The PROSAT PS-HS9-7030-BPR is made from filament polyester that is laser cut to bond the fibres at the edges of the wipe. This creates a very clean, non-abrasive edge that allows full use of the surface of the wipe. The wipe is chemical resistant and exceptionally low in particulates and extractable particles and extractable residues, making it ideal for general and critical cleaning. The pre-treatment reduces solvent consumption, reduces the VOC IPA associated, and maximises process control and consistency. Material & Properties Material: Polyester Length: 230 mm Width: 230 mm Pre-moistened with: 70% isopropanol, 30% deionised water Base weight: 140 g/m2 recommended for ISO class 4-8 environments sealed edges reduce particle and fibre formation abrasion and chemical resistant low amount of particles and extractable contaminants resealable bag maintains the purity and saturation level of the solvent Packaging 30 wipes in a resealable inner bag 10 inner bags in an outer bag 3 outer bags in a carton (900 wipes)

These sterile disinfectant wipes are individually packaged in tear-open sachets. They are saturated with a solution of 70% IPA and water of WFI quality. Low residue Fast-acting Bactericidal and fungicidal

PROSAT ® Sterile Polynit Heatseal LE wipes are made from 100% Polynit Heatseal polyester knit fabric and are pre-soaked in a mixture of 70% IPA and 30% water for injection (WFI). Each batch is tested prior to release and certified to have a low endotoxin content of less than < 1 endotoxin unit per wipe. The sealed edges of the wipe ensure that very few particles and fibres are released. It is therefore ideally suited for use on surfaces that come into contact with products. Each resealable pouch contains a small number of wipes to minimise waste after cleaning. Each pouch is triple-packed to facilitate easy transport into the sterile environment. Pre-soaked wipes offer numerous advantages, including solvent control, a reduction in volatile organic compounds (VOCs), as well as enhanced process control and repeatability. The resealable pouch helps to reduce waste. PROSAT Sterile Polynit Heatseal LE wipes are validated as sterile and are ideal for use in aseptic environments and critical pharmaceutical cleanrooms. Features & Benefits Recommended for Class A/B or ISO Class 5 environments – product-contact areas 100% polyester knit for very low particle and fibre counts laser-sealed edges reduce fibre shedding at the edges of the wipe guaranteed endotoxin content of < 1 EU/unit, making it ideal for product-contact surfaces small number of wipes per resealable pouch, to minimise waste small hanging pouches are available, making them ideal for use in isolators and RABS pre-saturated wipes reduce VOC emissions and solvent consumption the resealable pouch maintains the purity and saturation level of the solvent

Das sterile  vorgefeuchtete Reinraumtuch von Contec besteht aus einem in IPA (Isopropanol) 70% und DI-Wasser 30% getränktem meltblown Polypropylen. Die Tücher sind komfortabel in flachen wiederverschließbaren Beuteln zu 50 Tüchern abgepackt. Gamma-sterilisiert Einsatzgebiete: Pharmazeutische Industrie Biotechnologie Medizintechnik

The sterile (gamma-sterilised) pre-moistened cleanroom wipe PROSAT PI PS-314IR-BPR from Contec is made from split microfibres of polyester and nylon, which enhance the cleaning performance and the ability to absorb contaminants. The microfibre fabric has a high absorption capacity and releases the alcohol in a controlled manner onto the surface. Thanks to this controlled release, the surface coverage per wipe is greater than with other pre-moistened wipes of comparable weight. Material & Properties 70% polyester / 30% nylon Colour: White Basis weight: 80 g/m² In deionised water: 0.034 g/m² In isopropanol: 0.017 g/m² Particles P > 0.5µm; (x10⁶/m²): 11.20 Fibres > 100 µm; (x10³/m²): 11.96 Cleanroom class ISO 5 GMP A/B Gamma-sterilised SAL 10-6 Hydroentangled microfibre Heavy microfibre Effective against bacteria in 1 minute and against yeasts in 3 minutes Approved for sale in accordance with EU and UK regulations on biocidal products. (Contec IPA wipes: EU 0020460 0002 1-2) Flat, resealable pouch Areas of application Pharmaceutical industry Biotechnology Medical technology Packaging 1 inner pouch containing 20 wipes 10 inner pouches in 1 outer pouch (sterile) 4 outer pouches per box (800 wipes)

The PROSAT PI PS-314-BPR pre-moistened cleanroom wipe from Contec is made of split polyester and nylon microfibre, which improves the cleaning effect and ability to absorb contaminants. The microfibre fabric has a high absorption capacity and releases the alcohol to the surface in doses. Due to the metered release, the surface coverage per wipe is greater than with other pre-soaked wipes of comparable weight. Material & properties 70 % polyester / 30 % nylon Colour white Base weight 80 g/m2 In deionised water: 0.034 g/m2 In isopropanol: 0.017 g/m2 Particles P > 0.5µm; (x106/m2): 11.20 Fibres > 100µm; (x103/m2): 11.96 Cleanroom class ISO 5 GMP C/D Hydroentangled microfibre Heavy microfibre effective against bacteria in 1 minute and against yeasts in 3 minutes authorised for sale under the EU and UK Biocidal Products Regulation. (Contec IPA wipes : EU 0020460 0002 1-2) Flat, resealable pouch Fields of application Pharmaceutical industry Biotechnology Medical technology Packaging 1 inner bag with 20 wipes 10 inner bags in 1 outer bag 4 outer bags in a carton (800 wipes)

Alternatives Cleaning Wipe InSpec IPA Standard The Inspec Premium Tub Wipes are sterile, ready-to-use disinfectant wipes. They are pre-soaked with a mixture of 70% v/v alcohol solution in WFI quality water. InSpec IPA wipes, an economical solution for wiping applications. Material & Properties Wipes material: Polyester 45% /Cellulose 55% Pre-soaked: 70% v/v alcohol solution in WFI quality water Length: 200 mm Width: 170 mm Thickness: 290 micron Colour: white Dry tensile strength MD (N/50mm) 117.1 N/m Dry tensile strength CD (N/50mm) 32.4 N/m Wet tensile MD (N/50mm) 92.6 N/m Wet tensile CD (N/50mm) 23.1 N/m Absorption capacity 612.16%. Absorption time 1.9s Packaging 130 wipes in a dispenser box 12 dispenser boxes in a carton

The Contec PROSAT PSPP0043 polypropylene wipes are impregnated with a solution of 70% isopropanol and 30% DI water. They are packaged in resealable bags. This ensures even and uniform application of the solution to a surface. Material & properties Material: Polypropylene Colour: White Base weight: 36g/m2 ISO 5 Dimensions: 230 x 280 mm Pre-moistened with a solution of 70 % isopropanol alcohol and 30 % deionised water Very pure Very low sodium content Meltblown nonwoven construction flat, resealable bag Packaging 50 wipes in a bag 40 bags in a carton

The sterile PROSAT Vial Wipes HCPS6044 are made from 100% Nowoven polyester pre-saturated with a mixture of 70% IPA and purified water. It has a low particle release and is therefore ideal for use in cleanrooms. The small high quality wipes can be used instead of sterile, individually wrapped alcohol prep wipes, which generate more waste and particles. The flat peel and re-seal packaging offers both quick access and easy closure and requires minimal space, making it suitable for small cleanrooms such as isolators. Material & Features Material: 100% polyester Length: 100 mm Width: 100 mm Base weight: 67 g/m2 ISO 5 GMP A/B Pre-saturated with 70% IPA and 30% purified water Reduces VOCs Controlled saturation level Effective and fast drying disinfection Resealable pouch  Packaging 60 wipes in a resealable inner bag 4 inner bags in an outer bag 2 outer bags in a sterile outer bag 3 outer bags in a carton (1440 wipes)

The Inspec Tub Wipes are sterile, ready-to-use disinfection wipes. They are pre-soaked with a mixture of 70% v/v alcohol solution in WFI quality water. InSpec IPA Wipes, an economical solution for wiping applications. Material & Properties Wipes material: Polyester 45% /Cellulose 55% Pre-soaked: 70% v/v alcohol solution in WFI quality water Length: 200 mm Width: 200 mm Thickness: 290 micron Colour: white Dry tensile MD (N/50mm) 117,1 N/m Dry tensile strength CD (N/50mm) 32,4 N/m Wet tensile MD (N/50mm) 92.6 N/m Wet tensile CD (N/50mm) 23,1 N/m Absorption capacity 612.16%. Absorption time 1,9s Packaging 200 wipes in a tub 12 tub in one carton

BPR listed InSpec IPA wet wipes are a ready to use disinfectant. It is a 70% v/v alcoholic solution with WFI grade water. InSpec IPA Wet Wipes are manufactured in a clean room in accordance with Good Manufacturing Practice (GMP). The solution is filtered through a 0.2 micron filter. InSpec IPA pouch wipes are highly specialised cleanroom wipes in a pouch with low linting. Material & Properties Material: 55 % cellulose, 45 % polyester Soaked with 70 % IPA/30 % WFI water Length: 230 mm Width: 230 mm Basic weight: 65.93-72.87 g/m² Thickness: 320 μm sterile Dry tensile strength machine direction (N/50 mm): 199.3 N/m2 Dry tensile strength transverse direction (N/50 mm): 55.4 N/m2 Wet tensile strength machine direction (N/50 mm): 144.8 N/m2 Wet tensile strength transverse direction (N/50 mm): 1.10 N/m2 Absorption capacity: 366-448 % Absorption time: 2.23-2.73 s Microbiological contact test for minimum effectiveness EN 1276 Bacteria 5 minutes EN 13697 Bacteria 5 minutes EN 1650 Fungi 15 minutes EN 13697 Fungi 15 minutes Packaging 50 wipes in one bag 16 bags in one carton