medical industries, based on alkylamine and quaternary ammonium compounds. It can be used on all common materials in these areas, provided the instructions for use are followed. If in doubt, it is advisable to test the compatibility with specific materials before long-term use. The disinfectant has been comprehensively tested in accordance with DIN EN 1040, EN 1276 and EN 1650. Material & Properties Based on alkylamines and quaternary ammonium compounds (QAC) ISO 5 GMP A/B Suitable for disinfecting walls, floors, ceilings and equipment in the pharmaceutical and medical manufacturing industry 0.2 µm filtered Aseptically filled Double packaged for easy transport into clean rooms Supplied in 25 ml single doses Low toxicity Broad spectrum of activity Suitable for spraying, wiping and mopping applications. No rinsing required for non-product contact surfaces Smaller items or removed equipment parts can be immersed in ClearKlens Cleansinald SC solution Packaging 5 pieces individually packaged in an outer bag 10 outer bags in a carton (50 pieces)

InSpec N7 is a ph-neutral detergent suitable for manual cleaning. It contains a low level of buffered non-ionic sequestrants. It can be used on most cleanroom surfaces and removes a wide range of residues from floors, walls, ceilings and equipment exteriors. Material and Properties Low concentration filtered through a 0.2 micron filter 3 months validated 'in-use' shelf life made with WFI quality water Manufactured according to GMP Iso recommendation: 5 GMP: C/D Advantages Designed for cleaning floors, walls, ceilings and other hard surfaces to remove process-related residues and light soiling Ideal for critical surfaces with soiling in the vicinity of product manufacture Very low foaming, low residue detergent with an excellent low toxicological profile Suitable for manual cleaning and available in convenient ready-to-use and concentrated formats Packaging 6 bottles in carton

Contec ProChlor is a spore-destroying biocide with a germ reduction of 6 log levels in under 60 seconds (*EN 13704), which is effective against bacteria, fungi, moulds, yeasts, viruses and spores. The sporicide has been specially developed for use in pharmaceutical cleanrooms through filtration and double packaging. Probably the fastest acting sporicide on the market. It is manufactured in a controlled environment and filtered to 2 μm. It is particularly suitable for class C and D cleanrooms where a fast-acting and effective sporicide is required. Contec ProChlor has no hazard classification, good user acceptance and high material compatibility. Material & properties Material: Hypochlorous acid mixed with distilled water 2000 ppm hypochlorous acid in distilled water Ready to use with a shelf life of two years Filtered to 5 microns. Double packed in linear tear polythene bags. GMP C/D Future productions: 0.2 micron filtered, 24 months shelf life Contec ProChlor is low in residues, but if residues do occur, they can be easily removed with water or alcohol Contains no quaternary ammonium or surfactants - Very little residue, which saves time when removing residues Good suitability for the user as there is no strong odour Personal protective equipment is not required Special disposal is not necessary fast acting - kills spores on a surface in less than 1 minute suitable for cleanrooms - is filtered in a controlled environment and double packaged fully validated - supplied with a test kit to EN standards safe to use - non-harmful, non-corrosive and non-disposable Packaging 6 bottles in a carton

NeutraKlean SBT103NK is a sterile neutral detergent with purified water (EP) NeutraKlean is a gentle and non-foaming neutral detergent designed for life science cleanroom cleaning. With a neutral pH (pH7 +/- 1) after irradiation, NeutraKlean is ideal for the low level cleaning required after maintenance and to remove disinfectant residues and general soiling. The product is 0.2 μm filtered and filled under Class A air and packaged in a Class C cleanroom. The product is supplied in two sachets and is designed to be easily introduced into pharmaceutical cleanrooms. The product is filtered ready for use. Material & Properties Colourless sterile with spray head neutral cleaning agent with distilled water pH value between 6.5 and 7.5 the container with lid is ideal for larger areas Filtered to 0.2 microns under Grade A airflow in a Grade C cleanroom Low foaming cleaning action - Ideal for use on floors/walls and benches Double wrapped in linear tear pack packaging Each bag is easy to open even with gloves on Facilitates transfer disinfection in isolators and RABS Packaging individually packed 6 bottles in a carton

The sterile, sporicidal disinfectant ClearKlens Bi-Spore VH26 is a two-component system from Diversey for producing a solution with 250 ppm chlorine dioxide. It consists of a base and an activator (2x 100 ml). It is suitable for disinfecting surfaces and equipment in the particularly critical sterile areas of the pharmaceutical and medical industries. Product characteristics Manufactured in compliance with GMP guidelines (Good Manufacturing Practices) in an ISO class 5 environment (EU GMP class A) on an ISO class 7 substrate (EU GMP class C) 0.2 µm filtered Aseptically filled Double packaged ClearKlens Bi-Spore consists of 2 x 100 ml bottles. With 4.8 litres of WFI water (Water for Injection), these make an application solution of 5 litres Very good sporocidal effect after just 5 minutes exposure time (in accordance with DIN EN 13704) Broad spectrum of effectiveness Detex label for proof of irradiation Base and activator are each double-packed to simplify transport to the cleanroom Suitable for wipe and mop application Standards and guidelines: Cleanroom class according to DIN EN 14644-1: ISO 5 / EU-GMP A/B European Biocide Directive 98/8/CE DIN EN 1276, DIN EN 13697 (bactericidal) DIN EN 1650 (fungicidal), DIN EN 13697 (fungicidal: levorucidal effect) DIN EN 14476 (poliovirus and adenovirus) Virucidal: Avian influenza H3N8 How to use ClearKlens Bi-Spore is suitable for wiping and mop application. add 100 ml ClearKlens Bi-Spore-Activ to 4.8 litres of water. Then immediately add 100 ml ClearKlens Bi-Spore Base. Allow to stand for 2 minutes before use. Use the solution within 24 hours. Technical data Appearance: Clear, colourless to light yellow liquid pH value: 2.5 - 5.0 Density (20°C): 1.0 - 1.01 g/cm3 Total potential CIO2 content: 230 - 280 ppm Packaging 2 pieces with 100ml in a bag 25 bags in a carton

InSpec OX is a sterile sporicidal disinfectant in pre-diluted form made from peracetic acid, hydrogen peroxide and ultrapure water. The product can be used to wipe down equipment and hard surfaces (floors, walls and ceilings). InSpec OX is manufactured according to GMP standards in an ISO 6 clean room. The sporicide is filled and capped under an ISO Class 5 laminar flow. The solution is aseptically filled through a 0.2 µm filter into sterile packaging. The pre-preparation bags are sterile sporicidal burstable wipes. For hard cleanroom work surfaces. 100 ml contains approx. 0.4 ml peracetic acid, 6 ml hydrogen peroxide, 5 ml acetic acid formulation and 88.6 ml distilled water. Material & properties Active ingredient: Solution of 0.4% peracetic acid (PAA), 6% hydrogen peroxide (H2O2) and ultrapure water GMP A/B One of the most effective sporicides known Bactericidal and fungicidal (fungicidal), EN 1276, EN 1650, EN 13697 Shows spore-killing effect according to EN 13704 for Bacillus 5 minutes Double packed Ideal in rotation with InSpec AN and InSpec QT Produced according to GMP Fast action ( 5 log reduction of spores in 90 seconds. Acts on all microorganisms (very broad spectrum of activity) Very low residue on drying Classified as irritant, low hazard Stabilised solution - 24 months shelf life Microbiological efficacy (min. contact) EN 1276 Bacteria 5 min. EN 13697 Bacteria 5 min. EN 13697 Fungi 15 min. EN 1650 Fungi 15 min. EN 13704 B.subtills 2 min. 2 years Shelf life Packaging 15 wipes in a pre-preparation bag 20 bags in carton

Contec IPA is a mixture of 70 % v/v isopropanol with distilled water. The alcohol mixture is filtered to 0.2 microns in a class C clean room (ISO class 7) and filled into bags. It is supplied in 1 litre atomiser bottles equipped with a protection system or in 5 litre containers with lids for larger areas. An atomiser bottle with a closed "bag-in-bottle" system prevents contamination of the bottle contents during use. Features & benefits manufactured to GMP (Good Manufacturing Practice) under Class A laminar flow in a Class C cleanroom to ensure alcohol, containers and packaging are free from contamination and particulates Atomiser bottle and bag-in-bottle protection system prevent bottle contents from becoming contaminated during use Bottles can be emptied completely, so no product is wasted or has to be disposed of during the shelf life Atomiser bottle has a jet and atomiser option - large droplet size reduces the risk of inhalation and provides good area coverage double packaged with long side opening so the pouch can be easily opened even when wearing gloves

SatPax® 550 wipes are made from exceptionally clean 100% meltblown polypropylene, pre-moistened with 70% IPA and 30% DI water. Material & Properties 100% meltblown polypropylene Pre-moistened with 70% IPA | 30% DI water Offers a cost-effective and easy-to-use solution compared to traditional solvent handling No chemical binders in the base material Resealable, solvent-resistant packaging Wipes in C-fold configuration for single removal Very low extractives and ions Very low particle and fibre counts Excellent wet strength and abrasion resistance Reduces alcohol consumption and the costs of preparing and handling alcohol Reduces VOC emissions Increases cleaning efficiency Increases consistency of cleaning protocol Reduces VOC (volatile organic compound) emissions Lightweight construction reduces waste disposal pounds compared to typical heavier nonwoven products Complies with RoHS Registered under REACH Designed for use in ISO Class 5 and higher cleanroom environments and for USP <797> applications Designed for use in wet cleaning of critical surfaces where control of flammable solvents and flammable solvent concentrations is required Final cleaning of surfaces or products prior to manufacturing or packaging. High saturation level is ideal for removing cleaning residues in regulated environments. EC Regulation 1935 (2004) – Food contact compliant. FDA 21 CFR - compliant for food contact Packaging Box of 50 wipes

Das "Contec HydroPure SATWipes System" besteht aus 6% Wasserstoffperoxid gemischt mit gereinigtem Wasser und Amplitude Theta Polyester/Cellulose-Tücher. Contec HydroPure ist wirksam gegen Bakterien, Pilze, Schimmelpilze und Hefen und hinterlässt nur wenige bis keine Rückstände, was es ideal für den Einsatz in kritischen Bereichen macht. Contec HydroPure wird als Point-of-Use SATWipes-System angeboten. Jede Doppelbeutelverpackung enthält einen Behälter mit 100 x 54 g/m² Amplitude Theta Polyester/Zellulose-Trockentücher und eine 500 ml verschlossene Flasche Contec HydroPure. Das sterile Produkt wird in vorbestrahlte Komponenten gefiltert. Das trockene Tuch Kanister wird mit nicht weniger als 25 kGy bestrahlt. Material & Eigenschaften Material Tücher: Poyester/Cellulose Länge Tücher: 150 mm Breite Tücher: 230 mm Basisgewicht: 54 g/m2 Bequeme und kontrollierte Anwendung von Desinfektionsmitteln Wasserstoffperoxid zerfällt in Wasser & Sauerstoff Schnell und einfach zu verwenden. Sehr geringe Rückstände, daher geeignet für kritische Bereiche Zeitersparnis, da keine Rückstandsentsorgung erforderlich ist 100 Polyester-/Cellulosetücher im Kanister Ideal für einen Bereich der Klasse A / B Komfortabel in der Anwendung und ermöglicht eine kontrollierte Anwendung. Gefiltert auf 0,2 Mikrometer in einem Reinraum der Klasse B - Stellt sicher, dass das Produkt frei von Verunreinigungen und Partikeln ist Wird steril geliefert Geeignet für Reinräume der Klasse A und B Nicht als korrosiv eingestuft Gute Akzeptanz durch den Bediener als geruchs- und gefahrenarm Doppelt verpackt in linearer Aufreißverpackung Jede Tasche lässt sich auch mit Handschuhen leicht öffnen Produktspezifikation Contec HydroPure 500ml Verschlossene Flasche mit Deckel Gebrauchsfertig mit einer Haltbarkeit von 12 Monaten 0,2 Mikron gefiltert Aseptisch abgefüllt unter UDAF Klasse A in einem Reinraum der Klasse B Verpackung 100 Tücher in einem Behälter und eine 500 ml Flasche Hydropure doppelt verpackt 10 Behälter in einem Karton Produktanwendung Gießen Sie 500ml Contec HydroPure in die Mitte der Wischtuchrolle. Schließen Sie den Deckel und drehen Sie den Behälter mehrmals um, bis die gesamte Flüssigkeit in die Tücher eingezogen ist. Dieses sollte weniger als 5 Minuten dauernSobald die Tücher mit Contec HydroPure gesättigt sind, sind sie für die sporizide Desinfektion geeignet.Die Tücher sollten innerhalb von 7 Tagen verbraucht und dann entsorgt werden. Auf der Vorderseite des Behälters ist Platz für die Angabe des Haltbarkeitsdatums

The InSpec HA sporicidal disinfectant wipes are supplied in an innovative pre-preparation bag. The wipes are not yet soaked, but the liquid is in a separate part of the bag. When the wipes are needed, the liquid can be easily squeezed into the area of the wipes to pre-moisten them. Material & Properties Active ingredient: Hypochlorous acid / WFI water Material: Mixture of cellulose and synthetic fibres Dimensions: approx. 23x23 cm Weight: 68 g/m² Solves the problem of negative interaction between cloth and disinfectant, eliminates excessive particle generation and poor disinfection performance Solves the problem of maintaining the disinfectant properties of impregnated wipes over the full shelf life Low odour Low toxicity Low hazard Low residue Diluted with water in WFI quality Packaging 15 wipes in a bag 20 bags in a carton

This polyester microfibre mop with non-woven medium offers excellent absorbency and is designed for cleaning with disinfectants on horizontal and vertical surfaces. It is ideal for general cleaning and disinfection of ceilings, walls and floors in critical environments. The microfibre material glides gently over floors and textured surfaces and ensures excellent removal of contaminants. vertical surfaces and is ideal for general cleaning and disinfection of ceilings, walls and floors in critical environments. The microfibre material glides gently over floors and textured surfaces and provides excellent soil removal. Material & Properties Material: Polyester microfibre, nylon Colour: White Length: 398 mm +/- 5 mm Width: 122 mm +/- 5 mm sterile Absorption capacity: >305 ml/mop (>6280 ml/m2) Particles: IEST-RPcc003.2 Helke Drum test <3500 particles per mop >0.5 µm Weight: 900 g (+/- 0.045) Packaging 2 mops in one bag 10 bags in one carton

ClearKlens Cleansinald RTU VH9S sterile disinfectant is a ready-to-use disinfectant for all types of surfaces in clean rooms in the pharmaceutical and medical industries. It can be used on all common materials found in these areas, provided the instructions for use are followed. If in doubt, it is recommended to test compatibility with specific surfaces before permanent use. The disinfectant has been comprehensively tested in accordance with DIN EN 1040, EN 1276, and EN 1650. Particularly suitable for areas of cleanroom classes EU-GMP A and EU-GMP B. Material & properties Based on alkylamines and quaternary ammonium compounds (QAC) Appearance: Clear, colorless to light yellow liquid pH value (20°C): 9.0 - 11.4 Density (20°C): 1.0 ± 0.005 g/cm3 Chemical oxygen demand (COD): 3 mg O2/g ISO 5 GMP A/B 0.5% solution of ClearKlens Cleansinald concentrate mixed with WFI (Water for Injection) water and then filtered with a 0.22 µm filter Suitable for disinfecting walls, floors, ceilings, and equipment in clean rooms in the pharmaceutical and medical manufacturing industry Suitable for spray and mop application 0.22 µm filtered Sterile filtered Aseptically packaged Double-packed to simplify transport to the cleanroom Packaged under cleanroom conditions in double, separately sealed PE bags and radio sterilized before filling Broad spectrum of efficacy Low toxicity Supplied with a certificate of conformity Ready to use Packaging 4 canisters in a cardboard box

The Vipers StarSat VPP36 is a pre-moistened nonwoven meltblown cloth with a mixture of isopropyl alcohol and deonized water. It provides faster, more effective and more accurate cleaning than the alternative dry wipes used manually with alcohol or other cleaning fluids in workplaces. The resealable bags prevent the evaporation of solvents. Material & Properties Material: 100% meltdown polypropylene Length: 230 mm Width: 280 mm Thickness: 0,24 mm Color: white Basis weight 36 ± 3 g/m² ISO 5 Pre-moistened nonwoven cloth With 70% IPA (isopropyl alcohol) / 30% deionized water Resealable bag For general wiping and cleaning in critical environments Absorption capacity/speed 174 ml/m² 1.0 sec Packaging 30 wipes in a resealable bag20 bags in a carton

Alcohol-based surface disinfectant ClearKlens IPA VH1 sterile. A sterile, ready-to-use disinfectant from Diversey with a broad spectrum of activity for cleanrooms in the pharmaceutical industry based on 70% isopropanol and 30% WFI (Water for Injection) water. The product is produced in facilities certified to ISO 9001 and ISO 14001 (Class A / B). ClearKlens IPA has been extensively tested in the suspension test according to EN 1276 and EN 1650 as well as in the surface test according to EN 13697. These showed that it has a broad spectrum of activity against both Gram-positive and Gram-negative bacteria, yeasts and fungi. Material & properties Clear liquid free of insoluble particles Ready-to-use for the disinfection of work surfaces and processing equipment in cleanrooms Solution of 70% isopropanol and 30% WFI water 0.2 µm filtered Sterile ISO 5 GMP A/B Gamma irradiated Provided with a physical-chemical analysis and irradiation certificate (Detex) Odourless Non-perishable Low toxicity No discolouration Wide range of applications Double-packed for easy transport to cleanrooms Standards and guidelines Cleanroom class according to DIN EN 14644-1: ISO 5 / GMP A/B European Biocide Directive 98/8/CE DIN EN 1276, DIN EN 13697 (bactericidal) DIN EN 1650, DIN EN 13697 (fungicidal) Technical data pH value: 6.0 - 9.0 Density (20°C): 0.865 - 0.85 Alcohol content: 70% +/- 1% w/w Packaging double packed 6 bottles in a carton